lkml.org 
[lkml]   [2010]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: Linux 2.6.33-rc5
    From
    On Sun, Jan 24, 2010 at 2:08 PM, Borislav Petkov
    <petkovbb@googlemail.com> wrote:
    > On Sun, Jan 24, 2010 at 10:30:22AM -0800, Linus Torvalds wrote:
    >> On Sun, 24 Jan 2010, Borislav Petkov wrote:
    >> >
    >> > 1. After suspend, the right monitor shows very funny colors, as if it is
    >> > on crack, in contrast to the left one which looks fine:
    >> >
    >> > http://userweb.kernel.org/~bp/right_monitor.jpg
    >> > http://userweb.kernel.org/~bp/left_monitor.jpg
    >>
    >> Ok, at a guess, it looks like something isn't restoring the palette
    >> registers for the second output. You didn't say what GPU you have, but
    >> judging by your CC list, it's a radeon. You might want to let the Radeon
    >> KMS people know exactly what your setup is etc.
    >
    > Good guessing, it's a radeon HD 3600 series (RV635 chip), pci
    > vendor/device id: 1002:9598, using radeonhd driver.

    radeonhd does not support KMS, so if you have kms enabled, you will
    likely run into issues as both the drm and radeonhd will be trying to
    drive the hardware. If you want to use KMS, use the radeon driver
    (xf86-video-ati), otherwise, disabled KMS.

    Alex

    >
    > More specifically,
    >
    > 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3600 Series (prog-if 00 [VGA controller])
    >        Subsystem: ASUSTeK Computer Inc. Device 01da
    >        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    >        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR+ <PERR- INTx-
    >        Latency: 0, Cache Line Size: 64 bytes
    >        Interrupt: pin A routed to IRQ 18
    >        Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
    >        Region 2: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K]
    >        Region 4: I/O ports at d000 [size=256]
    >        Expansion ROM at feac0000 [disabled] [size=128K]
    >        Capabilities: [50] Power Management version 3
    >                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    >                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    >        Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
    >                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
    >                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
    >                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    >                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    >                        MaxPayload 128 bytes, MaxReadReq 128 bytes
    >                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
    >                LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
    >                        ClockPM- Surprise- LLActRep- BwNot-
    >                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
    >                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    >                LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    >                DevCap2: Completion Timeout: Not Supported, TimeoutDis-
    >                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
    >                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
    >                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    >                         Compliance De-emphasis: -6dB
    >                LnkSta2: Current De-emphasis Level: -6dB
    >        Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
    >                Address: 0000000000000000  Data: 0000
    >        Capabilities: [100] Vendor Specific Information <?>
    >
    > X.org says:
    >
    > (II) Primary Device is: PCI 01@00:00:0
    > (**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
    > (**) RADEONHD(0): Option "AccelMethod" "exa"
    > (**) RADEONHD(0): Option "DRI" "on"
    > (**) RADEONHD(0): Selected EXA 2D acceleration.
    > (II) RADEONHD(0): Card not in database: 0x9598:0x1043:0x01DA; using generic modesetting.
    >        If - and only if - your card does not work or does not work optimally
    >        please contact radeonhd@opensuse.org to help rectify this.
    >        Use the subject: 0x9598:0x1043:0x01DA: <name of board>
    >        and *please* describe the problems you are seeing
    >        in your message.
    > (--) RADEONHD(0): Detected an RV635 on an unidentified card
    >
    > config attached.
    >
    > --
    > Regards/Gruss,
    >    Boris.
    >
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2010-01-25 04:49    [W:3.161 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site