lkml.org 
[lkml]   [2009]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.31-rc5 regression: hd don't show up
On 09/02/2009 04:22 AM, Tejun Heo wrote:
> Tim Blechmann wrote:
>>>> booting the machine today, one hd is missing again ... bootlog attached
>>> Hmmm... strange. I don't really see how it could be escaping. Can
>>> you please apply the attached patch? It still won't change the
>>> behavior but should be able to catch where it's escaping.
>>
>> attached you find two bootlogs, for a correct boot, and with one hd
>> missing ...
>
> Heh heh, this is getting a bit embarrassing. Seems like I wasn't
> looking at the right path. Can you please try this one too? If it
> says "XXX D7 pulldown quick exit path" and then succeed to probe,
> that's the previous failure case so you don't need to keep trying to
> reproduce the problem.

i've attached the two boot logs again ...

tim

--
tim@klingt.org
http://tim.klingt.org

Music is the can opener of the soul. It makes you terribly quiet
inside, makes you aware that there's a roof to your being.
Henry Miller
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-rc8 (tim@moka) (gcc version 4.4.1 (Ubuntu 4.4.1-1ubuntu1~jaunty1) ) #20 SMP PREEMPT Wed Sep 2 10:55:50 CEST 2009
[ 0.000000] Command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf680000 (usable)
[ 0.000000] BIOS-e820: 00000000bf680000 - 00000000bf698000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E3FFF write-protect
[ 0.000000] E4000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF700000 mask FFFF00000 uncachable
[ 0.000000] 5 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf680 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4c00 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf680000 (usable)
[ 0.000000] modified: 00000000bf680000 - 00000000bf698000 (ACPI data)
[ 0.000000] modified: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS)
[ 0.000000] modified: 00000000bf6dc000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf680000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf680000 page 4k
[ 0.000000] kernel direct mapping tables up to bf680000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] 0100000000 - 0340000000 page 2M
[ 0.000000] kernel direct mapping tables up to 340000000 @ 13000-21000
[ 0.000000] RAMDISK: 3783b000 - 37fef78c
[ 0.000000] ACPI: RSDP 00000000000fabd0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf680100 0005C (v01 022609 XSDT1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf680290 000F4 (v03 022609 FACP1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf6804b0 0C3DD (v01 A1146 A1146001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf698000 00040
[ 0.000000] ACPI: APIC 00000000bf680390 000D8 (v01 022609 APIC1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf680470 0003C (v01 022609 OEMMCFG 20090226 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf698040 00072 (v01 022609 OEMB1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf68f4b0 00038 (v01 022609 OEMHPET 20090226 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf68f4f0 000B0 (v01 022609 OEMOSFR 20090226 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf69a8f0 0249F (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0340000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0002171520] TEXT DATA BSS ==> [0001000000 - 0002171520]
[ 0.000000] #3 [003783b000 - 0037fef78c] RAMDISK ==> [003783b000 - 0037fef78c]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0002172000 - 0002172288] BRK ==> [0002172000 - 0002172288]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #7 [0000013000 - 000001c000] PGTABLE ==> [0000013000 - 000001c000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff880028600000-ffff8800377fffff] on node 0
[ 0.000000] [ffffea0010800000-ffffea0011dfffff] PMD -> [ffff880038000000-ffff8800395fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf680
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] On node 0 totalpages: 3143183
[ 0.000000] DMA zone: 88 pages used for memmap
[ 0.000000] DMA zone: 111 pages reserved
[ 0.000000] DMA zone: 3784 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 22440 pages used for memmap
[ 0.000000] DMA32 zone: 757464 pages, LIFO batch:31
[ 0.000000] Normal zone: 50688 pages used for memmap
[ 0.000000] Normal zone: 2308608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 8
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
[ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf680000 - 00000000bf698000
[ 0.000000] PM: Registered nosave memory: 00000000bf698000 - 00000000bf6dc000
[ 0.000000] PM: Registered nosave memory: 00000000bf6dc000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages at ffff880028084000, static data 87684 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3069856
[ 0.000000] Kernel command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 12183548k/13631488k available (5212k kernel code, 1058756k absent, 388196k reserved, 2998k data, 516k init)
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] NR_IRQS:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2672.423 MHz processor.
[ 0.001522] Console: colour VGA+ 80x25
[ 0.001534] console [tty0] enabled
[ 0.001558] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.001560] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.001561] ... MAX_LOCK_DEPTH: 48
[ 0.001562] ... MAX_LOCKDEP_KEYS: 8191
[ 0.001563] ... CLASSHASH_SIZE: 4096
[ 0.001564] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.001566] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.001567] ... CHAINHASH_SIZE: 16384
[ 0.001568] memory used by lock dependency info: 5695 kB
[ 0.001569] per task-struct memory footprint: 1920 bytes
[ 0.019772] allocated 125829120 bytes of page_cgroup
[ 0.019775] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.019977] hpet clockevent registered
[ 0.019980] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.019992] Calibrating delay loop (skipped), value calculated using timer frequency.. 5344.84 BogoMIPS (lpj=2672423)
[ 0.020112] Security Framework initialized
[ 0.020116] SELinux: Disabled at boot.
[ 0.020167] Mount-cache hash table entries: 256
[ 0.021088] Initializing cgroup subsys ns
[ 0.021090] Initializing cgroup subsys cpuacct
[ 0.021096] Initializing cgroup subsys memory
[ 0.021130] Initializing cgroup subsys freezer
[ 0.021148] CPU: Physical Processor ID: 0
[ 0.021149] CPU: Processor Core ID: 0
[ 0.021152] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.021154] CPU: L2 cache: 256K
[ 0.021155] CPU: L3 cache: 8192K
[ 0.021157] using mwait in idle threads.
[ 0.021159] Performance Counters: Nehalem/Corei7 events, Intel PMU driver.
[ 0.021168] ... version: 3
[ 0.021169] ... bit width: 48
[ 0.021170] ... generic counters: 4
[ 0.021171] ... value mask: 0000ffffffffffff
[ 0.021173] ... max period: 000000007fffffff
[ 0.021174] ... fixed-purpose counters: 3
[ 0.021175] ... counter mask: 000000070000000f
[ 0.022003] ACPI: Core revision 20090521
[ 0.060482] Setting APIC routing to flat
[ 0.060964] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070968] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.177033] lockdep: fixing up alternatives.
[ 0.177156] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.187416] Initializing CPU#1
[ 0.248640] Calibrating delay using timer specific routine.. 5397.79 BogoMIPS (lpj=2698896)
[ 0.248646] CPU: Physical Processor ID: 0
[ 0.248647] CPU: Processor Core ID: 1
[ 0.248649] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.248650] CPU: L2 cache: 256K
[ 0.248651] CPU: L3 cache: 8192K
[ 0.249080] CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.249087] Skipping synchronization checks as TSC is reliable.
[ 0.249672] lockdep: fixing up alternatives.
[ 0.249697] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.259957] Initializing CPU#2
[ 0.320314] Calibrating delay using timer specific routine.. 5397.79 BogoMIPS (lpj=2698899)
[ 0.320321] CPU: Physical Processor ID: 0
[ 0.320322] CPU: Processor Core ID: 2
[ 0.320323] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.320325] CPU: L2 cache: 256K
[ 0.320326] CPU: L3 cache: 8192K
[ 0.320818] CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.320825] Skipping synchronization checks as TSC is reliable.
[ 0.321344] lockdep: fixing up alternatives.
[ 0.321374] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.331632] Initializing CPU#3
[ 0.393000] Calibrating delay using timer specific routine.. 5576.15 BogoMIPS (lpj=2788077)
[ 0.393008] CPU: Physical Processor ID: 0
[ 0.393009] CPU: Processor Core ID: 3
[ 0.393011] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.393012] CPU: L2 cache: 256K
[ 0.393013] CPU: L3 cache: 8192K
[ 0.393447] CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.393455] Skipping synchronization checks as TSC is reliable.
[ 0.394028] lockdep: fixing up alternatives.
[ 0.394055] Booting processor 4 APIC 0x1 ip 0x6000
[ 0.404316] Initializing CPU#4
[ 0.464673] Calibrating delay using timer specific routine.. 5397.79 BogoMIPS (lpj=2698898)
[ 0.464681] CPU: Physical Processor ID: 0
[ 0.464683] CPU: Processor Core ID: 0
[ 0.464685] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.464688] CPU: L2 cache: 256K
[ 0.464689] CPU: L3 cache: 8192K
[ 0.465203] CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.465211] Skipping synchronization checks as TSC is reliable.
[ 0.465704] lockdep: fixing up alternatives.
[ 0.465732] Booting processor 5 APIC 0x3 ip 0x6000
[ 0.475990] Initializing CPU#5
[ 0.536348] Calibrating delay using timer specific routine.. 5397.79 BogoMIPS (lpj=2698898)
[ 0.536354] CPU: Physical Processor ID: 0
[ 0.536355] CPU: Processor Core ID: 1
[ 0.536357] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.536358] CPU: L2 cache: 256K
[ 0.536359] CPU: L3 cache: 8192K
[ 0.536852] CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.536861] Skipping synchronization checks as TSC is reliable.
[ 0.537378] lockdep: fixing up alternatives.
[ 0.537406] Booting processor 6 APIC 0x5 ip 0x6000
[ 0.547665] Initializing CPU#6
[ 0.608022] Calibrating delay using timer specific routine.. 5397.79 BogoMIPS (lpj=2698899)
[ 0.608028] CPU: Physical Processor ID: 0
[ 0.608029] CPU: Processor Core ID: 2
[ 0.608031] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.608033] CPU: L2 cache: 256K
[ 0.608034] CPU: L3 cache: 8192K
[ 0.608526] CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.608535] Skipping synchronization checks as TSC is reliable.
[ 0.609052] lockdep: fixing up alternatives.
[ 0.609080] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.618606] Initializing CPU#7
[ 0.680707] Calibrating delay using timer specific routine.. 5505.75 BogoMIPS (lpj=2752876)
[ 0.680715] CPU: Physical Processor ID: 0
[ 0.680716] CPU: Processor Core ID: 3
[ 0.680718] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.680720] CPU: L2 cache: 256K
[ 0.680721] CPU: L3 cache: 8192K
[ 0.681273] CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.681281] Skipping synchronization checks as TSC is reliable.
[ 0.681301] Brought up 8 CPUs
[ 0.681303] Total of 8 processors activated (43415.73 BogoMIPS).
