Messages in this thread | | | Date | Tue, 29 Sep 2009 21:11:25 +0200 | From | Heinz Diehl <> | Subject | Re: 2.6.32-rc2: wlan rt73 dead |
| |
On 29.09.2009, Heinz Diehl wrote:
[....]
I investigated a little bit further, and that's what the logs say after activating the adapter by pushing/pulling:
[....] Sep 29 20:57:24 liesel kernel: usb 1-7: new high speed USB device using ehci_hcd and address 6 Sep 29 20:57:25 liesel kernel: usb 1-7: New USB device found, idVendor=07d1, idProduct=3c03 Sep 29 20:57:25 liesel kernel: usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Sep 29 20:57:25 liesel kernel: usb 1-7: Product: 802.11 bg WLAN Sep 29 20:57:25 liesel kernel: usb 1-7: Manufacturer: Ralink Sep 29 20:57:25 liesel kernel: usb 1-7: configuration #1 chosen from 1 choice Sep 29 20:57:25 liesel kernel: phy2 -> rt73usb_validate_eeprom: EEPROM recovery - NIC: 0xffef Sep 29 20:57:25 liesel kernel: phy2 -> rt73usb_validate_eeprom: EEPROM recovery - Led: 0xe000 Sep 29 20:57:25 liesel kernel: phy2 -> rt73usb_validate_eeprom: EEPROM recovery - RSSI OFFSET A: 0x0000 Sep 29 20:57:25 liesel kernel: phy2 -> rt2x00_set_chip: Info - Chipset detected - rt: 1300, rf: 0002, rev: 0002573a. Sep 29 20:57:25 liesel kernel: phy2: Selected rate control algorithm 'minstrel' Sep 29 20:57:25 liesel kernel: Registered led device: rt73usb-phy2::radio Sep 29 20:57:25 liesel kernel: Registered led device: rt73usb-phy2::assoc Sep 29 20:57:25 liesel kernel: Registered led device: rt73usb-phy2::quality Sep 29 20:57:25 liesel kernel: usbcore: registered new interface driver rt73usb Sep 29 20:57:25 liesel ifup: wlan0 Sep 29 20:57:25 liesel kernel: phy2 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'. Sep 29 20:57:25 liesel kernel: rt73usb 1-7:1.0: firmware: requesting rt73.bin Sep 29 20:57:25 liesel kernel: phy2 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7. Sep 29 20:57:25 liesel kernel: phy2 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102. Sep 29 20:57:25 liesel kernel: phy2 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188. Sep 29 20:57:25 liesel kernel: phy2 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0. Sep 29 20:57:25 liesel kernel: phy2 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0. Sep 29 20:57:25 liesel ifup-dhcp: Starting DHCP4 client on wlan0 Sep 29 20:57:25 liesel dhcpcd[8016]: wlan0: dhcpcd 3.2.3 starting Sep 29 20:57:25 liesel dhcpcd[8016]: wlan0: hardware address = 00:1c:f0:99:ee:e2 Sep 29 20:57:25 liesel dhcpcd[8016]: wlan0: broadcasting for a lease Sep 29 20:57:26 liesel ifup-dhcp: . Sep 29 20:57:28 liesel ifup-dhcp: . Sep 29 20:57:30 liesel ifup-dhcp: . Sep 29 20:57:32 liesel ifup-dhcp: . Sep 29 20:57:34 liesel ifup-dhcp: . Sep 29 20:57:37 liesel ifup-dhcp: . Sep 29 20:57:39 liesel ifup-dhcp: . Sep 29 20:57:41 liesel ifup-dhcp: . Sep 29 20:57:43 liesel ifup-dhcp: Sep 29 20:57:43 liesel ifup-dhcp: wlan0 DHCP4 continues in background Sep 29 20:57:45 liesel dhcpcd[8016]: wlan0: timed out Sep 29 20:57:45 liesel dhcpcd[8016]: wlan0: trying to use old lease in /var/lib/dhcpcd/dhcpcd-wlan0.info' Sep 29 20:57:45 liesel dhcpcd[8016]: wlan0: adding IP address 192.169.1.102/24 Sep 29 20:57:45 liesel dhcpcd[8016]: wlan0: adding default route via 192.169.1.1 metric 0 Sep 29 20:57:45 liesel avahi-daemon[5342]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.169.1.102. Sep 29 20:57:45 liesel avahi-daemon[5342]: New relevant interface wlan0.IPv4 for mDNS. Sep 29 20:57:45 liesel avahi-daemon[5342]: Registering new address record for 192.169.1.102 on wlan0.IPv4. Sep 29 20:57:46 liesel syslog-ng[3374]: Configuration reload request received, reloading configuration; Sep 29 20:57:46 liesel syslog-ng[3374]: New configuration initialized; [....]
And that's it. Tha adapter is "off", and no connection is possible. It's strongly 2.6.32-rc2 related, no problems with any other kernel before.
| |