lkml.org 
[lkml]   [2009]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
Subjectr8169 NETDEV WATCHDOG: eth0: transmit timed out [1/8]
From

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-15lenny3) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu May 28 21:28:49 UTC 2009
[ 0.000000] Command line: root=/dev/md2 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf78e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf78e000 - 00000000bf7d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 784256) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 3407872) 2 entries of 3200 used
[ 0.000000] max_pfn_mapped = 3407872
[ 0.000000] init_memory_mapping
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000FA1E0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT BF780000, 003C (r1 7522MS A7522700 20090218 MSFT 97)
[ 0.000000] ACPI: FACP BF780200, 0084 (r1 7522MS A7522700 20090218 MSFT 97)
[ 0.000000] ACPI: DSDT BF780460, 6B99 (r1 A7522 A7522700 700 INTL 20051117)
[ 0.000000] ACPI: FACS BF78E000, 0040
[ 0.000000] ACPI: APIC BF780390, 008C (r1 7522MS A7522700 20090218 MSFT 97)
[ 0.000000] ACPI: MCFG BF780420, 003C (r1 7522MS OEMMCFG 20090218 MSFT 97)
[ 0.000000] ACPI: OEMB BF78E040, 007A (r1 7522MS A7522700 20090218 MSFT 97)
[ 0.000000] ACPI: HPET BF78A460, 0038 (r1 7522MS OEMHPET 20090218 MSFT 97)
[ 0.000000] ACPI: SSDT BF7908F0, 1298 (r1 DpgPmm CpuPm 12 INTL 20051117)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000340000000
[ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 784256) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 3407872) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000340000000
[ 0.000000] NODE_DATA [0000000000016000 - 000000000001afff]
[ 0.000000] bootmap [000000000001b000 - 0000000000082fff] pages 68
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-673397] TEXT DATA BSS
[ 0.000000] early res: 3 [37880000-37fef6b3] RAMDISK
[ 0.000000] early res: 4 [9ec00-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-15fff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe20003bfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0
[ 0.000000] [ffffe20003c00000-ffffe2000b5fffff] PMD -> [ffff81000c000000-ffff8100139fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 3407872
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 158
[ 0.000000] 0: 256 -> 784256
[ 0.000000] 0: 1048576 -> 3407872
[ 0.000000] On node 0 totalpages: 3143454
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1255 pages reserved
[ 0.000000] DMA zone: 2687 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31
[ 0.000000] Normal zone: 32256 pages used for memmap
[ 0.000000] Normal zone: 2327040 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000
[ 0.000000] PM: Registered nosave memory: 00000000bf78e000 - 00000000bf7d0000
[ 0.000000] PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
[ 0.000000] PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ec000
[ 0.000000] PM: Registered nosave memory: 00000000bf7ec000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000)
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 8
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3095607
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/md2 ro
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] time.c: Detected 2673.299 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0x4000000 - 0x8000000
[ 0.004000] Memory: 12322944k/13631488k available (2225k kernel code, 250872k reserved, 1080k data, 392k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083986] Calibrating delay using timer specific routine.. 5350.50 BogoMIPS (lpj=10701004)
[ 0.084005] Security Framework initialized
[ 0.084005] SELinux: Disabled at boot.
[ 0.084005] Capability LSM initialized
[ 0.084005] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.086988] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.088005] Mount-cache hash table entries: 256
[ 0.088005] Initializing cgroup subsys ns
[ 0.088005] Initializing cgroup subsys cpuacct
[ 0.088005] Initializing cgroup subsys devices
[ 0.088005] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.088005] CPU: L2 cache: 256K
[ 0.088005] CPU: L3 cache: 8192K
[ 0.088005] CPU 0/0 -> Node 0
[ 0.088005] CPU: Physical Processor ID: 0
[ 0.088005] CPU: Processor Core ID: 0
[ 0.088005] MCE: warning: using only 9 banks
[ 0.088005] CPU0: Thermal monitoring enabled (TM1)
[ 0.088005] using mwait in idle threads.