[ 0.681412] CPU0 attaching sched-domain:
[ 0.681415] domain 0: span 0,4 level SIBLING
[ 0.681416] groups: 0 4
[ 0.681420] domain 1: span 0-7 level MC
[ 0.681422] groups: 0,4 1,5 2,6 3,7
[ 0.681439] CPU1 attaching sched-domain:
[ 0.681441] domain 0: span 1,5 level SIBLING
[ 0.681443] groups: 1 5
[ 0.681446] domain 1: span 0-7 level MC
[ 0.681447] groups: 1,5 2,6 3,7 0,4
[ 0.681453] CPU2 attaching sched-domain:
[ 0.681455] domain 0: span 2,6 level SIBLING
[ 0.681456] groups: 2 6
[ 0.681459] domain 1: span 0-7 level MC
[ 0.681461] groups: 2,6 3,7 0,4 1,5
[ 0.681467] CPU3 attaching sched-domain:
[ 0.681468] domain 0: span 3,7 level SIBLING
[ 0.681470] groups: 3 7
[ 0.681473] domain 1: span 0-7 level MC
[ 0.681474] groups: 3,7 0,4 1,5 2,6
[ 0.681480] CPU4 attaching sched-domain:
[ 0.681481] domain 0: span 0,4 level SIBLING
[ 0.681483] groups: 4 0
[ 0.681486] domain 1: span 0-7 level MC
[ 0.681488] groups: 0,4 1,5 2,6 3,7
[ 0.681493] CPU5 attaching sched-domain:
[ 0.681495] domain 0: span 1,5 level SIBLING
[ 0.681496] groups: 5 1
[ 0.681499] domain 1: span 0-7 level MC
[ 0.681501] groups: 1,5 2,6 3,7 0,4
[ 0.681507] CPU6 attaching sched-domain:
[ 0.681508] domain 0: span 2,6 level SIBLING
[ 0.681510] groups: 6 2
[ 0.681513] domain 1: span 0-7 level MC
[ 0.681514] groups: 2,6 3,7 0,4 1,5
[ 0.681520] CPU7 attaching sched-domain:
[ 0.681522] domain 0: span 3,7 level SIBLING
[ 0.681523] groups: 7 3
[ 0.681526] domain 1: span 0-7 level MC
[ 0.681528] groups: 3,7 0,4 1,5 2,6
[ 0.682275] Booting paravirtualized kernel on bare hardware
[ 0.682531] regulator: core version 0.5
[ 0.682557] Time: 9:09:59 Date: 09/02/09
[ 0.682743] NET: Registered protocol family 16
[ 0.683166] ACPI: bus type pci registered
[ 0.683274] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.683277] PCI: Not using MMCONFIG.
[ 0.683278] PCI: Using configuration type 1 for base access
[ 0.684889] bio: create slab <bio-0> at 0
[ 0.687562] ACPI: EC: Look up EC in DSDT
[ 0.726523] ACPI: Interpreter enabled
[ 0.726527] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.726574] ACPI: Using IOAPIC for interrupt routing
[ 0.726641] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.729411] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.730925] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.743104] ACPI Warning: Incorrect checksum in table [OEMB] - 8B, should be 83 20090521 tbutils-246
[ 0.743363] ACPI: No dock devices found.
[ 0.743520] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.743741] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.743745] pci 0000:00:00.0: PME# disabled
[ 0.743818] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.743821] pci 0000:00:01.0: PME# disabled
[ 0.743893] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.743896] pci 0000:00:03.0: PME# disabled
[ 0.743970] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.743973] pci 0000:00:07.0: PME# disabled
[ 0.744389] pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f]
[ 0.744468] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f]
[ 0.744547] pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f]
[ 0.744631] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7fff000-0xf7fff3ff]
[ 0.744692] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.744696] pci 0000:00:1a.7: PME# disabled
[ 0.744744] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7ff8000-0xf7ffbfff]
[ 0.744791] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.744795] pci 0000:00:1b.0: PME# disabled
[ 0.744863] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.744866] pci 0000:00:1c.0: PME# disabled
[ 0.744938] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.744942] pci 0000:00:1c.2: PME# disabled
[ 0.745008] pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f]
[ 0.745088] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
[ 0.745167] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f]
[ 0.745252] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7ffe000-0xf7ffe3ff]
[ 0.745314] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.745320] pci 0000:00:1d.7: PME# disabled
[ 0.745456] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.745460] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.745463] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.745468] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[ 0.745528] pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007]
[ 0.745534] pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03]
[ 0.745540] pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887]
[ 0.745546] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803]
[ 0.745552] pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f]
[ 0.745557] pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f]
[ 0.745611] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7ffd000-0xf7ffd0ff]
[ 0.745626] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.745677] pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007]
[ 0.745683] pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03]
[ 0.745688] pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887]
[ 0.745694] pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803]
[ 0.745700] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f]
[ 0.745706] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f]
[ 0.745831] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.745841] pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.745851] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.745857] pci 0000:02:00.0: reg 24 io port: [0xcc00-0xcc7f]
[ 0.745862] pci 0000:02:00.0: reg 30 32bit mmio: [0xfb480000-0xfb4fffff]
[ 0.745939] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff]
[ 0.745943] pci 0000:00:03.0: bridge 32bit mmio: [0xf8000000-0xfb4fffff]
[ 0.745949] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.746066] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf4f00000-0xf4ffffff]
[ 0.746117] pci 0000:04:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.746139] pci 0000:04:00.0: reg 18 64bit mmio: [0xfb5ff000-0xfb5fffff]
[ 0.746154] pci 0000:04:00.0: reg 20 64bit mmio: [0xf4ef0000-0xf4efffff]
[ 0.746162] pci 0000:04:00.0: reg 30 32bit mmio: [0xfb5c0000-0xfb5dffff]
[ 0.746206] pci 0000:04:00.0: supports D1 D2
[ 0.746207] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.746212] pci 0000:04:00.0: PME# disabled
[ 0.746286] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
[ 0.746290] pci 0000:00:1c.2: bridge 32bit mmio: [0xfb500000-0xfb5fffff]
[ 0.746296] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4e00000-0xf4efffff]
[ 0.746339] pci 0000:06:00.0: reg 10 32bit mmio: [0xfb6f8000-0xfb6fffff]
[ 0.746429] pci 0000:06:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.746450] pci 0000:06:01.0: supports D1 D2
[ 0.746452] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.746456] pci 0000:06:01.0: PME# disabled
[ 0.746519] pci 0000:00:1e.0: transparent bridge
[ 0.746523] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.746527] pci 0000:00:1e.0: bridge 32bit mmio: [0xfb600000-0xfbefffff]
[ 0.746533] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf5000000-0xf6ffffff]
[ 0.746581] pci_bus 0000:00: on NUMA node 0
[ 0.746587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.747019] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.747170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.747242] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.747325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 0.747395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 0.747461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 0.779938] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.780074] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.780208] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.780341] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.780474] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.780622] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.780758] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.780891] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 0.781215] SCSI subsystem initialized
[ 0.781408] libata version 3.00 loaded.
[ 0.781507] usbcore: registered new interface driver usbfs
[ 0.781529] usbcore: registered new interface driver hub
[ 0.781559] usbcore: registered new device driver usb
[ 0.781745] ACPI: WMI: Mapper loaded
[ 0.781747] PCI: Using ACPI for IRQ routing
[ 0.791292] Bluetooth: Core ver 2.15
[ 0.791327] NET: Registered protocol family 31
[ 0.791329] Bluetooth: HCI device and connection manager initialized
[ 0.791348] Bluetooth: HCI socket layer initialized
[ 0.791350] NET: Registered protocol family 8
[ 0.791351] NET: Registered protocol family 20
[ 0.791368] NetLabel: Initializing
[ 0.791370] NetLabel: domain hash size = 128
[ 0.791371] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.791411] NetLabel: unlabeled traffic allowed by default
[ 0.791665] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.791670] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.799881] Switched to high resolution mode on CPU 0
[ 0.800274] Switched to high resolution mode on CPU 2
[ 0.800276] Switched to high resolution mode on CPU 3
[ 0.800285] Switched to high resolution mode on CPU 1
[ 0.800339] Switched to high resolution mode on CPU 5
[ 0.800341] Switched to high resolution mode on CPU 6
[ 0.800344] Switched to high resolution mode on CPU 7
[ 0.800350] Switched to high resolution mode on CPU 4
[ 0.814115] pnp: PnP ACPI init
[ 0.814146] ACPI: bus type pnp registered
[ 0.817770] pnp: PnP ACPI: found 15 devices
[ 0.817772] ACPI: ACPI bus type pnp unregistered
[ 0.817785] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
[ 0.817788] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[ 0.817790] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[ 0.817792] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[ 0.817795] system 00:01: iomem range 0xfec8a000-0xfec8afff could not be reserved
[ 0.817797] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
[ 0.817806] system 00:07: ioport range 0x290-0x29f has been reserved
[ 0.817814] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.817816] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.817818] system 00:08: ioport range 0x500-0x57f could not be reserved
[ 0.817821] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.817823] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.817826] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 0.817833] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
[ 0.817840] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.817843] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.817852] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.817862] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.817865] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.817867] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.817870] system 00:0e: iomem range 0x100000-0xbfefffff could not be reserved
[ 0.817872] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved
[ 0.822731] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.822733] pci 0000:00:01.0: IO window: disabled
[ 0.822738] pci 0000:00:01.0: MEM window: disabled
[ 0.822741] pci 0000:00:01.0: PREFETCH window: disabled
[ 0.822744] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 0.822747] pci 0000:00:03.0: IO window: 0xc000-0xcfff
[ 0.822751] pci 0000:00:03.0: MEM window: 0xf8000000-0xfb4fffff
[ 0.822755] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.822761] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 0.822762] pci 0000:00:07.0: IO window: disabled
[ 0.822766] pci 0000:00:07.0: MEM window: disabled
[ 0.822769] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.822773] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[ 0.822774] pci 0000:00:1c.0: IO window: disabled
[ 0.822779] pci 0000:00:1c.0: MEM window: disabled
[ 0.822782] pci 0000:00:1c.0: PREFETCH window: 0x000000f4f00000-0x000000f4ffffff
[ 0.822788] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.822791] pci 0000:00:1c.2: IO window: 0xd000-0xdfff
[ 0.822796] pci 0000:00:1c.2: MEM window: 0xfb500000-0xfb5fffff
[ 0.822799] pci 0000:00:1c.2: PREFETCH window: 0x000000f4e00000-0x000000f4efffff
[ 0.822813] pci 0000:06:01.0: CardBus bridge, secondary bus 0000:07
[ 0.822814] pci 0000:06:01.0: IO window: 0x00e000-0x00e0ff
[ 0.822819] pci 0000:06:01.0: IO window: 0x00e400-0x00e4ff
[ 0.822823] pci 0000:06:01.0: PREFETCH window: 0xc0000000-0xc3ffffff
[ 0.822827] pci 0000:06:01.0: MEM window: 0xc4000000-0xc7ffffff
[ 0.822832] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.822834] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.822839] pci 0000:00:1e.0: MEM window: 0xfb600000-0xfbefffff
[ 0.822843] pci 0000:00:1e.0: PREFETCH window: 0x000000f5000000-0x000000f6ffffff
[ 0.822858] pci 0000:00:01.0: setting latency timer to 64
[ 0.822866] pci 0000:00:03.0: setting latency timer to 64
[ 0.822873] pci 0000:00:07.0: setting latency timer to 64
[ 0.822884] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.822888] pci 0000:00:1c.0: setting latency timer to 64
[ 0.822897] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.822901] pci 0000:00:1c.2: setting latency timer to 64
[ 0.822907] pci 0000:00:1e.0: setting latency timer to 64
[ 0.822914] pci 0000:06:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.822920] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.822922] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.822924] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.822925] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfb4fffff]
[ 0.822927] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.822929] pci_bus 0000:05: resource 2 pref mem [0xf4f00000-0xf4ffffff]
[ 0.822931] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.822933] pci_bus 0000:04: resource 1 mem: [0xfb500000-0xfb5fffff]
[ 0.822935] pci_bus 0000:04: resource 2 pref mem [0xf4e00000-0xf4efffff]
[ 0.822936] pci_bus 0000:06: resource 0 io: [0xe000-0xefff]
[ 0.822938] pci_bus 0000:06: resource 1 mem: [0xfb600000-0xfbefffff]
[ 0.822940] pci_bus 0000:06: resource 2 pref mem [0xf5000000-0xf6ffffff]
[ 0.822942] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.822943] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.822945] pci_bus 0000:07: resource 0 io: [0xe000-0xe0ff]
[ 0.822947] pci_bus 0000:07: resource 1 io: [0xe400-0xe4ff]
[ 0.822948] pci_bus 0000:07: resource 2 pref mem [0xc0000000-0xc3ffffff]
[ 0.822950] pci_bus 0000:07: resource 3 mem: [0xc4000000-0xc7ffffff]
[ 0.823072] NET: Registered protocol family 2
[ 0.823295] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.824354] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.824975] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 0.828985] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.829007] TCP reno registered
[ 0.829228] NET: Registered protocol family 1
[ 0.829428] Trying to unpack rootfs image as initramfs...
