lkml.org 
[lkml]   [2009]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] asus_atk0110: add support for Asus P7P55D
From
On Mon, Sep 28, 2009 at 7:17 AM, Luca Tettamanti <kronos.it@gmail.com> wrote:
> On Wed, Sep 23, 2009 at 09:18:45PM -0600, Robert Hancock wrote:
>> On Wed, Sep 23, 2009 at 1:12 PM, Luca Tettamanti <kronos.it@gmail.com> wrote:
>> > With P7P55D (and newer) boards Asus extended the output buffer (ASBF)
>> > making the driver unable to read the data from the sensors.
>> > Change the driver to use dynamic buffers (allocated by ACPI core); the
>> > return value is cached, so the number of memory allocations is very low.
>> >
>> > Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
>> > Tested-by: Robert Hancock <hancockrwd@gmail.com>
>>
>> I just noticed a problem (either with this patch or some other issue
>> with the driver on this board): The readings don't seem to be
>> updating, I get the same values all the time. (Just now I started
>> compiling a kernel and coretemp reports temperatures in the 60 degree
>> plus range but atk0110-acpi still reports 35 degrees as it did
>> before..)
>
> Hi Robert,
> I have a new patch for you :)
> It contains the previous changes to handle the bigger ASBF buffer plus a new
> method to enable the EC as suggested by Asus. Be sure to compile with
> HWMON_DEBUG_CHIP enabled.

Excellent.. seems to work now and give actually updating sensor readings :-)

By the way, if you have any firmware-type contacts at Asus that know
about these boards, you might want to point them at this problem, the
BIOS DMAR tables point to invalid locations when Intel VT-d is
enabled. So far haven't gotten any useful response from tech support..

http://www.gossamer-threads.com/lists/linux/kernel/1131574


\
 
 \ /
  Last update: 2009-09-29 04:23    [W:0.106 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site