[ 0.088005] ACPI: Core revision 20080321
[ 0.140008] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.140008] Using local APIC timer interrupts.
[ 0.144009] APIC timer calibration result 8354055
[ 0.144009] Detected 8.354 MHz APIC timer.
[ 0.144009] Booting processor 1/2 ip 6000
[ 0.152009] Initializing CPU#1
[ 0.152009] Calibrating delay using timer specific routine.. 5346.45 BogoMIPS (lpj=10692910)
[ 0.152009] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.152009] CPU: L2 cache: 256K
[ 0.152009] CPU: L3 cache: 8192K
[ 0.152009] CPU 1/2 -> Node 0
[ 0.152009] CPU: Physical Processor ID: 0
[ 0.152009] CPU: Processor Core ID: 1
[ 0.152009] MCE: warning: using only 9 banks
[ 0.152009] CPU1: Thermal monitoring enabled (TM1)
[ 0.232014] CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.232014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.236014] Booting processor 2/4 ip 6000
[ 0.244015] Initializing CPU#2
[ 0.244015] Calibrating delay using timer specific routine.. 5346.45 BogoMIPS (lpj=10692904)
[ 0.244015] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.244015] CPU: L2 cache: 256K
[ 0.244015] CPU: L3 cache: 8192K
[ 0.244015] CPU 2/4 -> Node 0
[ 0.244015] CPU: Physical Processor ID: 0
[ 0.244015] CPU: Processor Core ID: 2
[ 0.244015] MCE: warning: using only 9 banks
[ 0.244015] CPU2: Thermal monitoring enabled (TM1)
[ 0.327256] CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.327842] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.332020] Booting processor 3/6 ip 6000
[ 0.343838] Initializing CPU#3
[ 0.343838] Calibrating delay using timer specific routine.. 5346.45 BogoMIPS (lpj=10692907)
[ 0.343838] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.343838] CPU: L2 cache: 256K
[ 0.343838] CPU: L3 cache: 8192K
[ 0.343838] CPU 3/6 -> Node 0
[ 0.343838] CPU: Physical Processor ID: 0
[ 0.343838] CPU: Processor Core ID: 3
[ 0.343838] MCE: warning: using only 9 banks
[ 0.343838] CPU3: Thermal monitoring enabled (TM1)
[ 0.424298] CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.424883] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.429079] Booting processor 4/1 ip 6000
[ 0.440880] Initializing CPU#4
[ 0.440880] Calibrating delay using timer specific routine.. 5346.44 BogoMIPS (lpj=10692899)
[ 0.440880] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.440880] CPU: L2 cache: 256K
[ 0.440880] CPU: L3 cache: 8192K
[ 0.440880] CPU 4/1 -> Node 0
[ 0.440880] CPU: Physical Processor ID: 0
[ 0.440880] CPU: Processor Core ID: 0
[ 0.440880] MCE: warning: using only 9 banks
[ 0.440880] CPU4: Thermal monitoring enabled (TM1)
[ 0.521358] CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.521953] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.526100] Booting processor 5/3 ip 6000
[ 0.538053] Initializing CPU#5
[ 0.538053] Calibrating delay using timer specific routine.. 5346.45 BogoMIPS (lpj=10692917)
[ 0.538053] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.538053] CPU: L2 cache: 256K
[ 0.538053] CPU: L3 cache: 8192K
[ 0.538053] CPU 5/3 -> Node 0
[ 0.538053] CPU: Physical Processor ID: 0
[ 0.538053] CPU: Processor Core ID: 1
[ 0.538053] MCE: warning: using only 9 banks
[ 0.538053] CPU5: Thermal monitoring enabled (TM1)
[ 0.618559] CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.626051] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.630051] Booting processor 6/5 ip 6000