[ 0.971327] Freeing initrd memory: 7889k freed
[ 0.973217] Scanning for low memory corruption every 60 seconds
[ 0.973460] audit: initializing netlink socket (disabled)
[ 0.973495] type=2000 audit(1251882598.810:1): initialized
[ 0.977419] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.977812] VFS: Disk quotas dquot_6.5.2
[ 0.977878] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.978818] fuse init (API version 7.12)
[ 0.978885] msgmni has been set to 23813
[ 0.979472] alg: No test for stdrng (krng)
[ 0.979518] io scheduler noop registered
[ 0.979520] io scheduler anticipatory registered
[ 0.979522] io scheduler deadline registered
[ 0.979562] io scheduler cfq registered (default)
[ 0.979719] pci 0000:02:00.0: Boot video device
[ 0.979933] pcieport-driver 0000:00:01.0: irq 48 for MSI/MSI-X
[ 0.979941] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.980087] pcieport-driver 0000:00:03.0: irq 49 for MSI/MSI-X
[ 0.980094] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 0.980231] pcieport-driver 0000:00:07.0: irq 50 for MSI/MSI-X
[ 0.980239] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 0.980371] pcieport-driver 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 0.980379] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.980523] pcieport-driver 0000:00:1c.2: irq 52 for MSI/MSI-X
[ 0.980531] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.980640] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.980659] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.980668] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.980681] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.980822] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.981067] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.981071] ACPI: Power Button [PWRF]
[ 0.981152] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.981155] ACPI: Power Button [PWRB]
[ 0.982215] ACPI: SSDT 00000000bf6980c0 00403 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.983070] ACPI: SSDT 00000000bf69a140 003B2 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.985989] Monitor-Mwait will be used to enter C-1 state
[ 0.986044] Monitor-Mwait will be used to enter C-2 state
[ 0.986075] Monitor-Mwait will be used to enter C-3 state
[ 0.986214] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.986345] processor LNXCPU:00: registered as cooling_device0
[ 0.986892] ACPI: SSDT 00000000bf6984d0 00403 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.987689] ACPI: SSDT 00000000bf69a500 00085 (v01 PmRef P002Cst 00003000 INTL 20060113)
[ 0.990640] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.990674] processor LNXCPU:01: registered as cooling_device1
[ 0.991226] ACPI: SSDT 00000000bf6988e0 00403 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.992027] ACPI: SSDT 00000000bf69a590 00085 (v01 PmRef P003Cst 00003000 INTL 20060113)
[ 0.994974] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
[ 0.995013] processor LNXCPU:02: registered as cooling_device2
[ 0.995557] ACPI: SSDT 00000000bf698cf0 00403 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.996363] ACPI: SSDT 00000000bf69a620 00085 (v01 PmRef P004Cst 00003000 INTL 20060113)
[ 0.999320] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
[ 0.999361] processor LNXCPU:03: registered as cooling_device3
[ 0.999911] ACPI: SSDT 00000000bf699100 00403 (v01 DpgPmm P005Ist 00000012 INTL 20060113)
[ 1.000715] ACPI: SSDT 00000000bf69a6b0 00085 (v01 PmRef P005Cst 00003000 INTL 20060113)
[ 1.003680] ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3])
[ 1.003715] processor LNXCPU:04: registered as cooling_device4
[ 1.004268] ACPI: SSDT 00000000bf699510 00403 (v01 DpgPmm P006Ist 00000012 INTL 20060113)
[ 1.005084] ACPI: SSDT 00000000bf69a740 00085 (v01 PmRef P006Cst 00003000 INTL 20060113)
[ 1.008033] ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3])
[ 1.008067] processor LNXCPU:05: registered as cooling_device5
[ 1.008613] ACPI: SSDT 00000000bf699920 00403 (v01 DpgPmm P007Ist 00000012 INTL 20060113)
[ 1.009426] ACPI: SSDT 00000000bf69a7d0 00085 (v01 PmRef P007Cst 00003000 INTL 20060113)
[ 1.012379] ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3])
[ 1.012418] processor LNXCPU:06: registered as cooling_device6
[ 1.012970] ACPI: SSDT 00000000bf699d30 00403 (v01 DpgPmm P008Ist 00000012 INTL 20060113)
[ 1.013792] ACPI: SSDT 00000000bf69a860 00085 (v01 PmRef P008Cst 00003000 INTL 20060113)
[ 1.016741] ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3])
[ 1.016780] processor LNXCPU:07: registered as cooling_device7
[ 1.019961] XENFS: not registering filesystem on non-xen platform
[ 1.021677] Linux agpgart interface v0.103
[ 1.021682] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.023714] brd: module loaded
[ 1.024419] loop: module loaded
[ 1.024510] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.024694] ata_piix 0000:00:1f.2: version 2.13
[ 1.024711] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.024716] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.024768] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.024847] scsi0 : ata_piix
[ 1.025148] scsi1 : ata_piix
[ 1.026962] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 20
[ 1.026966] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 20
[ 1.026990] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.026995] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.027040] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.027054] ata1.00: hard resetting link
[ 1.027092] scsi2 : ata_piix
[ 1.027097] ata2.00: hard resetting link
[ 1.027164] scsi3 : ata_piix
[ 1.028070] ata1.00: XXX bringing up link
[ 1.028921] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 20
[ 1.028924] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 20
[ 1.029069] ata2.00: XXX bringing up link
[ 1.030023] Fixed MDIO Bus: probed
[ 1.030027] PPP generic driver version 2.4.2
[ 1.030247] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.030270] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.030282] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.030285] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.031085] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.035005] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.035011] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.035026] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
[ 1.039011] ata3: hard resetting link
[ 1.039025] ata4: hard resetting link
[ 1.040767] ata3: XXX bringing up link
[ 1.041067] ata4: XXX bringing up link
[ 1.043820] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.044259] usb usb1: configuration #1 chosen from 1 choice
[ 1.044451] hub 1-0:1.0: USB hub found
[ 1.044477] hub 1-0:1.0: 6 ports detected
[ 1.044787] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.044797] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.044800] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.044917] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.048822] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.048827] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.048842] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
[ 1.057795] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.057920] usb usb2: configuration #1 chosen from 1 choice
[ 1.057956] hub 2-0:1.0: USB hub found
[ 1.057963] hub 2-0:1.0: 6 ports detected
[ 1.058070] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.058095] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.058134] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.058140] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.058143] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.058200] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.058233] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 1.058352] usb usb3: configuration #1 chosen from 1 choice
[ 1.058389] hub 3-0:1.0: USB hub found
[ 1.058433] hub 3-0:1.0: 2 ports detected
[ 1.058533] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.058539] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.058541] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.058594] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.058627] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 1.058731] usb usb4: configuration #1 chosen from 1 choice
[ 1.058778] hub 4-0:1.0: USB hub found
[ 1.058784] hub 4-0:1.0: 2 ports detected
[ 1.058866] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.058872] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.058875] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.058927] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.058960] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
[ 1.059069] usb usb5: configuration #1 chosen from 1 choice
[ 1.059105] hub 5-0:1.0: USB hub found
[ 1.059111] hub 5-0:1.0: 2 ports detected
[ 1.059190] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.059196] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.059199] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.059252] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.059276] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 1.059378] usb usb6: configuration #1 chosen from 1 choice
[ 1.059413] hub 6-0:1.0: USB hub found
[ 1.059420] hub 6-0:1.0: 2 ports detected
[ 1.059494] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.059500] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.059502] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.059556] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.059579] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 1.059704] usb usb7: configuration #1 chosen from 1 choice
[ 1.059743] hub 7-0:1.0: USB hub found
[ 1.059776] hub 7-0:1.0: 2 ports detected
[ 1.059853] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.059859] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.059862] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.059914] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.059939] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 1.060048] usb usb8: configuration #1 chosen from 1 choice
[ 1.060086] hub 8-0:1.0: USB hub found
[ 1.060092] hub 8-0:1.0: 2 ports detected
[ 1.060235] PNP: No PS/2 controller found. Probing ports directly.
