lkml.org 
[lkml]   [2010]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: Strange EHCI/OHCI IRQ and other PCI errors on boot with 2.6.32 (which 2.6.26 did not see) on Geode LX/CS5536.
    On Wed, 20 Jan 2010, Lennart Sorensen wrote:

    > On Wed, Jan 20, 2010 at 03:20:46PM -0500, Alan Stern wrote:
    > > Okay, this means that something else is affecting the IRQ line.
    >
    > Yep. I went and disabled irq5 on the LPC bus, and that didn't help.
    >
    > > > Interestingly the number of interrupts listed in /proc/interrupts is
    > > > exactly 300000.
    > >
    > > That's probably because the kernel disabled the IRQ after 100000
    > > unhandled interrupts, and re-enabled it each time a new device was
    > > registered for that IRQ.
    >
    > Certainly seems to be the case.
    >
    > > Or you could just stop using USB on the old box. :-)
    >
    > Well I just tried another box, and same thing.
    >
    > If I boot with 'irqpoll' then everything seems fine.
    >
    > Any idea how I can figure out why irqpoll makes it happy? Does it give
    > any reports anywhere about misrouted irqs?

    Not that I know of.

    Does 2.6.26 fail on the new machine?

    Are you using a .config different from the one that used to work with
    2.6.26?

    Alan Stern



    \
     
     \ /
      Last update: 2010-01-20 23:09    [W:0.031 / U:31.760 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site