[ 0.642053] Initializing CPU#6
[ 0.642053] Calibrating delay using timer specific routine.. 5346.45 BogoMIPS (lpj=10692918)
[ 0.642053] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.642053] CPU: L2 cache: 256K
[ 0.642053] CPU: L3 cache: 8192K
[ 0.642053] CPU 6/5 -> Node 0
[ 0.642053] CPU: Physical Processor ID: 0
[ 0.642053] CPU: Processor Core ID: 2
[ 0.642053] MCE: warning: using only 9 banks
[ 0.642053] CPU6: Thermal monitoring enabled (TM1)
[ 0.719392] CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.719977] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.726051] Booting processor 7/7 ip 6000
[ 0.738050] Initializing CPU#7
[ 0.738050] Calibrating delay using timer specific routine.. 5346.46 BogoMIPS (lpj=10692927)
[ 0.738050] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.738050] CPU: L2 cache: 256K
[ 0.738050] CPU: L3 cache: 8192K
[ 0.738050] CPU 7/7 -> Node 0
[ 0.738050] CPU: Physical Processor ID: 0
[ 0.738050] CPU: Processor Core ID: 3
[ 0.738050] MCE: warning: using only 9 banks
[ 0.738050] CPU7: Thermal monitoring enabled (TM1)
[ 0.818509] CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.819094] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.823972] Brought up 8 CPUs
[ 0.823972] Total of 8 processors activated (42775.69 BogoMIPS).
[ 0.823972] CPU0 attaching sched-domain:
[ 0.823972] domain 0: span 0,4
[ 0.823972] groups: 0 4
[ 0.823972] domain 1: span 0-7
[ 0.823972] groups: 0,4 1,5 2,6 3,7
[ 0.823972] domain 2: span 0-7
[ 0.823972] groups: 0-7
[ 0.823972] CPU1 attaching sched-domain:
[ 0.823972] domain 0: span 1,5
[ 0.823972] groups: 1 5
[ 0.823972] domain 1: span 0-7
[ 0.823972] groups: 1,5 2,6 3,7 0,4
[ 0.823972] domain 2: span 0-7
[ 0.823972] groups: 0-7
[ 0.823972] CPU2 attaching sched-domain:
[ 0.823972] domain 0: span 2,6
[ 0.823972] groups: 2 6
[ 0.823972] domain 1: span 0-7
[ 0.823972] groups: 2,6 3,7 0,4 1,5
[ 0.823972] domain 2: span 0-7
[ 0.823972] groups: 0-7
[ 0.823972] CPU3 attaching sched-domain:
[ 0.823972] domain 0: span 3,7
[ 0.823972] groups: 3 7
[ 0.823972] domain 1: span 0-7
[ 0.823972] groups: 3,7 0,4 1,5 2,6
[ 0.823972] domain 2: span 0-7
[ 0.823972] groups: 0-7
[ 0.823972] CPU4 attaching sched-domain:
[ 0.823972] domain 0: span 0,4
[ 0.823972] groups: 4 0
[ 0.823972] domain 1: span 0-7
[ 0.823972] groups: 0,4 1,5 2,6 3,7
[ 0.823972] domain 2: span 0-7
[ 0.823972] groups: 0-7
[ 0.823972] CPU5 attaching sched-domain:
[ 0.823972] domain 0: span 1,5
[ 0.823972] groups: 5 1
[ 0.823972] domain 1: span 0-7
[ 0.823972] groups: 1,5 2,6 3,7 0,4
[ 0.823972] domain 2: span 0-7
[ 0.823972] groups: 0-7
[ 0.823972] CPU6 attaching sched-domain:
[ 0.823972] domain 0: span 2,6
[ 0.823972] groups: 6 2
[ 0.823972] domain 1: span 0-7
[ 0.823972] groups: 2,6 3,7 0,4 1,5
[ 0.823972] domain 2: span 0-7
[ 0.823972] groups: 0-7
[ 0.823972] CPU7 attaching sched-domain:
[ 0.823972] domain 0: span 3,7
[ 0.823972] groups: 7 3
[ 0.823972] domain 1: span 0-7
[ 0.823972] groups: 3,7 0,4 1,5 2,6
[ 0.823972] domain 2: span 0-7
[ 0.823972] groups: 0-7
[ 0.823972] net_namespace: 1224 bytes
[ 0.823972] Booting paravirtualized kernel on bare hardware
[ 0.823972] NET: Registered protocol family 16
[ 0.823972] ACPI: bus type pci registered
[ 0.823972] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.823972] PCI: Not using MMCONFIG.
