lkml.org 
[lkml]   [2009]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 50/79] serial: move the flags into the tty_port field
Date
From: Alan Cox <alan@linux.intel.com>

Fortunately the serial layer was designed to use the same flag values but
with different names. It has its own SUSPENDED flag which is a free slot in
the ASYNC flags so we allocate it in the ASYNC flags instead.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/serial_core.c | 153 +++++++++++++++++++++---------------------
include/linux/serial.h | 2 +
include/linux/serial_core.h | 48 +++++--------
3 files changed, 98 insertions(+), 105 deletions(-)

diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 4af3364..744dec9 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -29,10 +29,10 @@
#include <linux/console.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
-#include <linux/serial_core.h>
#include <linux/smp_lock.h>
#include <linux/device.h>
#include <linux/serial.h> /* for serial_state and serial_icounter_struct */
+#include <linux/serial_core.h>
#include <linux/delay.h>
#include <linux/mutex.h>

@@ -146,7 +146,7 @@ static int uart_startup(struct uart_state *state, int init_hw)
unsigned long page;
int retval = 0;

- if (state->flags & UIF_INITIALIZED)
+ if (port->flags & ASYNC_INITIALIZED)
return 0;

/*
@@ -189,14 +189,14 @@ static int uart_startup(struct uart_state *state, int init_hw)
uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
}

- if (state->flags & UIF_CTS_FLOW) {
+ if (port->flags & ASYNC_CTS_FLOW) {
spin_lock_irq(&uport->lock);
if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
port->tty->hw_stopped = 1;
spin_unlock_irq(&uport->lock);
}

- state->flags |= UIF_INITIALIZED;
+ set_bit(ASYNCB_INITIALIZED, &port->flags);

clear_bit(TTY_IO_ERROR, &port->tty->flags);
}
@@ -214,7 +214,7 @@ static int uart_startup(struct uart_state *state, int init_hw)
*/
static void uart_shutdown(struct uart_state *state)
{
- struct uart_port *port = state->uart_port;
+ struct uart_port *uport = state->uart_port;
struct tty_struct *tty = state->port.tty;

/*
@@ -223,14 +223,12 @@ static void uart_shutdown(struct uart_state *state)
if (tty)
set_bit(TTY_IO_ERROR, &tty->flags);

- if (state->flags & UIF_INITIALIZED) {
- state->flags &= ~UIF_INITIALIZED;
-
+ if (test_and_clear_bit(ASYNCB_INITIALIZED, &state->port.flags)) {
/*
* Turn off DTR and RTS early.
*/
if (!tty || (tty->termios->c_cflag & HUPCL))
- uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+ uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);

/*
* clear delta_msr_wait queue to avoid mem leaks: we may free
@@ -244,12 +242,12 @@ static void uart_shutdown(struct uart_state *state)
/*
* Free the IRQ and disable the port.
*/
- port->ops->shutdown(port);
+ uport->ops->shutdown(uport);

/*
* Ensure that the IRQ handler isn't running on another CPU.
*/
- synchronize_irq(port->irq);
+ synchronize_irq(uport->irq);
}

/*
@@ -429,15 +427,16 @@ EXPORT_SYMBOL(uart_get_divisor);
static void
uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
{
- struct tty_struct *tty = state->port.tty;
- struct uart_port *port = state->uart_port;
+ struct tty_port *port = &state->port;
+ struct tty_struct *tty = port->tty;
+ struct uart_port *uport = state->uart_port;
struct ktermios *termios;

/*
* If we have no tty, termios, or the port does not exist,
* then we can't set the parameters for this port.
*/
- if (!tty || !tty->termios || port->type == PORT_UNKNOWN)
+ if (!tty || !tty->termios || uport->type == PORT_UNKNOWN)
return;

termios = tty->termios;
@@ -446,16 +445,16 @@ uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
* Set flags based on termios cflag
*/
if (termios->c_cflag & CRTSCTS)
- state->flags |= UIF_CTS_FLOW;
+ set_bit(ASYNCB_CTS_FLOW, &port->flags);
else
- state->flags &= ~UIF_CTS_FLOW;
+ clear_bit(ASYNCB_CTS_FLOW, &port->flags);

if (termios->c_cflag & CLOCAL)
- state->flags &= ~UIF_CHECK_CD;
+ clear_bit(ASYNCB_CHECK_CD, &port->flags);
else
- state->flags |= UIF_CHECK_CD;
+ set_bit(ASYNCB_CHECK_CD, &port->flags);