[ 1.062989] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.063018] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.063400] mice: PS/2 mouse device common for all mice
[ 1.063521] rtc_cmos 00:03: RTC can wake from S4
[ 1.063729] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.063756] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.063895] device-mapper: uevent: version 1.0.3
[ 1.064003] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.064205] device-mapper: multipath: version 1.1.0 loaded
[ 1.064234] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.065085] cpuidle: using governor ladder
[ 1.065791] cpuidle: using governor menu
[ 1.066449] TCP cubic registered
[ 1.066793] NET: Registered protocol family 10
[ 1.067930] lo: Disabled Privacy Extensions
[ 1.068563] NET: Registered protocol family 17
[ 1.068627] Bluetooth: L2CAP ver 2.13
[ 1.068628] Bluetooth: L2CAP socket layer initialized
[ 1.068631] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.068633] Bluetooth: SCO socket layer initialized
[ 1.068810] Bluetooth: RFCOMM TTY layer initialized
[ 1.068813] Bluetooth: RFCOMM socket layer initialized
[ 1.068815] Bluetooth: RFCOMM ver 1.11
[ 1.076876] PM: Resume from disk failed.
[ 1.076893] registered taskstats version 1
[ 1.077085] Magic number: 9:735:170
[ 1.077166] acpi device:33: hash matches
[ 1.077280] rtc_cmos 00:03: setting system clock to 2009-09-02 09:10:00 UTC (1251882600)
[ 1.077283] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.077284] EDD information not available.
[ 1.330759] ata1.00: XXX debounced rc=0
[ 1.330767] ata1.00: XXX setting online
[ 1.330770] ata1.00: XXX link_hardreset online=1 returning 0
[ 1.330773] ata1.01: hard resetting link
[ 1.332068] ata2.00: XXX debounced rc=0
[ 1.332075] ata2.00: XXX setting online
[ 1.332078] ata2.00: XXX link_hardreset online=1 returning 0
[ 1.332081] ata2.01: hard resetting link
[ 1.333069] ata1.01: XXX bringing up link
[ 1.334069] ata2.01: XXX bringing up link
[ 1.343750] ata3: XXX debounced rc=0
[ 1.343755] ata4: XXX debounced rc=0
[ 1.343758] ata3: XXX setting online
[ 1.343760] ata3: XXX link_hardreset online=1 returning 0
[ 1.343767] ata4: XXX setting online
[ 1.343770] ata4: XXX link_hardreset online=1 returning 0
[ 1.343792] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.343795] ata4: about to softreset, devmask=1
[ 1.343803] ata3: EH complete
[ 1.494699] ata4.00: XXX CLASSIFY TF 50/01:01:00:00
[ 1.494703] ata4.00: XXX ata_dev_classify=1
[ 1.494733] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.514228] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 1.514233] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.518099] ata4.00: configured for UDMA/133
[ 1.518106] ata4: EH complete
[ 1.551673] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.635616] ata1.01: XXX debounced rc=0
[ 1.635624] ata1.01: XXX phys link offline
[ 1.635627] ata1.01: XXX link_hardreset online=0 returning 0
[ 1.635650] ata1.00: about to softreset, devmask=3
[ 1.636925] ata2.01: XXX debounced rc=0
[ 1.636933] ata2.01: XXX phys link offline
[ 1.636936] ata2.01: XXX link_hardreset online=0 returning 0
[ 1.636959] ata2.00: about to softreset, devmask=3
[ 1.718251] usb 3-1: configuration #1 chosen from 1 choice
[ 1.786580] ata1.00: XXX CLASSIFY TF 00/01:01:14:eb
[ 1.786584] ata1.00: XXX ata_dev_classify=3
[ 1.786594] ata1.01: XXX CLASSIFY TF 00/01:01:14:eb
[ 1.786597] ata1.01: XXX ata_dev_classify=3
[ 1.786628] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.786640] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.787880] ata2.00: XXX CLASSIFY TF 50/01:01:00:00
[ 1.787884] ata2.00: XXX ata_dev_classify=1
[ 1.787895] ata2.01: XXX CLASSIFY TF 00/01:01:00:00
[ 1.787898] ata2.01: XXX ata_dev_classify=1
[ 1.787901] ata2.01: XXX stat==0 -> NONE
[ 1.787932] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.787944] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.789828] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB01, max UDMA/100
[ 1.795825] ata1.00: configured for UDMA/100
[ 1.796185] ata1: EH complete
[ 1.797632] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223B SB01 PQ: 0 ANSI: 5
[ 1.802141] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.802146] Uniform CD-ROM driver Revision: 3.20
[ 1.802481] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.802829] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.809055] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
[ 1.809060] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.828062] ata2.00: configured for UDMA/133
[ 1.828069] ata2: EH complete
[ 1.828203] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 1.828506] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.828571] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.828586] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 1.828628] sd 1:0:0:0: [sda] Write Protect is off
[ 1.828630] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.828657] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.828728] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.828782] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.828784] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.828811] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.829007] sda:
[ 1.829168] sdb:
[ 1.829327] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.842882] sda1 sda2 < sda5 >
[ 1.865724] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.892822] sdb1
[ 1.893182] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.893345] Freeing unused kernel memory: 516k freed
[ 1.893423] Write protecting the kernel read-only data: 7340k
[ 1.970489] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 2.058585] Floppy drive(s): fd0 is 1.44M
[ 2.074295] FDC 0 is a post-1991 82077
[ 2.078457] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.078476] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.078510] r8169 0000:04:00.0: setting latency timer to 64
[ 2.078565] r8169 0000:04:00.0: irq 53 for MSI/MSI-X
[ 2.078596] usbcore: registered new interface driver hiddev
[ 2.079776] eth0: RTL8168c/8111c at 0xffffc90000022000, 00:24:8c:a7:6e:2d, XID 3c4000c0 IRQ 53
[ 2.099205] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[ 2.099687] generic-usb 0003:046A:002F.0001: input,hidraw0: USB HID v1.11 Keyboard [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-1/input0
[ 2.126115] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4
[ 2.126309] generic-usb 0003:046A:002F.0002: input,hidraw1: USB HID v1.11 Mouse [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-1/input1
[ 2.126366] usbcore: registered new interface driver usbhid
[ 2.126371] usbhid: v2.6:USB HID core driver
[ 2.130046] usb 3-2: configuration #1 chosen from 1 choice
[ 2.146114] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5
[ 2.146275] generic-usb 0003:046D:C03D.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-2/input0
[ 2.442849] PM: Starting manual resume from disk
[ 2.442859] PM: Resume from partition 8:5
[ 2.442860] PM: Checking hibernation image.
[ 2.443189] PM: Resume from disk failed.
[ 2.482183] EXT4-fs (sda1): barriers enabled
[ 2.504052] kjournald2 starting: pid 972, dev sda1:8, commit interval 5 seconds
[ 2.504122] EXT4-fs (sda1): delayed allocation enabled
[ 2.504126] EXT4-fs: file extents enabled
[ 2.545854] EXT4-fs: mballoc enabled
[ 2.545912] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 5.773146] udev: starting version 141
[ 6.564864] nvidia: module license 'NVIDIA' taints kernel.
[ 6.564867] Disabling lock debugging due to kernel taint
[ 6.581410] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.638093] iTCO_vendor_support: vendor-support=0
[ 6.652116] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 6.652237] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 6.652278] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.735900] yenta_cardbus 0000:06:01.0: CardBus bridge found [1524:1410]
[ 6.735921] yenta_cardbus 0000:06:01.0: Using CSCINT to route CSC interrupts to PCI
[ 6.735923] yenta_cardbus 0000:06:01.0: Routing CardBus interrupts to PCI
[ 6.735929] yenta_cardbus 0000:06:01.0: TI: mfunc 0x00001002, devctl 0x44
[ 6.810358] cfg80211: Calling CRDA to update world regulatory domain
[ 6.822203] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 6.822211] nvidia 0000:02:00.0: setting latency timer to 64
[ 6.822304] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.18.03 Fri Jul 31 21:54:40 PDT 2009
[ 6.951849] cfg80211: World regulatory domain updated:
[ 6.951851] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.951854] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.951855] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.951857] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.951859] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.951860] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.960021] yenta_cardbus 0000:06:01.0: ISA IRQ mask 0x0000, PCI irq 17
[ 6.960024] yenta_cardbus 0000:06:01.0: Socket status: 30000020
[ 6.960027] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 6.960034] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
[ 6.960037] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xfb600000 - 0xfbefffff
[ 6.960039] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xf5000000 - 0xf6ffffff
[ 7.042372] rt61pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.143860] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.143882] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.147503] phy0: Selected rate control algorithm 'minstrel'
[ 7.148215] Registered led device: rt61pci-phy0::radio
[ 7.148259] Registered led device: rt61pci-phy0::assoc
[ 7.199082] hda_codec: Unknown model for ALC1200, trying auto-probe from BIOS...
[ 7.583945] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 7.583977] pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 7.584044] yenta_cardbus 0000:06:01.0: EnE: chaning testregister 0xC9, 0e -> 0c
[ 7.619415] RME Hammerfall DSP 0000:07:00.0: enabling device (0000 -> 0002)
[ 7.619424] RME Hammerfall DSP 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 18.614953] Hammerfall-DSP: no Digiface or Multiface connected!