[ 0.823972] PCI: Using configuration type 1 for base access
[ 0.823972] ACPI: EC: Look up EC in DSDT
[ 0.836597] ACPI: Interpreter enabled
[ 0.836644] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.836845] ACPI: Using IOAPIC for interrupt routing
[ 0.836938] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.838896] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.848744] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.859586] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.859586] PCI: Transparent bridge - 0000:00:1e.0
[ 0.859586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.859586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.859586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.859586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.859586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 0.859586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 0.859586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 0.867586] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.867586] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.867586] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.867586] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.867586] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.867586] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.867586] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.867586] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.867586] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - C6, should be C5 [20080321]
[ 0.869505] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.873369] pnp: PnP ACPI init
[ 0.873369] ACPI: bus type pnp registered
[ 0.873369] pnp 00:00: parse allocated resources
[ 0.873369] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.873369] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.873369] pnp 00:01: parse allocated resources
[ 0.873369] pnp 00:01: add mem 0xfbf00000-0xfbffffff flags 0x1
[ 0.873369] pnp 00:01: add mem 0xfc000000-0xfcffffff flags 0x1
[ 0.873369] pnp 00:01: add mem 0xfd000000-0xfdffffff flags 0x1
[ 0.873369] pnp 00:01: add mem 0xfe000000-0xfebfffff flags 0x1
[ 0.873369] pnp 00:01: add mem 0xfec8a000-0xfec8afff flags 0x1
[ 0.873369] pnp 00:01: add mem 0xfed10000-0xfed10fff flags 0x1
[ 0.873369] pnp 00:01: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.873369] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.873369] pnp 00:02: parse allocated resources
[ 0.873369] pnp 00:02: add dma 4 flags 0x4
[ 0.873369] pnp 00:02: add io 0x0-0xf flags 0x1
[ 0.873369] pnp 00:02: add io 0x81-0x83 flags 0x1
[ 0.873369] pnp 00:02: add io 0x87-0x87 flags 0x1
[ 0.873369] pnp 00:02: add io 0x89-0x8b flags 0x1
[ 0.873369] pnp 00:02: add io 0x8f-0x8f flags 0x1
[ 0.873369] pnp 00:02: add io 0xc0-0xdf flags 0x1
[ 0.873369] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.873369] pnp 00:03: parse allocated resources
[ 0.873369] pnp 00:03: add io 0x70-0x71 flags 0x1
[ 0.873369] pnp 00:03: add irq 8 flags 0x1
[ 0.873369] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.873369] pnp 00:04: parse allocated resources
[ 0.873369] pnp 00:04: add io 0x61-0x61 flags 0x1
[ 0.873369] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.873369] pnp 00:05: parse allocated resources
[ 0.873369] pnp 00:05: add io 0xf0-0xff flags 0x1
[ 0.873369] pnp 00:05: add irq 13 flags 0x1
[ 0.873369] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.873369] pnp 00:06: parse allocated resources
[ 0.873369] pnp 00:06: add io 0x3f8-0x3ff flags 0x1
[ 0.873369] pnp 00:06: add irq 4 flags 0x1
[ 0.873369] pnp 00:06: parse resource options
[ 0.873369] pnp 00:06: new independent option
[ 0.873369] pnp 00:06: new dependent option (priority 0x0)
[ 0.873369] pnp 00:06: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.873369] pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.873369] pnp 00:06: new dependent option (priority 0x1)
