lkml.org 
[lkml]   [2009]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH ACS v3 1/1]
Date
This patch enables P2P upstream forwarding in ACS capable PCIe switches.
This solves two potential problems in virtualization environment where
a PCIe device is assigned to a guest domain using a HW iommu such as VT-d:

1) Unintentional failure caused by guest physical address programmed
into the device's DMA that happens to match the memory address range
of other downstream ports in the same PCIe switch. This causes the PCI
transaction to go to the matching downstream port instead of go to the
root complex to get translated by VT-d as it should be.

2) Malicious guest software intentionally attacks another downstream
PCIe device by programming the DMA address into the assigned device
that matches memory address range of the downstream PCIe port.

We are in process of implementing device filtering software in KVM/XEN
management software to allow device assignment of PCIe devices behind
a PCIe switch only if it has ACS capability and with the P2P upstream
forwarding bits enabled. This patch is intended to work for both KVM
and Xen environments.

Changes from initial to v1:
- removed #define ACS_ENABLE and dev_info() call
- changed ctrl value setting without using if-condition
- fixed ACS #defines in pci_regs.h

Changes from v2 to v3:
- change #define indention to 2 for PCI reg and 1 for bit
position

Signed-off-by: Allen Kay <allen.m.kay@intel.com>
Reviewed--by: Mathew Wilcox <willy@linux.intel.com>
---
drivers/pci/pci.c | 35 +++++++++++++++++++++++++++++++++++
drivers/pci/pci.h | 1 +
drivers/pci/probe.c | 3 +++
include/linux/pci_regs.h | 13 +++++++++++++
4 files changed, 52 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6edecff..1171c6d 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1533,6 +1533,41 @@ void pci_enable_ari(struct pci_dev *dev)
}

/**
+ * pci_acs_enable - enable ACS if hardware support it
+ * @dev: the PCI device
+ */
+void pci_acs_init(struct pci_dev *dev)
+{
+ int pos;
+ u16 cap;
+ u16 ctrl;
+
+ if (!dev->is_pcie)
+ return;
+
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS);
+ if (!pos)
+ return;
+
+ pci_read_config_word(dev, pos + PCI_ACS_CAP, &cap);
+ pci_read_config_word(dev, pos + PCI_ACS_CTRL, &ctrl);
+
+ /* Source Validation */
+ ctrl |= (cap & PCI_ACS_SV);
+
+ /* P2P Request Redirect */
+ ctrl |= (cap & PCI_ACS_RR);
+
+ /* P2P Completion Redirect */
+ ctrl |= (cap & PCI_ACS_CR);
+
+ /* Upstream Forwarding */
+ ctrl |= (cap & PCI_ACS_UF);
+
+ pci_write_config_word(dev, pos + PCI_ACS_CTRL, ctrl);
+}
+
+/**
* pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge
* @dev: the PCI device
* @pin: the INTx pin (1=INTA, 2=INTB, 3=INTD, 4=INTD)
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index d92d195..ec8e2c1 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -202,6 +202,7 @@ static inline int pci_ari_enabled(struct pci_bus *bus)
{
return bus->self && bus->self->ari_enabled;
}
+extern void pci_acs_init(struct pci_dev *dev);

#ifdef CONFIG_PCI_QUIRKS
extern int pci_is_reassigndev(struct pci_dev *dev);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 8105e32..72b9822 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1014,6 +1014,9 @@ static void pci_init_capabilities(struct pci_dev *dev)

/* Single Root I/O Virtualization */
pci_iov_init(dev);
+
+ /* Access Control Service */
+ pci_acs_init(dev);
}

void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index dd0bed4..d798770 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -502,6 +502,7 @@
#define PCI_EXT_CAP_ID_VC 2
#define PCI_EXT_CAP_ID_DSN 3
#define PCI_EXT_CAP_ID_PWR 4
+#define PCI_EXT_CAP_ID_ACS 13
#define PCI_EXT_CAP_ID_ARI 14
#define PCI_EXT_CAP_ID_ATS 15
#define PCI_EXT_CAP_ID_SRIOV 16
@@ -662,4 +663,16 @@
#define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */
#define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */

+/* Access Control Service */
+#define PCI_ACS_CAP 0x04 /* ACS Capability Register */
+#define PCI_ACS_SV 0x01 /* Source Validation */
+#define PCI_ACS_TB 0x02 /* Translation Blocking */
+#define PCI_ACS_RR 0x04 /* P2P Request Redirect */
+#define PCI_ACS_CR 0x08 /* P2P Completion Redirect */
+#define PCI_ACS_UF 0x10 /* Upstream Forwarding */
+#define PCI_ACS_EC 0x20 /* P2P Egress Control */
+#define PCI_ACS_DT 0x40 /* Direct Translated P2P */
+#define PCI_ACS_CTRL 0x06 /* ACS Control Register */
+#define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */
+
#endif /* LINUX_PCI_REGS_H */
--
1.6.0.6


\
 
 \ /
  Last update: 2009-09-18 01:53    [W:0.073 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site