- port->ops->set_termios(port, termios, old_termios);
+ uport->ops->set_termios(uport, termios, old_termios);
}

static inline int
@@ -848,7 +847,7 @@ static int uart_set_info(struct uart_state *state,
retval = 0;
if (uport->type == PORT_UNKNOWN)
goto exit;
- if (state->flags & UIF_INITIALIZED) {
+ if (port->flags & ASYNC_INITIALIZED) {
if (((old_flags ^ uport->flags) & UPF_SPD_MASK) ||
old_custom_divisor != uport->custom_divisor) {
/*
@@ -1306,7 +1305,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
* At this point, we stop accepting input. To do this, we
* disable the receive line status interrupts.
*/
- if (state->flags & UIF_INITIALIZED) {
+ if (port->flags & ASYNC_INITIALIZED) {
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
uport->ops->stop_rx(uport);
@@ -1337,7 +1336,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
/*
* Wake up anyone trying to open this port.
*/
- state->flags &= ~UIF_NORMAL_ACTIVE;
+ clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
wake_up_interruptible(&port->open_wait);

done:
@@ -1418,11 +1417,11 @@ static void uart_hangup(struct tty_struct *tty)
pr_debug("uart_hangup(%d)\n", state->uart_port->line);

mutex_lock(&state->mutex);
- if (state->flags & UIF_NORMAL_ACTIVE) {
+ if (port->flags & ASYNC_NORMAL_ACTIVE) {
uart_flush_buffer(tty);
uart_shutdown(state);
port->count = 0;
- state->flags &= ~UIF_NORMAL_ACTIVE;
+ clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
port->tty = NULL;
wake_up_interruptible(&port->open_wait);
wake_up_interruptible(&state->delta_msr_wait);
@@ -1493,7 +1492,7 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
/*
* If the port has been closed, tell userspace/restart open.
*/
- if (!(state->flags & UIF_INITIALIZED))
+ if (!(port->flags & ASYNC_INITIALIZED))
break;

/*
@@ -1662,8 +1661,8 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
/*
* If this is the first open to succeed, adjust things to suit.
*/
- if (retval == 0 && !(state->flags & UIF_NORMAL_ACTIVE)) {
- state->flags |= UIF_NORMAL_ACTIVE;
+ if (retval == 0 && !(port->flags & ASYNC_NORMAL_ACTIVE)) {
+ set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);

uart_update_termios(state);
}
@@ -1985,63 +1984,64 @@ static int serial_match_port(struct device *dev, void *data)
return dev->devt == devt; /* Actually, only one tty per port */
}

-int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
+int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
{
- struct uart_state *state = drv->state + port->line;
+ struct uart_state *state = drv->state + uport->line;
+ struct tty_port *port = &state->port;
struct device *tty_dev;
- struct uart_match match = {port, drv};
+ struct uart_match match = {uport, drv};

mutex_lock(&state->mutex);

- if (!console_suspend_enabled && uart_console(port)) {
+ if (!console_suspend_enabled && uart_console(uport)) {
/* we're going to avoid suspending serial console */
mutex_unlock(&state->mutex);
return 0;
}

- tty_dev = device_find_child(port->dev, &match, serial_match_port);
+ tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (device_may_wakeup(tty_dev)) {
- enable_irq_wake(port->irq);
+ enable_irq_wake(uport->irq);
put_device(tty_dev);
mutex_unlock(&state->mutex);
return 0;
}
- port->suspended = 1;
+ uport->suspended = 1;

- if (state->flags & UIF_INITIALIZED) {
- const struct uart_ops *ops = port->ops;
+ if (port->flags & ASYNC_INITIALIZED) {
+ const struct uart_ops *ops = uport->ops;
int tries;

- state->flags = (state->flags & ~UIF_INITIALIZED)
- | UIF_SUSPENDED;
+ set_bit(ASYNCB_SUSPENDED, &port->flags);
+ clear_bit(ASYNCB_INITIALIZED, &port->flags);

