lkml.org 
[lkml]   [2010]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] af_packet: Don't use skb after dev_queue_xmit()
On Mon, Jan 18, 2010 at 04:39:24PM -0500, Michael Breuer wrote:
> Some output from tc -s qdisc:
...
> After the conclusion of the test:
> qdisc pfifo_fast 0: dev eth0 root refcnt 2 bands 3 priomap 1 2 2 2
> 1 2 0 0 1 1 1 1 1 1 1 1
> Sent 244900497 bytes 3416350 pkt (dropped 0, overlimits 0 requeues 0)
> rate 0bit 0pps backlog 0b 0p requeues 0
> qdisc pfifo_fast 0: dev eth1 root refcnt 2 bands 3 priomap 1 2 2 2
> 1 2 0 0 1 1 1 1 1 1 1 1
> Sent 564380 bytes 4708 pkt (dropped 0, overlimits 0 requeues 0)
> rate 0bit 0pps backlog 0b 0p requeues 0

Great!

>
>
> During the test, 8.9GB received; 232.9MB sent).
>
> I also connected a second device through the wifi router. I was able
> to ping that device w/o loss while DHCP packets were being dropped
> to the other connected device.

Could you remind us if the problem is always with this first device?
Btw, I wonder if you could test it skipping the (HP?) switch?

Jarek P.


\
 
 \ /
  Last update: 2010-01-18 23:11    [W:0.100 / U:0.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site