[ 0.873369] pnp 00:06: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.873369] pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.873369] pnp 00:06: new dependent option (priority 0x1)
[ 0.873369] pnp 00:06: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.873369] pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.873369] pnp 00:06: new dependent option (priority 0x1)
[ 0.873369] pnp 00:06: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.873369] pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.873369] pnp 00:06: new dependent option (priority 0x1)
[ 0.873369] pnp 00:06: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.873369] pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
[ 0.873369] pnp 00:06: end dependent options
[ 0.873369] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.873369] pnp 00:07: parse allocated resources
[ 0.873369] pnp 00:07: add io 0x60-0x60 flags 0x1
[ 0.873369] pnp 00:07: add io 0x64-0x64 flags 0x1
[ 0.873369] pnp 00:07: add irq 1 flags 0x1
[ 0.873369] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.873369] pnp 00:08: parse allocated resources
[ 0.873369] pnp 00:08: add io 0x0-0xffffffffffffffff flags 0x10000001
[ 0.873369] pnp 00:08: add io 0xa00-0xadf flags 0x1
[ 0.873369] pnp 00:08: add io 0xae0-0xaef flags 0x1
[ 0.873369] pnp 00:08: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.873369] pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.873369] pnp 00:09: parse allocated resources
[ 0.873369] pnp 00:09: add io 0x10-0x1f flags 0x1
[ 0.873369] pnp 00:09: add io 0x22-0x2d flags 0x1
[ 0.873369] pnp 00:09: add io 0x30-0x3f flags 0x1
[ 0.873369] pnp 00:09: add io 0x44-0x5f flags 0x1
[ 0.873369] pnp 00:09: add io 0x62-0x63 flags 0x1
[ 0.873369] pnp 00:09: add io 0x65-0x6f flags 0x1
[ 0.873369] pnp 00:09: add io 0x72-0x7f flags 0x1
[ 0.873369] pnp 00:09: add io 0x80-0x80 flags 0x1
[ 0.873369] pnp 00:09: add io 0x84-0x86 flags 0x1
[ 0.873369] pnp 00:09: add io 0x88-0x88 flags 0x1
[ 0.873369] pnp 00:09: add io 0x8c-0x8e flags 0x1
[ 0.873369] pnp 00:09: add io 0x90-0x9f flags 0x1
[ 0.873369] pnp 00:09: add io 0xa2-0xbf flags 0x1
[ 0.873369] pnp 00:09: add io 0xe0-0xef flags 0x1
[ 0.873369] pnp 00:09: add io 0x4d0-0x4d1 flags 0x1
[ 0.873369] pnp 00:09: add io 0x800-0x87f flags 0x1
[ 0.873369] pnp 00:09: add io 0x0-0xffffffffffffffff flags 0x10000001
[ 0.873369] pnp 00:09: add io 0x500-0x57f flags 0x1
[ 0.873369] pnp 00:09: add mem 0xfed1c000-0xfed1ffff flags 0x1
[ 0.873369] pnp 00:09: add mem 0xfed10000-0xfed103ff flags 0x1
[ 0.873369] pnp 00:09: add mem 0xfed10400-0xfed107ff flags 0x1
[ 0.873369] pnp 00:09: add mem 0xfed10800-0xfed10bff flags 0x1
[ 0.873369] pnp 00:09: add mem 0xfed10c00-0xfed10fff flags 0x1
[ 0.873369] pnp 00:09: add mem 0xfec8a000-0xfec8a3ff flags 0x1
[ 0.873369] pnp 00:09: add mem 0xfec8a400-0xfec8a7ff flags 0x1
[ 0.873369] pnp 00:09: add mem 0xfec8a800-0xfec8abff flags 0x1
[ 0.873369] pnp 00:09: add mem 0xfec8ac00-0xfec8afff flags 0x1
[ 0.873369] pnp 00:09: add mem 0xfed20000-0xfed3ffff flags 0x1
[ 0.873369] pnp 00:09: add mem 0xfed45000-0xfed89fff flags 0x1
[ 0.873369] pnp 00:09: add mem 0xfed20000-0xfed3ffff flags 0x1
[ 0.873369] pnp 00:09: add mem 0xfed40000-0xfed8ffff flags 0x1
[ 0.873369] pnp 00:09: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.873369] pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.873369] pnp 00:0a: parse allocated resources
[ 0.873369] pnp 00:0a: add mem 0xfed00000-0xfed003ff flags 0x0
[ 0.873369] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.873369] pnp 00:0b: parse allocated resources
[ 0.873369] pnp 00:0b: add mem 0xfec00000-0xfec00fff flags 0x0
[ 0.873369] pnp 00:0b: add mem 0xfee00000-0xfee00fff flags 0x0
[ 0.873369] pnp 00:0b: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.873369] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.873369] pnp 00:0c: parse allocated resources
[ 0.873369] pnp 00:0c: add mem 0xe0000000-0xefffffff flags 0x0
[ 0.873369] pnp 00:0c: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.873369] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.873369] pnp 00:0d: parse allocated resources
