lkml.org 
[lkml]   [2009]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: sky2 rx length errors
On Sun, Sep 20, 2009 at 08:46:59PM +0200, Grozdan wrote:
(...)
> Thanks Willy :)
>
> What I'm still wondering a bit though is the fact that I've never seen
> it behave like that for the past 3 years I've been using it. Only
> recently, with upgrading my kernel to 2.6.30 and later on to 2.6.31
> (self-compiled, sources taken from the openSUSE build service) it
> started to behave like that. In the past I also used older kernels (of
> course) like 2.6.27.x and 2.6.29 and never encountered this. So I'm a
> bit uncertain as to whether it's actually something in the kernel that
> makes it behave like that or that there's a HW problem that suddenly
> occurred or got exposed...

Unless you changed the switch port it is connected to, I agree this
sounds strange. I have also wondered if those issues could be caused
by temperature rising on the chip. I don't know if any recent change
could cause such environmental differences to occur :-/

Regards,
Willy



\
 
 \ /
  Last update: 2009-09-20 20:57    [W:0.031 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site