lkml.org 
[lkml]   [2009]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.{28,30} Keyboard not working on oldish machine
* Dmitry Torokhov (dmitry.torokhov@gmail.com) wrote:
> On Sun, Jun 28, 2009 at 03:04:52PM +0100, Dr. David Alan Gilbert wrote:
> > * Dmitry Torokhov (dmitry.torokhov@gmail.com) wrote:
> > > On Tuesday 23 June 2009 11:58:15 Dr. David Alan Gilbert wrote:
> >
> > <snip>
> >
> > > > Yep; I'm OK with the i8042.noaux from my point of view, but it's a
> > > > bit worrying that this used to work fine. There's obviously been
> > > > a change somewhere since 2.6.18 (and as I remember from the dmesg
> > > > the keyboard and aux ports are being initialised in different orders).
> > > > (Actually I say obviously since 2.6.18 - but the 2.6.18 I tried
> > > > I think I only used the debian version - I should go back and
> > > > see if I can do a vanilla one), but this box has been running
> > > > Linux since the time it was originally bought with loads of distros
> > > > and clean kernels years ago.
> > > >
> > > > While this machine is old, the motherboard was a pretty common one
> > > > at the time.
> > > >
> > >
> > > Any chance I could get dmesg with i8042.debug with 2.6.18? There was
> > > quite a large change back then when we got rid of the polling timer
> > > in i8042.
> >
> > Apologies for the delay; attached is the dmesg from the Debian 2.6.18
> > in which keyboard works as previously described.
> >
>
> Sorry for taking so long to respond. The only vidible difference beween
> the old and the new way is that we don't "close" serio ports anymore if
> we fail to detect a mouse/keyboard.
>
> Could you please try the patch below and tell me if it helps?

Yes that fixes it - thank you!
(Tested on 2.6.31-rc8, having first checked rc8 on it's own was still broken)

Dave

>
> Thanks!
> --
> Dmitry
>
> Input: i8042 - try disabling and re-enabling AUX port at close
>
> From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
>
> Ever since we switched from having a polling timer to registering IRQ
> handlers for both keyboard and AUX ports at the driver registration
> time, on certain boxes probing for a mouse results in keyboard
> stopping working. The only real difference between old and new way is
> that before we disabled ports after unsuccessful probe whereas now we
> leave them as is. Try to emulate the old behavior by disabling and
> immediately re-enabling AUX port when corresponding serio port is
> being closed.
>
> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
> ---
>
> drivers/input/serio/i8042.c | 28 ++++++++++++++++++++++++++++
> 1 files changed, 28 insertions(+), 0 deletions(-)
>
>
> diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
> index b53a015..a55ad99 100644
> --- a/drivers/input/serio/i8042.c
> +++ b/drivers/input/serio/i8042.c
> @@ -264,6 +264,33 @@ static int i8042_aux_write(struct serio *serio, unsigned char c)
> I8042_CMD_MUX_SEND + port->mux);
> }
>
> +
> +/*
> + * i8042_aux_close attempts to clear AUX port state by disabling
> + * and then re-enabling it.
> + */
> +
> +static void i8042_aux_close(struct serio *serio)
> +{
> + i8042_ctr &= ~I8042_CTR_AUXINT;
> + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
> + printk(KERN_WARNING
> + "i8042.c: Can't write CTR while closing AUX port.\n");
> + udelay(50);
> +
> + i8042_ctr &= ~I8042_CTR_AUXDIS;
> + i8042_ctr |= I8042_CTR_AUXINT;
> + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
> + printk(KERN_ERR
> + "i8042.c: Can't reactivate AUX port.\n");
> +
> + /*
> + * See if there is any data appeared while we were messing with
> + * port state.
> + */
> + i8042_interrupt(0, NULL);
> +}
> +
> /*
> * i8042_start() is called by serio core when port is about to finish
> * registering. It will mark port as existing so i8042_interrupt can
> @@ -1051,6 +1078,7 @@ static int __devinit i8042_create_aux_port(int idx)
> serio->write = i8042_aux_write;
> serio->start = i8042_start;
> serio->stop = i8042_stop;
> + serio->close = i8042_aux_close;
> serio->port_data = port;
> serio->dev.parent = &i8042_platform_device->dev;
> if (idx < 0) {
--
-----Open up your eyes, open up your mind, open up your code -------
/ Dr. David Alan Gilbert | Running GNU/Linux on Alpha,68K| Happy \
\ gro.gilbert @ treblig.org | MIPS,x86,ARM,SPARC,PPC & HPPA | In Hex /
\ _________________________|_____ http://www.treblig.org |_______/


\
 
 \ /
  Last update: 2009-09-06 01:15    [W:0.514 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site