[ 0.873369] pnp 00:0d: add mem 0x0-0x9ffff flags 0x1
[ 0.873369] pnp 00:0d: add mem 0xc0000-0xcffff flags 0x0
[ 0.873369] pnp 00:0d: add mem 0xe0000-0xfffff flags 0x0
[ 0.873369] pnp 00:0d: add mem 0x100000-0xbfffffff flags 0x1
[ 0.873369] pnp 00:0d: add mem 0xfed90000-0xffffffff flags 0x0
[ 0.873369] pnp 00:0d: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.873369] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.873369] pnp: PnP ACPI: found 14 devices
[ 0.873369] ACPI: ACPI bus type pnp unregistered
[ 0.873369] usbcore: registered new interface driver usbfs
[ 0.873369] usbcore: registered new interface driver hub
[ 0.873369] usbcore: registered new device driver usb
[ 0.873369] PCI: Using ACPI for IRQ routing
[ 0.892990] PCI-GART: No AMD northbridge found.
[ 0.893044] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.893240] hpet0: 4 64-bit timers, 14318180 Hz
[ 0.895069] ACPI: RTC can wake from S4
[ 0.897727] Switched to high resolution mode on CPU 0
[ 0.899069] Switched to high resolution mode on CPU 7
[ 0.897730] Switched to high resolution mode on CPU 3
[ 0.899075] Switched to high resolution mode on CPU 6
[ 0.899072] Switched to high resolution mode on CPU 2
[ 0.899073] Switched to high resolution mode on CPU 1
[ 0.899072] Switched to high resolution mode on CPU 4
[ 0.900976] Switched to high resolution mode on CPU 5
[ 0.909698] pnp: the driver 'system' has been registered
[ 0.909709] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
[ 0.909765] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[ 0.909820] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[ 0.909871] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[ 0.909922] system 00:01: iomem range 0xfec8a000-0xfec8afff has been reserved
[ 0.909973] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
[ 0.910023] system 00:01: driver attached
[ 0.910029] system 00:08: ioport range 0xa00-0xadf has been reserved
[ 0.910078] system 00:08: ioport range 0xae0-0xaef has been reserved
[ 0.910128] system 00:08: driver attached
[ 0.910131] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.910181] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.910230] system 00:09: ioport range 0x500-0x57f has been reserved
[ 0.910280] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.910331] system 00:09: iomem range 0xfed10000-0xfed103ff has been reserved
[ 0.910382] system 00:09: iomem range 0xfed10400-0xfed107ff has been reserved
[ 0.910433] system 00:09: iomem range 0xfed10800-0xfed10bff has been reserved
[ 0.910484] system 00:09: iomem range 0xfed10c00-0xfed10fff has been reserved
[ 0.910535] system 00:09: iomem range 0xfec8a000-0xfec8a3ff has been reserved
[ 0.910586] system 00:09: iomem range 0xfec8a400-0xfec8a7ff has been reserved
[ 0.910637] system 00:09: iomem range 0xfec8a800-0xfec8abff has been reserved
[ 0.910687] system 00:09: iomem range 0xfec8ac00-0xfec8afff has been reserved
[ 0.910738] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.910789] system 00:09: iomem range 0xfed45000-0xfed89fff has been reserved
[ 0.910840] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.910891] system 00:09: iomem range 0xfed40000-0xfed8ffff could not be reserved
[ 0.910953] system 00:09: driver attached
[ 0.910956] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.911007] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.911069] system 00:0b: driver attached
[ 0.911072] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.911122] system 00:0c: driver attached
[ 0.911126] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.911176] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
[ 0.911229] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.912426] system 00:0d: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.912488] system 00:0d: iomem range 0xfed90000-0xffffffff could not be reserved
[ 0.912550] system 00:0d: driver attached
[ 0.914299] PCI: Bridge: 0000:00:01.0
[ 0.914299] IO window: disabled.