- spin_lock_irq(&port->lock);
- ops->stop_tx(port);
- ops->set_mctrl(port, 0);
- ops->stop_rx(port);
- spin_unlock_irq(&port->lock);
+ spin_lock_irq(&uport->lock);
+ ops->stop_tx(uport);
+ ops->set_mctrl(uport, 0);
+ ops->stop_rx(uport);
+ spin_unlock_irq(&uport->lock);

/*
* Wait for the transmitter to empty.
*/
- for (tries = 3; !ops->tx_empty(port) && tries; tries--)
+ for (tries = 3; !ops->tx_empty(uport) && tries; tries--)
msleep(10);
if (!tries)
printk(KERN_ERR "%s%s%s%d: Unable to drain "
"transmitter\n",
- port->dev ? dev_name(port->dev) : "",
- port->dev ? ": " : "",
+ uport->dev ? dev_name(uport->dev) : "",
+ uport->dev ? ": " : "",
drv->dev_name,
- drv->tty_driver->name_base + port->line);
+ drv->tty_driver->name_base + uport->line);

- ops->shutdown(port);
+ ops->shutdown(uport);
}

/*
* Disable the console device before suspending.
*/
- if (uart_console(port))
- console_stop(port->cons);
+ if (uart_console(uport))
+ console_stop(uport->cons);

uart_change_pm(state, 3);

@@ -2050,67 +2050,68 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
return 0;
}

-int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
+int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
{
- struct uart_state *state = drv->state + port->line;
+ struct uart_state *state = drv->state + uport->line;
+ struct tty_port *port = &state->port;
struct device *tty_dev;
- struct uart_match match = {port, drv};
+ struct uart_match match = {uport, drv};

mutex_lock(&state->mutex);

- if (!console_suspend_enabled && uart_console(port)) {
+ if (!console_suspend_enabled && uart_console(uport)) {
/* no need to resume serial console, it wasn't suspended */
mutex_unlock(&state->mutex);
return 0;
}

- tty_dev = device_find_child(port->dev, &match, serial_match_port);
- if (!port->suspended && device_may_wakeup(tty_dev)) {
- disable_irq_wake(port->irq);
+ tty_dev = device_find_child(uport->dev, &match, serial_match_port);
+ if (!uport->suspended && device_may_wakeup(tty_dev)) {
+ disable_irq_wake(uport->irq);
mutex_unlock(&state->mutex);
return 0;
}
- port->suspended = 0;
+ uport->suspended = 0;

/*
* Re-enable the console device after suspending.
*/
- if (uart_console(port)) {
+ if (uart_console(uport)) {
struct ktermios termios;

/*
* First try to use the console cflag setting.
*/
memset(&termios, 0, sizeof(struct ktermios));
- termios.c_cflag = port->cons->cflag;
+ termios.c_cflag = uport->cons->cflag;

/*
* If that's unset, use the tty termios setting.
*/
- if (state->port.tty && termios.c_cflag == 0)
- termios = *state->port.tty->termios;
+ if (port->tty && termios.c_cflag == 0)
+ termios = *port->tty->termios;

uart_change_pm(state, 0);
- port->ops->set_termios(port, &termios, NULL);
- console_start(port->cons);
+ uport->ops->set_termios(uport, &termios, NULL);
+ console_start(uport->cons);
}

- if (state->flags & UIF_SUSPENDED) {
- const struct uart_ops *ops = port->ops;
+ if (port->flags & ASYNC_SUSPENDED) {
+ const struct uart_ops *ops = uport->ops;
int ret;

uart_change_pm(state, 0);
- spin_lock_irq(&port->lock);
- ops->set_mctrl(port, 0);
- spin_unlock_irq(&port->lock);
- ret = ops->startup(port);
+ spin_lock_irq(&uport->lock);
+ ops->set_mctrl(uport, 0);
+ spin_unlock_irq(&uport->lock);
+ ret = ops->startup(uport);
if (ret == 0) {
uart_change_speed(state, NULL);
- spin_lock_irq(&port->lock);
- ops->set_mctrl(port, port->mctrl);
- ops->start_tx(port);
- spin_unlock_irq(&port->lock);
- state->flags |= UIF_INITIALIZED;
+ spin_lock_irq(&uport->lock);
+ ops->set_mctrl(uport, uport->mctrl);
+ ops->start_tx(uport);
+ spin_unlock_irq(&uport->lock);
+ set_bit(ASYNCB_INITIALIZED, &port->flags);
} else {
/*
* Failed to resume - maybe hardware went away?
@@ -2120,7 +2121,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
uart_shutdown(state);
}

