lkml.org 
[lkml]   [2010]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectHDA Intel Audio hang on boot
Renaming this bug as the "only 1 CPU" bug has been fixed, but the hang
at HDA remains.
I shall plug in a SB Audigy and see if it will boot with that.
By disabling the on-board HDA Intel audio in the BIOS, the system boots.
tindog:~ # uname -r
2.6.33-rc4-smp
On 2.6.32-git1 which boots, hwinfo shows:-
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
oss.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA hardware specific Device'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia ALSA Control Device'
alsa.card_id = 'HDA NVidia'
info.product = 'HDA NVidia Sound Card'
sound.card_id = 'HDA NVidia'
info.linux.driver = 'HDA Intel'
22: 489835 578 IO-APIC-fasteoi sata_nv, HDA Intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module = snd_hda_intel
irq:0 22 ( 490413) "sata_nv" "HDA Intel"
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module = snd_hda_intel
HDA Intel: /devices/pci0000:00/0000:00:0e.1
HDA Intel: module = snd_hda_intel
E: DRIVER=HDA Intel
<6>HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level,
low) -> IRQ 22
<7>HDA Intel 0000:00:0e.1: setting latency timer to 64
Driver: "HDA Intel"

Regards
Sid.

On 11/01/10 03:39, Sid Boyce wrote:
> On 10/01/10 22:32, Rafael J. Wysocki wrote:
>> This message has been generated automatically as a part of a report
>> of recent regressions.
>>
>> The following bug entry is on the current list of known regressions
>> from 2.6.32. Please verify if it still should be listed and let me know
>> (either way).
>>
>>
>> Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=14946
>> Subject : All kernels after 2.6.32-git10 show only 1 CPU
>> Submitter : Sid Boyce <sboyce@blueyonder.co.uk>
>> Date : 2009-12-23 16:55 (19 days old)
>> References : http://marc.info/?l=linux-kernel&m=126158734326801&w=4
>>
>>
>>
>>
>
> With 2.6.33-rc3-git3 I now see 2 CPU's every on a normal boot, but its
> locking up solid at this part of the boot process as usual.
> ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
> HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low)
> -> IRQ 22.
> With acpi=noirq (2 CPU's)
> ================
> kvm: Nested Virtualization enabled.
> IT8716 Super IO detected
> Parport_PC 00:0a: reported by plug and Play ACPI
> Parport 0: PC-Style at 0x378, irq 7 [PCSPP, TRISTATE,EPP]
> parport: irq 7 in use, resorting to polled operation
> HDA Intel 0000:00:0e.1: PCI -> APIC IRQ transform: INT B -> IRQ 11
>
> With acpi=ht (1 CPU)
> =============
> Hangs at:-
> Loading drivees, configuring devices do_IRQ: 0.65 No irq handler for
> vector (irq -1)
>
> With acpi=off (2 CPU's)
> ========================
> Hangs at same point as with acpi=noirq.
>
> Regards
> Sid.


--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks



\
 
 \ /
  Last update: 2010-01-15 02:27    [W:0.128 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site