[ 0.914299] MEM window: disabled.
[ 0.914299] PREFETCH window: disabled.
[ 0.914299] PCI: Bridge: 0000:00:03.0
[ 0.914299] IO window: disabled.
[ 0.914299] MEM window: 0xf9000000-0xfbcfffff
[ 0.914299] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 0.914299] PCI: Bridge: 0000:00:07.0
[ 0.914299] IO window: disabled.
[ 0.914299] MEM window: disabled.
[ 0.914299] PREFETCH window: disabled.
[ 0.914299] PCI: Bridge: 0000:00:1c.0
[ 0.914299] IO window: disabled.
[ 0.914299] MEM window: disabled.
[ 0.914299] PREFETCH window: disabled.
[ 0.914299] PCI: Bridge: 0000:00:1c.4
[ 0.914299] IO window: e000-efff
[ 0.914299] MEM window: 0xfbe00000-0xfbefffff
[ 0.914299] PREFETCH window: 0x00000000f7f00000-0x00000000f7ffffff
[ 0.914299] PCI: Bridge: 0000:00:1e.0
[ 0.914299] IO window: disabled.
[ 0.914299] MEM window: disabled.
[ 0.914299] PREFETCH window: disabled.
[ 0.914299] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.914299] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 0.914299] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 0.914299] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.914299] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.914299] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.914299] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.914299] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.914299] NET: Registered protocol family 2
[ 0.951738] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.952728] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.955428] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.955612] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.955662] TCP reno registered
[ 0.968992] NET: Registered protocol family 1
[ 0.969097] checking if image is initramfs... it is
[ 1.437895] Freeing initrd memory: 7613k freed
[ 1.439561] audit: initializing netlink socket (disabled)
[ 1.439561] type=2000 audit(1247496789.416:1): initialized
[ 1.439561] Total HugeTLB memory allocated, 0
[ 1.439561] VFS: Disk quotas dquot_6.5.1
[ 1.439561] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.439561] msgmni has been set to 24083
[ 1.439561] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.439561] io scheduler noop registered
[ 1.439561] io scheduler anticipatory registered
[ 1.439561] io scheduler deadline registered
[ 1.439561] io scheduler cfq registered (default)
[ 1.439561] pci 0000:02:00.0: Boot video device
[ 1.439561] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 1.439561] assign_interrupt_mode Found MSI capability
[ 1.439561] Allocate Port Service[0000:00:01.0:pcie00]
[ 1.439561] Allocate Port Service[0000:00:01.0:pcie01]
[ 1.439561] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 1.439561] assign_interrupt_mode Found MSI capability
[ 1.439561] Allocate Port Service[0000:00:03.0:pcie00]
[ 1.439561] Allocate Port Service[0000:00:03.0:pcie01]
[ 1.439561] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 1.439561] assign_interrupt_mode Found MSI capability
[ 1.439561] Allocate Port Service[0000:00:07.0:pcie00]
[ 1.439561] Allocate Port Service[0000:00:07.0:pcie01]
[ 1.439561] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.439561] assign_interrupt_mode Found MSI capability
[ 1.439561] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.439561] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.439561] Allocate Port Service[0000:00:1c.0:pcie03]
[ 1.439561] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 1.439561] assign_interrupt_mode Found MSI capability
[ 1.445295] Allocate Port Service[0000:00:1c.4:pcie00]
[ 1.449279] Allocate Port Service[0000:00:1c.4:pcie02]
[ 1.449279] Allocate Port Service[0000:00:1c.4:pcie03]
[ 1.449279] AER service couldn't init device 0000:00:01.0:pcie01 - no _OSC support
[ 1.449279] AER service couldn't init device 0000:00:03.0:pcie01 - no _OSC support
