lkml.org 
[lkml]   [2009]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 72/79] usb-serial: put subroutines in logical order
Date
From: Alan Stern <stern@rowland.harvard.edu>

This patch (as1285) rearranges the subroutines in usb-serial.c
concerned with tty lifetimes into a more logical order: install, open,
hangup, close, release. It also updates the formatting of the
kerneldoc comments.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/usb-serial.c | 154 +++++++++++++++++++-------------------
1 files changed, 77 insertions(+), 77 deletions(-)

diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index f1a1f0f..266dc58 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -166,6 +166,41 @@ void usb_serial_put(struct usb_serial *serial)
/*****************************************************************************
* Driver tty interface functions
*****************************************************************************/
+
+/**
+ * serial_install - install tty
+ * @driver: the driver (USB in our case)
+ * @tty: the tty being created
+ *
+ * Create the termios objects for this tty. We use the default
+ * USB serial settings but permit them to be overridden by
+ * serial->type->init_termios.
+ */
+static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ int idx = tty->index;
+ struct usb_serial *serial;
+ int retval;
+
+ /* If the termios setup has yet to be done */
+ if (tty->driver->termios[idx] == NULL) {
+ /* perform the standard setup */
+ retval = tty_init_termios(tty);
+ if (retval)
+ return retval;
+ /* allow the driver to update it */
+ serial = usb_serial_get_by_index(tty->index);
+ if (serial->type->init_termios)
+ serial->type->init_termios(tty);
+ usb_serial_put(serial);
+ }
+ /* Final install (we use the default method) */
+ tty_driver_kref_get(driver);
+ tty->count++;
+ driver->ttys[idx] = tty;
+ return 0;
+}
+
static int serial_open (struct tty_struct *tty, struct file *filp)
{
struct usb_serial *serial;
@@ -264,13 +299,11 @@ bailout_serial_put:
}

/**
- * serial_do_down - shut down hardware
- * @port: port to shut down
+ * serial_do_down - shut down hardware
+ * @port: port to shut down
*
- * Shut down a USB port unless it is the console. We never shut down the
- * console hardware as it will always be in use.
- *
- * Don't free any resources at this point
+ * Shut down a USB serial port unless it is the console. We never
+ * shut down the console hardware as it will always be in use.
*/
static void serial_do_down(struct usb_serial_port *port)
{
@@ -278,8 +311,10 @@ static void serial_do_down(struct usb_serial_port *port)
struct usb_serial *serial;
struct module *owner;

- /* The console is magical, do not hang up the console hardware
- or there will be tears */
+ /*
+ * The console is magical. Do not hang up the console hardware
+ * or there will be tears.
+ */
if (port->console)
return;

@@ -293,24 +328,50 @@ static void serial_do_down(struct usb_serial_port *port)
mutex_unlock(&port->mutex);
}

+static void serial_hangup(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ serial_do_down(port);
+ tty_port_hangup(&port->port);
+ /* We must not free port yet - the USB serial layer depends on it's
+ continued existence */
+}
+
+static void serial_close(struct tty_struct *tty, struct file *filp)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ if (!port)
+ return;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ if (tty_port_close_start(&port->port, tty, filp) == 0)
+ return;
+ serial_do_down(port);
+ tty_port_close_end(&port->port, tty);
+ tty_port_tty_set(&port->port, NULL);
+
+}
+
/**
- * serial_do_free - free resources post close/hangup
- * @port: port to free up
+ * serial_do_free - free resources post close/hangup
+ * @port: port to free up
*
- * Do the resource freeing and refcount dropping for the port. We must
- * be careful about ordering and we must avoid freeing up the console.
+ * Do the resource freeing and refcount dropping for the port.
+ * Avoid freeing the console.
*
- * Called when the last tty kref is dropped.
+ * Called when the last tty kref is dropped.
*/
-
static void serial_do_free(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial;
struct module *owner;

- /* The console is magical, do not hang up the console hardware
- or there will be tears */
+ /* The console is magical. Do not hang up the console hardware
+ * or there will be tears.
+ */
if (port == NULL || port->console)
return;

@@ -326,32 +387,6 @@ static void serial_do_free(struct tty_struct *tty)
module_put(owner);
}

-static void serial_close(struct tty_struct *tty, struct file *filp)
-{
- struct usb_serial_port *port = tty->driver_data;
-
- if (!port)
- return;
-
- dbg("%s - port %d", __func__, port->number);
-
- if (tty_port_close_start(&port->port, tty, filp) == 0)
- return;
- serial_do_down(port);
- tty_port_close_end(&port->port, tty);
- tty_port_tty_set(&port->port, NULL);
-
-}
-
-static void serial_hangup(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- serial_do_down(port);
- tty_port_hangup(&port->port);
- /* We must not free port yet - the USB serial layer depends on it's
- continued existence */
-}
-
static int serial_write(struct tty_struct *tty, const unsigned char *buf,
int count)
{
@@ -699,41 +734,6 @@ static const struct tty_port_operations serial_port_ops = {
.dtr_rts = serial_dtr_rts,
};

-/**
- * serial_install - install tty
- * @driver: the driver (USB in our case)
- * @tty: the tty being created
- *
- * Create the termios objects for this tty. We use the default USB
- * serial ones but permit them to be overriddenby serial->type->termios.
- * This lets us remove all the ugly hackery
- */
-
-static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
-{
- int idx = tty->index;
- struct usb_serial *serial;
- int retval;
-
- /* If the termios setup has yet to be done */
- if (tty->driver->termios[idx] == NULL) {
- /* perform the standard setup */
- retval = tty_init_termios(tty);
- if (retval)
- return retval;
- /* allow the driver to update it */
- serial = usb_serial_get_by_index(tty->index);
- if (serial->type->init_termios)
- serial->type->init_termios(tty);
- usb_serial_put(serial);
- }
- /* Final install (we use the default method) */
- tty_driver_kref_get(driver);
- tty->count++;
- driver->ttys[idx] = tty;
- return 0;
-}
-
int usb_serial_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
--
1.6.4.2


\
 
 \ /
  Last update: 2009-09-20 00:15    [W:0.325 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site