[ 18.614984] RME Hammerfall DSP 0000:07:00.0: PCI INT A disabled
[ 18.614996] RME Hammerfall DSP: probe of 0000:07:00.0 failed with error -5
[ 18.785874] lp: driver loaded but no devices found
[ 18.951177] Adding 2000052k swap on /dev/sda5. Priority:-1 extents:1 across:2000052k
[ 19.491108] EXT4-fs (sda1): internal journal on sda1:8
[ 25.498480] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.498482] Bluetooth: BNEP filters: protocol multicast
[ 25.541380] Bridge firewalling registered
[ 26.660653] ppdev: user-space parallel port driver
[ 30.564546] r8169: eth0: link down
[ 30.565674] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.566123] rt61pci 0000:06:00.0: firmware: requesting rt2561.bin
[ 30.730955] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 59.224697] wlan0: authenticate with AP 00:24:fe:09:94:18
[ 59.226528] wlan0: authenticated
[ 59.226532] wlan0: associate with AP 00:24:fe:09:94:18
[ 59.229366] wlan0: RX AssocResp from 00:24:fe:09:94:18 (capab=0x401 status=0 aid=2)
[ 59.229370] wlan0: associated
[ 59.230902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 70.121665] wlan0: no IPv6 routers present[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-rc8 (tim@moka) (gcc version 4.4.1 (Ubuntu 4.4.1-1ubuntu1~jaunty1) ) #20 SMP PREEMPT Wed Sep 2 10:55:50 CEST 2009
[ 0.000000] Command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf680000 (usable)
[ 0.000000] BIOS-e820: 00000000bf680000 - 00000000bf698000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E3FFF write-protect
[ 0.000000] E4000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF700000 mask FFFF00000 uncachable
[ 0.000000] 5 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf680 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4c00 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf680000 (usable)
[ 0.000000] modified: 00000000bf680000 - 00000000bf698000 (ACPI data)
[ 0.000000] modified: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS)
[ 0.000000] modified: 00000000bf6dc000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf680000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf680000 page 4k
[ 0.000000] kernel direct mapping tables up to bf680000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] 0100000000 - 0340000000 page 2M
[ 0.000000] kernel direct mapping tables up to 340000000 @ 13000-21000
[ 0.000000] RAMDISK: 3783b000 - 37fef78c
[ 0.000000] ACPI: RSDP 00000000000fabd0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf680100 0005C (v01 022609 XSDT1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf680290 000F4 (v03 022609 FACP1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf6804b0 0C3DD (v01 A1146 A1146001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf698000 00040
[ 0.000000] ACPI: APIC 00000000bf680390 000D8 (v01 022609 APIC1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf680470 0003C (v01 022609 OEMMCFG 20090226 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf698040 00072 (v01 022609 OEMB1156 20090226 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf68f4b0 00038 (v01 022609 OEMHPET 20090226 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf68f4f0 000B0 (v01 022609 OEMOSFR 20090226 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf69a8f0 0249F (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0340000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0002171520] TEXT DATA BSS ==> [0001000000 - 0002171520]
[ 0.000000] #3 [003783b000 - 0037fef78c] RAMDISK ==> [003783b000 - 0037fef78c]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0002172000 - 0002172288] BRK ==> [0002172000 - 0002172288]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #7 [0000013000 - 000001c000] PGTABLE ==> [0000013000 - 000001c000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff880028600000-ffff8800377fffff] on node 0
[ 0.000000] [ffffea0010800000-ffffea0011dfffff] PMD -> [ffff880038000000-ffff8800395fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf680
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] On node 0 totalpages: 3143183
[ 0.000000] DMA zone: 88 pages used for memmap
[ 0.000000] DMA zone: 111 pages reserved
[ 0.000000] DMA zone: 3784 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 22440 pages used for memmap
[ 0.000000] DMA32 zone: 757464 pages, LIFO batch:31
[ 0.000000] Normal zone: 50688 pages used for memmap
[ 0.000000] Normal zone: 2308608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 8
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
[ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf680000 - 00000000bf698000
[ 0.000000] PM: Registered nosave memory: 00000000bf698000 - 00000000bf6dc000
[ 0.000000] PM: Registered nosave memory: 00000000bf6dc000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages at ffff880028084000, static data 87684 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3069856
[ 0.000000] Kernel command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 12183548k/13631488k available (5212k kernel code, 1058756k absent, 388196k reserved, 2998k data, 516k init)
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] NR_IRQS:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2672.360 MHz processor.
[ 0.001524] Console: colour VGA+ 80x25
[ 0.001536] console [tty0] enabled
[ 0.001560] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.001562] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.001563] ... MAX_LOCK_DEPTH: 48
[ 0.001564] ... MAX_LOCKDEP_KEYS: 8191
[ 0.001565] ... CLASSHASH_SIZE: 4096
[ 0.001566] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.001567] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.001569] ... CHAINHASH_SIZE: 16384
[ 0.001570] memory used by lock dependency info: 5695 kB
[ 0.001571] per task-struct memory footprint: 1920 bytes
[ 0.019782] allocated 125829120 bytes of page_cgroup
[ 0.019785] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.019988] hpet clockevent registered
[ 0.019991] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.020003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5344.72 BogoMIPS (lpj=2672360)
[ 0.020123] Security Framework initialized
[ 0.020127] SELinux: Disabled at boot.
[ 0.020178] Mount-cache hash table entries: 256
[ 0.021100] Initializing cgroup subsys ns
[ 0.021103] Initializing cgroup subsys cpuacct
[ 0.021109] Initializing cgroup subsys memory
[ 0.021143] Initializing cgroup subsys freezer
[ 0.021160] CPU: Physical Processor ID: 0
[ 0.021162] CPU: Processor Core ID: 0
[ 0.021164] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.021166] CPU: L2 cache: 256K
[ 0.021167] CPU: L3 cache: 8192K
[ 0.021170] using mwait in idle threads.
[ 0.021171] Performance Counters: Nehalem/Corei7 events, Intel PMU driver.
[ 0.021180] ... version: 3
[ 0.021181] ... bit width: 48
[ 0.021183] ... generic counters: 4
[ 0.021184] ... value mask: 0000ffffffffffff
[ 0.021185] ... max period: 000000007fffffff
[ 0.021186] ... fixed-purpose counters: 3
[ 0.021187] ... counter mask: 000000070000000f
[ 0.022015] ACPI: Core revision 20090521
[ 0.060487] Setting APIC routing to flat
[ 0.060968] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070967] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.175013] lockdep: fixing up alternatives.
[ 0.175135] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.185395] Initializing CPU#1
[ 0.246916] Calibrating delay using timer specific routine.. 5451.57 BogoMIPS (lpj=2725786)
[ 0.246924] CPU: Physical Processor ID: 0
[ 0.246925] CPU: Processor Core ID: 1
[ 0.246927] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.246929] CPU: L2 cache: 256K
[ 0.246929] CPU: L3 cache: 8192K
[ 0.247371] CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.247379] Skipping synchronization checks as TSC is reliable.
[ 0.247937] lockdep: fixing up alternatives.
[ 0.247962] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.258220] Initializing CPU#2
[ 0.318883] Calibrating delay using timer specific routine.. 5344.68 BogoMIPS (lpj=2672341)
[ 0.318890] CPU: Physical Processor ID: 0
[ 0.318891] CPU: Processor Core ID: 2
[ 0.318892] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.318894] CPU: L2 cache: 256K
[ 0.318895] CPU: L3 cache: 8192K
[ 0.319380] CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.319387] Skipping synchronization checks as TSC is reliable.
[ 0.319904] lockdep: fixing up alternatives.
[ 0.319933] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.330191] Initializing CPU#3
[ 0.390852] Calibrating delay using timer specific routine.. 5344.68 BogoMIPS (lpj=2672340)
[ 0.390858] CPU: Physical Processor ID: 0
[ 0.390859] CPU: Processor Core ID: 3
[ 0.390862] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.390863] CPU: L2 cache: 256K
[ 0.390864] CPU: L3 cache: 8192K
[ 0.391351] CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.391358] Skipping synchronization checks as TSC is reliable.
[ 0.391872] lockdep: fixing up alternatives.
[ 0.391899] Booting processor 4 APIC 0x1 ip 0x6000
[ 0.402157] Initializing CPU#4
[ 0.463822] Calibrating delay using timer specific routine.. 5451.57 BogoMIPS (lpj=2725785)
[ 0.463832] CPU: Physical Processor ID: 0
[ 0.463833] CPU: Processor Core ID: 0
[ 0.463836] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.463838] CPU: L2 cache: 256K
[ 0.463840] CPU: L3 cache: 8192K
[ 0.464353] CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.464361] Skipping synchronization checks as TSC is reliable.
[ 0.464842] lockdep: fixing up alternatives.
[ 0.464870] Booting processor 5 APIC 0x3 ip 0x6000
[ 0.475127] Initializing CPU#5
[ 0.535790] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672338)
[ 0.535796] CPU: Physical Processor ID: 0
[ 0.535797] CPU: Processor Core ID: 1
[ 0.535799] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.535800] CPU: L2 cache: 256K
[ 0.535801] CPU: L3 cache: 8192K
[ 0.536288] CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.536295] Skipping synchronization checks as TSC is reliable.
[ 0.536810] lockdep: fixing up alternatives.
[ 0.536838] Booting processor 6 APIC 0x5 ip 0x6000
[ 0.547096] Initializing CPU#6
[ 0.607758] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672338)
[ 0.607765] CPU: Physical Processor ID: 0
[ 0.607765] CPU: Processor Core ID: 2
[ 0.607767] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.607769] CPU: L2 cache: 256K
[ 0.607770] CPU: L3 cache: 8192K
[ 0.608256] CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.608264] Skipping synchronization checks as TSC is reliable.
[ 0.608779] lockdep: fixing up alternatives.
[ 0.608807] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.619064] Initializing CPU#7
[ 0.679727] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672338)
[ 0.679733] CPU: Physical Processor ID: 0
[ 0.679734] CPU: Processor Core ID: 3
[ 0.679736] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.679738] CPU: L2 cache: 256K
[ 0.679738] CPU: L3 cache: 8192K
[ 0.680225] CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.680232] Skipping synchronization checks as TSC is reliable.
[ 0.680252] Brought up 8 CPUs
[ 0.680254] Total of 8 processors activated (42971.25 BogoMIPS).
