lkml.org 
[lkml]   [2009]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 27/79] serial: 8250: add IRQ trigger support
Date
From: Vikram Pandita <vikram.pandita@ti.com>

There is currently no provision for passing IRQ trigger flags for
serial IRQs with triggering requirements (such as GPIO IRQs)

This patch adds irqflags to plat_serial8250_port that can be passed
from board file to reqest_irq() of 8250 driver

Changes are backward compatible with boards passing UPF_SHARE_IRQ flag

Tested on Zoom2 board that has IRQF_TRIGGER_RISING requirement for 8250 irq

[Moved new flag to end to fix bugs in the original with the old_serial array
-- Alan]

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/8250.c | 14 +++++++++-----
drivers/serial/8250.h | 1 +
include/linux/serial_8250.h | 1 +
include/linux/serial_core.h | 1 +
4 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index fb867a9..83168a6 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1677,7 +1677,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
INIT_LIST_HEAD(&up->list);
i->head = &up->list;
spin_unlock_irq(&i->lock);
-
+ irq_flags |= up->port.irqflags;
ret = request_irq(up->port.irq, serial8250_interrupt,
irq_flags, "serial", i);
if (ret < 0)
@@ -2026,7 +2026,7 @@ static int serial8250_startup(struct uart_port *port)
* allow register changes to become visible.
*/
spin_lock_irqsave(&up->port.lock, flags);
- if (up->port.flags & UPF_SHARE_IRQ)
+ if (up->port.irqflags & IRQF_SHARED)
disable_irq_nosync(up->port.irq);

wait_for_xmitr(up, UART_LSR_THRE);
@@ -2039,7 +2039,7 @@ static int serial8250_startup(struct uart_port *port)
iir = serial_in(up, UART_IIR);
serial_out(up, UART_IER, 0);

- if (up->port.flags & UPF_SHARE_IRQ)
+ if (up->port.irqflags & IRQF_SHARED)
enable_irq(up->port.irq);
spin_unlock_irqrestore(&up->port.lock, flags);

@@ -2671,6 +2671,7 @@ static void __init serial8250_isa_init_ports(void)
i++, up++) {
up->port.iobase = old_serial_port[i].port;
up->port.irq = irq_canonicalize(old_serial_port[i].irq);
+ up->port.irqflags = old_serial_port[i].irqflags;
up->port.uartclk = old_serial_port[i].baud_base * 16;
up->port.flags = old_serial_port[i].flags;
up->port.hub6 = old_serial_port[i].hub6;
@@ -2679,7 +2680,7 @@ static void __init serial8250_isa_init_ports(void)
up->port.regshift = old_serial_port[i].iomem_reg_shift;
set_io_from_upio(&up->port);
if (share_irqs)
- up->port.flags |= UPF_SHARE_IRQ;
+ up->port.irqflags |= IRQF_SHARED;
}
}

@@ -2869,6 +2870,7 @@ int __init early_serial_setup(struct uart_port *port)
p->iobase = port->iobase;
p->membase = port->membase;
p->irq = port->irq;
+ p->irqflags = port->irqflags;
p->uartclk = port->uartclk;
p->fifosize = port->fifosize;
p->regshift = port->regshift;
@@ -2942,6 +2944,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
port.iobase = p->iobase;
port.membase = p->membase;
port.irq = p->irq;
+ port.irqflags = p->irqflags;
port.uartclk = p->uartclk;
port.regshift = p->regshift;
port.iotype = p->iotype;
@@ -2954,7 +2957,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
port.serial_out = p->serial_out;
port.dev = &dev->dev;
if (share_irqs)
- port.flags |= UPF_SHARE_IRQ;
+ port.irqflags |= IRQF_SHARED;
ret = serial8250_register_port(&port);
if (ret < 0) {
dev_err(&dev->dev, "unable to register port at index %d "
@@ -3096,6 +3099,7 @@ int serial8250_register_port(struct uart_port *port)
uart->port.iobase = port->iobase;
uart->port.membase = port->membase;
uart->port.irq = port->irq;
+ uart->port.irqflags = port->irqflags;
uart->port.uartclk = port->uartclk;
uart->port.fifosize = port->fifosize;
uart->port.regshift = port->regshift;
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index 5202603..6e19ea3 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -25,6 +25,7 @@ struct old_serial_port {
unsigned char io_type;
unsigned char *iomem_base;
unsigned short iomem_reg_shift;
+ unsigned long irqflags;
};

/*
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index d4d2a78..fb46aba 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -22,6 +22,7 @@ struct plat_serial8250_port {
void __iomem *membase; /* ioremap cookie or NULL */
resource_size_t mapbase; /* resource base */
unsigned int irq; /* interrupt number */
+ unsigned long irqflags; /* request_irq flags */
unsigned int uartclk; /* UART clock rate */
void *private_data;
unsigned char regshift; /* register shift */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 23d2fb0..3cd255f 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -265,6 +265,7 @@ struct uart_port {
unsigned int (*serial_in)(struct uart_port *, int);
void (*serial_out)(struct uart_port *, int, int);
unsigned int irq; /* irq number */
+ unsigned long irqflags; /* irq flags */
unsigned int uartclk; /* base uart clock */
unsigned int fifosize; /* tx fifo size */
unsigned char x_char; /* xon/xoff char */
--
1.6.4.2


\
 
 \ /
  Last update: 2009-09-19 23:49    [W:0.439 / U:0.148 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site