- state->flags &= ~UIF_SUSPENDED;
+ clear_bit(ASYNCB_SUSPENDED, &port->flags);
}

mutex_unlock(&state->mutex);
diff --git a/include/linux/serial.h b/include/linux/serial.h
index e5bb75a..c8613c3 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -122,6 +122,7 @@ struct serial_uart_config {

/* Internal flags used only by kernel */
#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
+#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */
#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */
#define ASYNCB_CLOSING 27 /* Serial port is closing */
@@ -133,6 +134,7 @@ struct serial_uart_config {
#define ASYNCB_FIRST_KERNEL 22

#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED)
#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT)
#define ASYNC_SAK (1U << ASYNCB_SAK)
#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 63ad909..284ef7f 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -20,6 +20,8 @@
#ifndef LINUX_SERIAL_CORE_H
#define LINUX_SERIAL_CORE_H

+#include <linux/serial.h>
+
/*
* The type definitions. These are from Ted Ts'o's serial.h
*/
@@ -356,19 +358,6 @@ struct uart_state {

int pm_state;
struct circ_buf xmit;
- uif_t flags;
-
-/*
- * Definitions for info->flags. These are _private_ to serial_core, and
- * are specific to this structure. They may be queried by low level drivers.
- *
- * FIXME: use the ASY_ definitions
- */
-#define UIF_CHECK_CD ((__force uif_t) (1 << 25))
-#define UIF_CTS_FLOW ((__force uif_t) (1 << 26))
-#define UIF_NORMAL_ACTIVE ((__force uif_t) (1 << 29))
-#define UIF_INITIALIZED ((__force uif_t) (1 << 31))
-#define UIF_SUSPENDED ((__force uif_t) (1 << 30))

struct tasklet_struct tlet;
wait_queue_head_t delta_msr_wait;
@@ -509,22 +498,23 @@ static inline int uart_handle_break(struct uart_port *port)
* @status: new carrier detect status, nonzero if active
*/
static inline void
-uart_handle_dcd_change(struct uart_port *port, unsigned int status)
+uart_handle_dcd_change(struct uart_port *uport, unsigned int status)
{
- struct uart_state *state = port->state;
+ struct uart_state *state = uport->state;
+ struct tty_port *port = &state->port;

- port->icount.dcd++;
+ uport->icount.dcd++;

#ifdef CONFIG_HARD_PPS
- if ((port->flags & UPF_HARDPPS_CD) && status)
+ if ((uport->flags & UPF_HARDPPS_CD) && status)
hardpps();
#endif

- if (state->flags & UIF_CHECK_CD) {
+ if (port->flags & ASYNC_CHECK_CD) {
if (status)
- wake_up_interruptible(&state->port.open_wait);
- else if (state->port.tty)
- tty_hangup(state->port.tty);
+ wake_up_interruptible(&port->open_wait);
+ else if (port->tty)
+ tty_hangup(port->tty);
}
}

@@ -534,24 +524,24 @@ uart_handle_dcd_change(struct uart_port *port, unsigned int status)
* @status: new clear to send status, nonzero if active
*/
static inline void
-uart_handle_cts_change(struct uart_port *port, unsigned int status)
+uart_handle_cts_change(struct uart_port *uport, unsigned int status)
{
- struct uart_state *state = port->state;
- struct tty_struct *tty = state->port.tty;
+ struct tty_port *port = &uport->state->port;
+ struct tty_struct *tty = port->tty;

- port->icount.cts++;
+ uport->icount.cts++;

- if (state->flags & UIF_CTS_FLOW) {
+ if (port->flags & ASYNC_CTS_FLOW) {
if (tty->hw_stopped) {
if (status) {
tty->hw_stopped = 0;
- port->ops->start_tx(port);
- uart_write_wakeup(port);
+ uport->ops->start_tx(uport);
+ uart_write_wakeup(uport);
}
} else {
if (!status) {
tty->hw_stopped = 1;
- port->ops->stop_tx(port);
+ uport->ops->stop_tx(uport);
}
}
}
--
1.6.4.2


\
 
 \ /
  Last update: 2009-09-20 00:15    [W:0.372 / U:0.488 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site