Messages in this thread | | | From | Eric Miao <> | Date | Tue, 26 Jan 2010 19:39:40 +0800 | Subject | Re: gpio_keys and how PXA27x sets gpio_set_wake() (was Re: sharp c-3000 aka spitz: fix warn_on introduced in 2.6.32-rc1) |
| |
2010/1/26 Stanislav Brabec <utx@penguin.cz>: > Eric Miao wrote: >> 2010/1/26 Stanislav Brabec <utx@penguin.cz>: > >> > Handling platform specific edge/level wake setup would only complicate >> > the code. (In fact, even the PXA270 platform code does not exist yet - >> > arch/arm/mach-pxa/mfp-pxa2xx.c:__mfp_config_gpio() is not capable to >> > configure Power Manager Keyboard Wake-Up Enable Register (PKWR).) >> That's why WAKEUP_ON_EDGE_* is introduced, no need for gpio-keys >> to know this. > > But WAKEUP_ON_EDGE_* is impossible for GPIO 95, > enable_irq_wake()/gpio_set_wake() returns EINVAL and disable_irq_wake() > complains on "Unbalanced IRQ 191". >
Now I see, but I don't know why disable_irq_wake() will complains about unbalance since it should really manage it well.
A quick dirty solution would be the platform to call keypad_set_wake() directly somewhere. Otherwise we have to let gpio_set_wake() to handle those keypad GPIOs and to live together with keypad_set_wake() happily, which is really difficult.
> In case of Zaurus, gpio_keys.c have to live with wakeup on level (PKWR) > when using enable/disable_irq_wake(). > >> > The problem affects gpio_keys: It is a driver implementing "one key per >> > gpio". It now handles On/Off and lid switches on Zaurus. Lid switches >> > are on "normal" GPIOs, On/Off switch is wired to PKWR capable GPIO. >> Ain't On/Off switch one of the matrix key? And so SPITZ_GPIO_KEY_INT >> could be used to handle that? > > No. On/Off is connected directly to GPIO 95. Other keys use strobe/sense > matrix keypad. > > SPITZ_GPIO_KEY_INT is a bit unspecific. I think it means: Charger was > inserted or key was pressed or On/Off was pressed. > > > > ________________________________________________________________________ > Stanislav Brabec > http://www.penguin.cz/~utx/zaurus > >
| |