[ 0.680364] CPU0 attaching sched-domain:
[ 0.680366] domain 0: span 0,4 level SIBLING
[ 0.680368] groups: 0 4
[ 0.680371] domain 1: span 0-7 level MC
[ 0.680373] groups: 0,4 1,5 2,6 3,7
[ 0.680391] CPU1 attaching sched-domain:
[ 0.680392] domain 0: span 1,5 level SIBLING
[ 0.680394] groups: 1 5
[ 0.680397] domain 1: span 0-7 level MC
[ 0.680399] groups: 1,5 2,6 3,7 0,4
[ 0.680405] CPU2 attaching sched-domain:
[ 0.680406] domain 0: span 2,6 level SIBLING
[ 0.680408] groups: 2 6
[ 0.680411] domain 1: span 0-7 level MC
[ 0.680412] groups: 2,6 3,7 0,4 1,5
[ 0.680418] CPU3 attaching sched-domain:
[ 0.680420] domain 0: span 3,7 level SIBLING
[ 0.680421] groups: 3 7
[ 0.680424] domain 1: span 0-7 level MC
[ 0.680426] groups: 3,7 0,4 1,5 2,6
[ 0.680431] CPU4 attaching sched-domain:
[ 0.680433] domain 0: span 0,4 level SIBLING
[ 0.680435] groups: 4 0
[ 0.680437] domain 1: span 0-7 level MC
[ 0.680439] groups: 0,4 1,5 2,6 3,7
[ 0.680445] CPU5 attaching sched-domain:
[ 0.680446] domain 0: span 1,5 level SIBLING
[ 0.680448] groups: 5 1
[ 0.680451] domain 1: span 0-7 level MC
[ 0.680453] groups: 1,5 2,6 3,7 0,4
[ 0.680458] CPU6 attaching sched-domain:
[ 0.680460] domain 0: span 2,6 level SIBLING
[ 0.680461] groups: 6 2
[ 0.680464] domain 1: span 0-7 level MC
[ 0.680466] groups: 2,6 3,7 0,4 1,5
[ 0.680472] CPU7 attaching sched-domain:
[ 0.680473] domain 0: span 3,7 level SIBLING
[ 0.680475] groups: 7 3
[ 0.680478] domain 1: span 0-7 level MC
[ 0.680479] groups: 3,7 0,4 1,5 2,6
[ 0.681221] Booting paravirtualized kernel on bare hardware
[ 0.681480] regulator: core version 0.5
[ 0.681506] Time: 9:07:13 Date: 09/02/09
[ 0.681688] NET: Registered protocol family 16
[ 0.682116] ACPI: bus type pci registered
[ 0.682220] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.682222] PCI: Not using MMCONFIG.
[ 0.682224] PCI: Using configuration type 1 for base access
[ 0.683830] bio: create slab <bio-0> at 0
[ 0.686505] ACPI: EC: Look up EC in DSDT
[ 0.727566] ACPI: Interpreter enabled
[ 0.727570] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.727617] ACPI: Using IOAPIC for interrupt routing
[ 0.727681] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.730449] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.731948] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.744127] ACPI Warning: Incorrect checksum in table [OEMB] - 8B, should be 83 20090521 tbutils-246
[ 0.744387] ACPI: No dock devices found.
[ 0.744543] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.744765] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.744769] pci 0000:00:00.0: PME# disabled
[ 0.744839] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.744843] pci 0000:00:01.0: PME# disabled
[ 0.744914] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.744918] pci 0000:00:03.0: PME# disabled
[ 0.744991] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.744994] pci 0000:00:07.0: PME# disabled
[ 0.745411] pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f]
[ 0.745490] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f]
[ 0.745569] pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f]
[ 0.745654] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7fff000-0xf7fff3ff]
[ 0.745716] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.745721] pci 0000:00:1a.7: PME# disabled
[ 0.745768] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7ff8000-0xf7ffbfff]
[ 0.745816] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.745820] pci 0000:00:1b.0: PME# disabled
[ 0.745885] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.745889] pci 0000:00:1c.0: PME# disabled
[ 0.745961] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.745965] pci 0000:00:1c.2: PME# disabled
[ 0.746032] pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f]
[ 0.746112] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
[ 0.746190] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f]
[ 0.746278] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7ffe000-0xf7ffe3ff]
[ 0.746339] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.746343] pci 0000:00:1d.7: PME# disabled
[ 0.746480] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.746483] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.746487] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.746491] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[ 0.746552] pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007]
[ 0.746557] pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03]
[ 0.746563] pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887]
[ 0.746569] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803]
[ 0.746575] pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f]
[ 0.746581] pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f]
[ 0.746635] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7ffd000-0xf7ffd0ff]
[ 0.746650] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.746702] pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007]
[ 0.746708] pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03]
[ 0.746714] pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887]
[ 0.746720] pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803]
[ 0.746726] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f]
[ 0.746732] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f]
[ 0.746854] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.746864] pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.746874] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.746880] pci 0000:02:00.0: reg 24 io port: [0xcc00-0xcc7f]
[ 0.746886] pci 0000:02:00.0: reg 30 32bit mmio: [0xfb480000-0xfb4fffff]
[ 0.746962] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff]
[ 0.746966] pci 0000:00:03.0: bridge 32bit mmio: [0xf8000000-0xfb4fffff]
[ 0.746972] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.747089] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf4f00000-0xf4ffffff]
[ 0.747140] pci 0000:04:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.747162] pci 0000:04:00.0: reg 18 64bit mmio: [0xfb5ff000-0xfb5fffff]
[ 0.747177] pci 0000:04:00.0: reg 20 64bit mmio: [0xf4ef0000-0xf4efffff]
[ 0.747185] pci 0000:04:00.0: reg 30 32bit mmio: [0xfb5c0000-0xfb5dffff]
[ 0.747231] pci 0000:04:00.0: supports D1 D2
[ 0.747233] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.747238] pci 0000:04:00.0: PME# disabled
[ 0.747312] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
[ 0.747316] pci 0000:00:1c.2: bridge 32bit mmio: [0xfb500000-0xfb5fffff]
[ 0.747322] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4e00000-0xf4efffff]
[ 0.747363] pci 0000:06:00.0: reg 10 32bit mmio: [0xfb6f8000-0xfb6fffff]
[ 0.747453] pci 0000:06:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.747475] pci 0000:06:01.0: supports D1 D2
[ 0.747476] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.747481] pci 0000:06:01.0: PME# disabled
[ 0.747544] pci 0000:00:1e.0: transparent bridge
[ 0.747548] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.747552] pci 0000:00:1e.0: bridge 32bit mmio: [0xfb600000-0xfbefffff]
[ 0.747558] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf5000000-0xf6ffffff]
[ 0.747606] pci_bus 0000:00: on NUMA node 0
[ 0.747611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.748042] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.748192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.748269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.748352] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 0.748418] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 0.748484] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 0.780970] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.781106] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.781240] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.781373] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.781506] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.781654] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.781790] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.781923] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 0.782249] SCSI subsystem initialized
[ 0.782442] libata version 3.00 loaded.
[ 0.782542] usbcore: registered new interface driver usbfs
[ 0.782563] usbcore: registered new interface driver hub
[ 0.782594] usbcore: registered new device driver usb
[ 0.782780] ACPI: WMI: Mapper loaded
[ 0.782782] PCI: Using ACPI for IRQ routing
[ 0.792242] Bluetooth: Core ver 2.15
[ 0.792277] NET: Registered protocol family 31
[ 0.792279] Bluetooth: HCI device and connection manager initialized
[ 0.792298] Bluetooth: HCI socket layer initialized
[ 0.792300] NET: Registered protocol family 8
[ 0.792301] NET: Registered protocol family 20
[ 0.792319] NetLabel: Initializing
[ 0.792320] NetLabel: domain hash size = 128
[ 0.792321] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.792362] NetLabel: unlabeled traffic allowed by default
[ 0.792615] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.792620] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.800737] Switched to high resolution mode on CPU 0
[ 0.801129] Switched to high resolution mode on CPU 3
[ 0.801131] Switched to high resolution mode on CPU 2
[ 0.801143] Switched to high resolution mode on CPU 1
[ 0.801195] Switched to high resolution mode on CPU 5
[ 0.801197] Switched to high resolution mode on CPU 6
[ 0.801198] Switched to high resolution mode on CPU 7
[ 0.801206] Switched to high resolution mode on CPU 4
[ 0.814960] pnp: PnP ACPI init
[ 0.814992] ACPI: bus type pnp registered
[ 0.818619] pnp: PnP ACPI: found 15 devices
[ 0.818621] ACPI: ACPI bus type pnp unregistered
[ 0.818634] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
[ 0.818637] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[ 0.818639] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[ 0.818642] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[ 0.818644] system 00:01: iomem range 0xfec8a000-0xfec8afff could not be reserved
[ 0.818647] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
[ 0.818656] system 00:07: ioport range 0x290-0x29f has been reserved
[ 0.818663] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.818665] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.818668] system 00:08: ioport range 0x500-0x57f could not be reserved
[ 0.818670] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.818673] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.818675] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 0.818683] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
[ 0.818690] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.818694] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.818703] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.818712] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.818714] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.818717] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.818719] system 00:0e: iomem range 0x100000-0xbfefffff could not be reserved
[ 0.818722] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved
[ 0.823626] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.823628] pci 0000:00:01.0: IO window: disabled
[ 0.823632] pci 0000:00:01.0: MEM window: disabled
[ 0.823635] pci 0000:00:01.0: PREFETCH window: disabled
[ 0.823639] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 0.823642] pci 0000:00:03.0: IO window: 0xc000-0xcfff
[ 0.823646] pci 0000:00:03.0: MEM window: 0xf8000000-0xfb4fffff
[ 0.823650] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.823655] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 0.823657] pci 0000:00:07.0: IO window: disabled
[ 0.823661] pci 0000:00:07.0: MEM window: disabled
[ 0.823664] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.823668] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[ 0.823669] pci 0000:00:1c.0: IO window: disabled
[ 0.823673] pci 0000:00:1c.0: MEM window: disabled
[ 0.823677] pci 0000:00:1c.0: PREFETCH window: 0x000000f4f00000-0x000000f4ffffff
[ 0.823683] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.823686] pci 0000:00:1c.2: IO window: 0xd000-0xdfff
[ 0.823692] pci 0000:00:1c.2: MEM window: 0xfb500000-0xfb5fffff
[ 0.823697] pci 0000:00:1c.2: PREFETCH window: 0x000000f4e00000-0x000000f4efffff
[ 0.823710] pci 0000:06:01.0: CardBus bridge, secondary bus 0000:07
[ 0.823712] pci 0000:06:01.0: IO window: 0x00e000-0x00e0ff
[ 0.823716] pci 0000:06:01.0: IO window: 0x00e400-0x00e4ff
[ 0.823721] pci 0000:06:01.0: PREFETCH window: 0xc0000000-0xc3ffffff
[ 0.823725] pci 0000:06:01.0: MEM window: 0xc4000000-0xc7ffffff
[ 0.823729] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.823732] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.823737] pci 0000:00:1e.0: MEM window: 0xfb600000-0xfbefffff
[ 0.823741] pci 0000:00:1e.0: PREFETCH window: 0x000000f5000000-0x000000f6ffffff
[ 0.823753] pci 0000:00:01.0: setting latency timer to 64
[ 0.823761] pci 0000:00:03.0: setting latency timer to 64
[ 0.823769] pci 0000:00:07.0: setting latency timer to 64
[ 0.823780] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.823784] pci 0000:00:1c.0: setting latency timer to 64
[ 0.823793] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.823796] pci 0000:00:1c.2: setting latency timer to 64
[ 0.823803] pci 0000:00:1e.0: setting latency timer to 64
[ 0.823810] pci 0000:06:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.823816] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.823818] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.823820] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.823821] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfb4fffff]
[ 0.823823] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.823825] pci_bus 0000:05: resource 2 pref mem [0xf4f00000-0xf4ffffff]
[ 0.823827] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.823829] pci_bus 0000:04: resource 1 mem: [0xfb500000-0xfb5fffff]
[ 0.823831] pci_bus 0000:04: resource 2 pref mem [0xf4e00000-0xf4efffff]
[ 0.823832] pci_bus 0000:06: resource 0 io: [0xe000-0xefff]
[ 0.823834] pci_bus 0000:06: resource 1 mem: [0xfb600000-0xfbefffff]
[ 0.823836] pci_bus 0000:06: resource 2 pref mem [0xf5000000-0xf6ffffff]
[ 0.823838] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.823839] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.823841] pci_bus 0000:07: resource 0 io: [0xe000-0xe0ff]
[ 0.823843] pci_bus 0000:07: resource 1 io: [0xe400-0xe4ff]
[ 0.823844] pci_bus 0000:07: resource 2 pref mem [0xc0000000-0xc3ffffff]
[ 0.823846] pci_bus 0000:07: resource 3 mem: [0xc4000000-0xc7ffffff]
[ 0.823966] NET: Registered protocol family 2
[ 0.824183] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.825251] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.825871] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 0.829881] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.829904] TCP reno registered
[ 0.830120] NET: Registered protocol family 1
[ 0.830320] Trying to unpack rootfs image as initramfs...
[ 0.972261] Freeing initrd memory: 7889k freed
[ 0.974093] Scanning for low memory corruption every 60 seconds
[ 0.974337] audit: initializing netlink socket (disabled)
[ 0.974372] type=2000 audit(1251882432.817:1): initialized
[ 0.978297] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.978688] VFS: Disk quotas dquot_6.5.2
[ 0.978754] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.979696] fuse init (API version 7.12)
[ 0.979764] msgmni has been set to 23813
[ 0.980353] alg: No test for stdrng (krng)
[ 0.980398] io scheduler noop registered
[ 0.980400] io scheduler anticipatory registered
[ 0.980402] io scheduler deadline registered
[ 0.980442] io scheduler cfq registered (default)
[ 0.980600] pci 0000:02:00.0: Boot video device
[ 0.980815] pcieport-driver 0000:00:01.0: irq 48 for MSI/MSI-X
[ 0.980823] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.980969] pcieport-driver 0000:00:03.0: irq 49 for MSI/MSI-X
[ 0.980976] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 0.981113] pcieport-driver 0000:00:07.0: irq 50 for MSI/MSI-X
[ 0.981120] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 0.981253] pcieport-driver 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 0.981261] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.981405] pcieport-driver 0000:00:1c.2: irq 52 for MSI/MSI-X
[ 0.981414] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.981522] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.981542] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.981551] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 0.981563] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.981704] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.981949] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.981953] ACPI: Power Button [PWRF]
[ 0.982034] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.982037] ACPI: Power Button [PWRB]
[ 0.983092] ACPI: SSDT 00000000bf6980c0 00403 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.983948] ACPI: SSDT 00000000bf69a140 003B2 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.986865] Monitor-Mwait will be used to enter C-1 state
[ 0.986920] Monitor-Mwait will be used to enter C-2 state
[ 0.986952] Monitor-Mwait will be used to enter C-3 state
[ 0.987091] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.987222] processor LNXCPU:00: registered as cooling_device0
[ 0.987771] ACPI: SSDT 00000000bf6984d0 00403 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.988568] ACPI: SSDT 00000000bf69a500 00085 (v01 PmRef P002Cst 00003000 INTL 20060113)
[ 0.991518] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.991552] processor LNXCPU:01: registered as cooling_device1
[ 0.992105] ACPI: SSDT 00000000bf6988e0 00403 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.992907] ACPI: SSDT 00000000bf69a590 00085 (v01 PmRef P003Cst 00003000 INTL 20060113)
[ 0.995862] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
[ 0.995896] processor LNXCPU:02: registered as cooling_device2
[ 0.996438] ACPI: SSDT 00000000bf698cf0 00403 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.997247] ACPI: SSDT 00000000bf69a620 00085 (v01 PmRef P004Cst 00003000 INTL 20060113)
[ 1.000200] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
[ 1.000241] processor LNXCPU:03: registered as cooling_device3
[ 1.000789] ACPI: SSDT 00000000bf699100 00403 (v01 DpgPmm P005Ist 00000012 INTL 20060113)
[ 1.001593] ACPI: SSDT 00000000bf69a6b0 00085 (v01 PmRef P005Cst 00003000 INTL 20060113)
[ 1.004560] ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3])
[ 1.004594] processor LNXCPU:04: registered as cooling_device4
[ 1.005147] ACPI: SSDT 00000000bf699510 00403 (v01 DpgPmm P006Ist 00000012 INTL 20060113)
[ 1.005962] ACPI: SSDT 00000000bf69a740 00085 (v01 PmRef P006Cst 00003000 INTL 20060113)
[ 1.008908] ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3])
[ 1.008943] processor LNXCPU:05: registered as cooling_device5
[ 1.009489] ACPI: SSDT 00000000bf699920 00403 (v01 DpgPmm P007Ist 00000012 INTL 20060113)
[ 1.010302] ACPI: SSDT 00000000bf69a7d0 00085 (v01 PmRef P007Cst 00003000 INTL 20060113)
[ 1.013255] ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3])
[ 1.013294] processor LNXCPU:06: registered as cooling_device6
[ 1.013844] ACPI: SSDT 00000000bf699d30 00403 (v01 DpgPmm P008Ist 00000012 INTL 20060113)
[ 1.014666] ACPI: SSDT 00000000bf69a860 00085 (v01 PmRef P008Cst 00003000 INTL 20060113)
[ 1.017618] ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3])
[ 1.017654] processor LNXCPU:07: registered as cooling_device7
[ 1.020837] XENFS: not registering filesystem on non-xen platform
[ 1.022558] Linux agpgart interface v0.103
[ 1.022562] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.024593] brd: module loaded
[ 1.025299] loop: module loaded
[ 1.025390] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.025573] ata_piix 0000:00:1f.2: version 2.13
[ 1.025591] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.025595] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.025648] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.025728] scsi0 : ata_piix
[ 1.026028] scsi1 : ata_piix
[ 1.027847] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 20
[ 1.027852] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 20
[ 1.027876] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.027881] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.027920] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.027944] ata1.00: hard resetting link
[ 1.027974] scsi2 : ata_piix
[ 1.027984] ata2.00: hard resetting link
[ 1.028047] scsi3 : ata_piix
[ 1.029817] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 20
[ 1.029821] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 20
[ 1.029910] ata1.00: XXX bringing up link
[ 1.029916] ata2.00: XXX bringing up link
[ 1.030928] Fixed MDIO Bus: probed
[ 1.030932] PPP generic driver version 2.4.2
[ 1.031151] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.031175] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.031186] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.031189] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.031994] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.032639] ata3: hard resetting link
[ 1.032659] ata4: hard resetting link
[ 1.035031] ata3: XXX bringing up link
[ 1.035037] ata4: XXX bringing up link
[ 1.035903] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.035909] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.035925] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
[ 1.044623] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.045060] usb usb1: configuration #1 chosen from 1 choice
[ 1.045252] hub 1-0:1.0: USB hub found
[ 1.045278] hub 1-0:1.0: 6 ports detected
[ 1.045580] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.045592] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.045596] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.045715] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.049630] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.049635] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.049650] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
[ 1.058595] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.058718] usb usb2: configuration #1 chosen from 1 choice
[ 1.058754] hub 2-0:1.0: USB hub found
[ 1.058761] hub 2-0:1.0: 6 ports detected
[ 1.058868] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.058892] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.058932] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.058938] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.058941] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.058998] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.059031] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 1.059136] usb usb3: configuration #1 chosen from 1 choice
[ 1.059174] hub 3-0:1.0: USB hub found
[ 1.059218] hub 3-0:1.0: 2 ports detected
[ 1.059317] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.059323] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.059326] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.059378] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.059412] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 1.059516] usb usb4: configuration #1 chosen from 1 choice
[ 1.059552] hub 4-0:1.0: USB hub found
[ 1.059559] hub 4-0:1.0: 2 ports detected
[ 1.059649] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.059655] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.059658] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.059710] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.059744] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
[ 1.059852] usb usb5: configuration #1 chosen from 1 choice
[ 1.059888] hub 5-0:1.0: USB hub found
[ 1.059895] hub 5-0:1.0: 2 ports detected
[ 1.059973] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.059979] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.059982] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.060035] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.060059] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 1.060161] usb usb6: configuration #1 chosen from 1 choice
[ 1.060197] hub 6-0:1.0: USB hub found
[ 1.060203] hub 6-0:1.0: 2 ports detected
[ 1.060277] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.060283] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.060286] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.060339] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.060363] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 1.060488] usb usb7: configuration #1 chosen from 1 choice
[ 1.060525] hub 7-0:1.0: USB hub found
[ 1.060557] hub 7-0:1.0: 2 ports detected
[ 1.060637] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.060643] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.060646] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.060698] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.060723] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 1.060831] usb usb8: configuration #1 chosen from 1 choice
[ 1.060870] hub 8-0:1.0: USB hub found
[ 1.060876] hub 8-0:1.0: 2 ports detected
[ 1.061019] PNP: No PS/2 controller found. Probing ports directly.
[ 1.063793] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.063823] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.064201] mice: PS/2 mouse device common for all mice
[ 1.064321] rtc_cmos 00:03: RTC can wake from S4
[ 1.064529] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.064556] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.064696] device-mapper: uevent: version 1.0.3
[ 1.064802] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.065000] device-mapper: multipath: version 1.1.0 loaded
[ 1.065029] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.065874] cpuidle: using governor ladder
[ 1.066585] cpuidle: using governor menu
[ 1.067244] TCP cubic registered
[ 1.067607] NET: Registered protocol family 10
[ 1.068730] lo: Disabled Privacy Extensions
[ 1.069370] NET: Registered protocol family 17
[ 1.069434] Bluetooth: L2CAP ver 2.13
[ 1.069436] Bluetooth: L2CAP socket layer initialized
[ 1.069439] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.069440] Bluetooth: SCO socket layer initialized
[ 1.069629] Bluetooth: RFCOMM TTY layer initialized
[ 1.069633] Bluetooth: RFCOMM socket layer initialized
[ 1.069634] Bluetooth: RFCOMM ver 1.11
[ 1.077676] PM: Resume from disk failed.
[ 1.077693] registered taskstats version 1
[ 1.077888] Magic number: 9:185:120
[ 1.077890] misc device-mapper: hash matches
[ 1.078106] rtc_cmos 00:03: setting system clock to 2009-09-02 09:07:13 UTC (1251882433)
[ 1.078109] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.078110] EDD information not available.
[ 1.332600] ata1.00: XXX debounced rc=0
[ 1.332608] ata1.00: XXX setting online
[ 1.332611] ata1.00: XXX link_hardreset online=1 returning 0
[ 1.332614] ata1.01: hard resetting link
[ 1.332629] ata2.00: XXX debounced rc=0
[ 1.332635] ata2.00: XXX setting online
[ 1.332638] ata2.00: XXX link_hardreset online=1 returning 0
[ 1.332640] ata2.01: hard resetting link
[ 1.334597] ata1.01: XXX bringing up link
[ 1.334608] ata2.01: XXX bringing up link
[ 1.337539] ata3: XXX debounced rc=0
[ 1.337547] ata3: XXX setting online
[ 1.337549] ata3: XXX link_hardreset online=1 returning 0
[ 1.337565] ata3: about to softreset, devmask=1
[ 1.337616] ata4: XXX debounced rc=0
[ 1.337622] ata4: XXX setting online
[ 1.337624] ata4: XXX link_hardreset online=1 returning 0
[ 1.337638] ata4: about to softreset, devmask=1
[ 1.488474] ata3.00: XXX CLASSIFY TF 50/01:01:00:00
[ 1.488478] ata3.00: XXX ata_dev_classify=1
[ 1.488508] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.488726] ata4.00: XXX CLASSIFY TF 50/01:01:00:00
[ 1.488728] ata4.00: XXX ata_dev_classify=1
[ 1.488754] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.507954] ata3.00: ATA-7: SAMSUNG HD753LJ, 1AA01112, max UDMA7
[ 1.507958] ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.510917] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 1.510922] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.513899] ata4.00: configured for UDMA/133
[ 1.513905] ata4: EH complete
[ 1.526898] ata3.00: configured for UDMA/133
[ 1.526904] ata3: EH complete
[ 1.552500] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.637457] ata1.01: XXX debounced rc=0
[ 1.637464] ata1.01: XXX phys link offline
[ 1.637467] ata1.01: XXX link_hardreset online=0 returning 0
[ 1.637491] ata1.00: about to softreset, devmask=3
[ 1.637543] ata2.01: XXX debounced rc=0
[ 1.637548] ata2.01: XXX phys link offline
[ 1.637549] ata2.01: XXX link_hardreset online=0 returning 0
[ 1.637569] ata2.00: about to softreset, devmask=3
[ 1.719036] usb 3-1: configuration #1 chosen from 1 choice
[ 1.788422] ata1.00: XXX CLASSIFY TF 00/01:01:14:eb
[ 1.788426] ata1.00: XXX ata_dev_classify=3
[ 1.788437] ata1.01: XXX CLASSIFY TF 00/01:01:14:eb
[ 1.788439] ata1.01: XXX ata_dev_classify=3
[ 1.788471] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.788485] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.788674] ata2.00: XXX CLASSIFY TF 50/01:01:00:00
[ 1.788675] ata2.00: XXX ata_dev_classify=1
[ 1.788684] ata2.01: XXX CLASSIFY TF 00/01:01:00:00
[ 1.788686] ata2.01: XXX ata_dev_classify=1
[ 1.788688] ata2.01: XXX stat==0 -> NONE
[ 1.788715] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.788725] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.791694] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB01, max UDMA/100
[ 1.797656] ata1.00: configured for UDMA/100
[ 1.798023] ata1: EH complete
[ 1.799475] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223B SB01 PQ: 0 ANSI: 5
[ 1.803807] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.803812] Uniform CD-ROM driver Revision: 3.20
[ 1.804105] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.804500] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.810886] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
[ 1.810890] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.829905] ata2.00: configured for UDMA/133
[ 1.829912] ata2: EH complete
[ 1.830171] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 1.830520] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.830532] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.830589] sd 1:0:0:0: [sda] Write Protect is off
[ 1.830592] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.830619] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.830685] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5
[ 1.830839] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.830878] sd 2:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.830929] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.830931] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.830952] sda:
[ 1.830957] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.831240] sdb:
[ 1.831368] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 1.831558] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.831574] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.831619] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.831622] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.831649] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.831809] sdc: sdb1
[ 1.838752] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.840621] sda1 sda2 < sda5 >
[ 1.863362] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.877964] sdc1
[ 1.878372] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.878540] Freeing unused kernel memory: 516k freed
[ 1.878613] Write protecting the kernel read-only data: 7340k
[ 1.970285] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 2.057358] Floppy drive(s): fd0 is 1.44M
[ 2.070582] usbcore: registered new interface driver hiddev
[ 2.072204] FDC 0 is a post-1991 82077
[ 2.078092] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.078112] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.078152] r8169 0000:04:00.0: setting latency timer to 64
[ 2.078217] r8169 0000:04:00.0: irq 53 for MSI/MSI-X
[ 2.079658] eth0: RTL8168c/8111c at 0xffffc90000022000, 00:24:8c:a7:6e:2d, XID 3c4000c0 IRQ 53
[ 2.090998] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[ 2.091798] generic-usb 0003:046A:002F.0001: input,hidraw0: USB HID v1.11 Keyboard [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-1/input0
[ 2.115910] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4
[ 2.116050] generic-usb 0003:046A:002F.0002: input,hidraw1: USB HID v1.11 Mouse [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-1/input1
[ 2.116082] usbcore: registered new interface driver usbhid
[ 2.116086] usbhid: v2.6:USB HID core driver
[ 2.129845] usb 3-2: configuration #1 chosen from 1 choice
[ 2.145914] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5
[ 2.146066] generic-usb 0003:046D:C03D.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-2/input0
[ 2.427671] PM: Starting manual resume from disk
[ 2.427681] PM: Resume from partition 8:5
[ 2.427682] PM: Checking hibernation image.
[ 2.428014] PM: Resume from disk failed.
[ 2.471770] EXT4-fs (sda1): barriers enabled
[ 2.493684] kjournald2 starting: pid 1001, dev sda1:8, commit interval 5 seconds
[ 2.493775] EXT4-fs (sda1): delayed allocation enabled
[ 2.493779] EXT4-fs: file extents enabled
[ 2.532964] EXT4-fs: mballoc enabled
[ 2.533021] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 5.687936] udev: starting version 141
[ 6.130418] iTCO_vendor_support: vendor-support=0
[ 6.144362] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 6.144461] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 6.144667] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.504707] nvidia: module license 'NVIDIA' taints kernel.
[ 6.504711] Disabling lock debugging due to kernel taint
[ 6.545923] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.623094] yenta_cardbus 0000:06:01.0: CardBus bridge found [1524:1410]
[ 6.623115] yenta_cardbus 0000:06:01.0: Using CSCINT to route CSC interrupts to PCI
[ 6.623116] yenta_cardbus 0000:06:01.0: Routing CardBus interrupts to PCI
[ 6.623121] yenta_cardbus 0000:06:01.0: TI: mfunc 0x00001002, devctl 0x44
[ 6.641168] cfg80211: Calling CRDA to update world regulatory domain
[ 6.734026] cfg80211: World regulatory domain updated:
[ 6.734028] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.734030] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.734032] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.734034] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.734036] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.734037] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.761488] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 6.761496] nvidia 0000:02:00.0: setting latency timer to 64
[ 6.761610] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.18.03 Fri Jul 31 21:54:40 PDT 2009
[ 6.846753] yenta_cardbus 0000:06:01.0: ISA IRQ mask 0x0000, PCI irq 17
[ 6.846757] yenta_cardbus 0000:06:01.0: Socket status: 30000020
[ 6.846759] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 6.846767] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
[ 6.846770] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xfb600000 - 0xfbefffff
[ 6.846772] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xf5000000 - 0xf6ffffff
[ 6.847498] rt61pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.892912] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.892936] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.931552] phy0: Selected rate control algorithm 'minstrel'
[ 6.932293] Registered led device: rt61pci-phy0::radio
[ 6.932391] Registered led device: rt61pci-phy0::assoc
[ 6.948154] hda_codec: Unknown model for ALC1200, trying auto-probe from BIOS...
[ 7.470698] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 7.470731] pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 7.470798] yenta_cardbus 0000:06:01.0: EnE: chaning testregister 0xC9, 0e -> 0c
[ 7.509448] RME Hammerfall DSP 0000:07:00.0: enabling device (0000 -> 0002)
[ 7.509457] RME Hammerfall DSP 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 18.504439] Hammerfall-DSP: no Digiface or Multiface connected!
[ 18.504470] RME Hammerfall DSP 0000:07:00.0: PCI INT A disabled
[ 18.504483] RME Hammerfall DSP: probe of 0000:07:00.0 failed with error -5
[ 18.618079] lp: driver loaded but no devices found
[ 18.769195] Adding 2000052k swap on /dev/sda5. Priority:-1 extents:1 across:2000052k
[ 19.305345] EXT4-fs (sda1): internal journal on sda1:8
[ 25.595762] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.595764] Bluetooth: BNEP filters: protocol multicast
[ 25.638709] Bridge firewalling registered
[ 26.658704] ppdev: user-space parallel port driver
[ 30.564499] r8169: eth0: link down
[ 30.565686] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.566175] rt61pci 0000:06:00.0: firmware: requesting rt2561.bin
[ 30.664049] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 48.821094] wlan0: authenticate with AP 00:24:fe:09:94:18
[ 48.823131] wlan0: authenticated
[ 48.823135] wlan0: associate with AP 00:24:fe:09:94:18
[ 48.826164] wlan0: RX AssocResp from 00:24:fe:09:94:18 (capab=0x401 status=0 aid=2)
[ 48.826166] wlan0: associated
[ 48.827529] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 59.049181] wlan0: no IPv6 routers present[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2009-09-02 11:17    [from the cache]
©2003-2011 Jasper Spaans. Advertise on this site