[ 1.449279] AER service couldn't init device 0000:00:07.0:pcie01 - no _OSC support
[ 1.449279] hpet_resources: 0xfed00000 is busy
[ 1.449279] Linux agpgart interface v0.103
[ 1.449279] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.449279] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.449279] pnp: the driver 'serial' has been registered
[ 1.449279] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.449338] serial 00:06: driver attached
[ 1.449338] brd: module loaded
[ 1.469916] input: Macintosh mouse button emulation as /class/input/input0
[ 1.469916] pnp: the driver 'i8042 kbd' has been registered
[ 1.469916] i8042 kbd 00:07: driver attached
[ 1.469916] pnp: the driver 'i8042 aux' has been registered
[ 1.469916] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.469916] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.469916] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.488893] mice: PS/2 mouse device common for all mice
[ 1.488893] pnp: the driver 'rtc_cmos' has been registered
[ 1.488893] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.488893] rtc0: alarms up to one month, y3k
[ 1.488893] rtc_cmos 00:03: driver attached
[ 1.488893] cpuidle: using governor ladder
[ 1.488893] cpuidle: using governor menu
[ 1.488893] No iBFT detected.
[ 1.488893] TCP cubic registered
[ 1.488893] NET: Registered protocol family 17
[ 1.488894] registered taskstats version 1
[ 1.488894] rtc_cmos 00:03: setting system clock to 2009-07-13 14:53:10 UTC (1247496790)
[ 1.488894] Freeing unused kernel memory: 392k freed
[ 1.539300] SCSI subsystem initialized
[ 1.539300] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 1.539300] 3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
[ 1.547119] Uniform Multi-Platform E-IDE driver
[ 1.547119] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.554572] No dock devices found.
[ 1.555300] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.558596] libata version 3.00 loaded.
[ 1.563695] ahci 0000:00:1f.2: version 3.0
[ 1.563695] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 2.997790] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.997862] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
[ 2.997926] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.001758] scsi0 : ahci
[ 3.001758] scsi1 : ahci
[ 3.001758] scsi2 : ahci
[ 3.001758] scsi3 : ahci
[ 3.001758] scsi4 : ahci
[ 3.001758] scsi5 : ahci
[ 3.001758] ata1: SATA max UDMA/133 abar m2048@0xf8ffa000 port 0xf8ffa100 irq 1274
[ 3.001758] ata2: SATA max UDMA/133 abar m2048@0xf8ffa000 port 0xf8ffa180 irq 1274
[ 3.001758] ata3: SATA max UDMA/133 abar m2048@0xf8ffa000 port 0xf8ffa200 irq 1274
[ 3.001762] ata4: SATA max UDMA/133 abar m2048@0xf8ffa000 port 0xf8ffa280 irq 1274
[ 3.001825] ata5: SATA max UDMA/133 abar m2048@0xf8ffa000 port 0xf8ffa300 irq 1274
[ 3.001887] ata6: SATA max UDMA/133 abar m2048@0xf8ffa000 port 0xf8ffa380 irq 1274
[ 3.411097] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.415127] ata1.00: HPA detected: current 2930277168, native 18446744072344861488
[ 3.415127] ata1.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 3.415127] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.415127] ata1.00: configured for UDMA/133
[ 3.813850] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.813837] ata2.00: HPA detected: current 2930277168, native 18446744072344861488
[ 3.813837] ata2.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 3.813837] ata2.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.813837] ata2.00: configured for UDMA/133
[ 4.217849] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.557793] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.892559] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.229793] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.245770] scsi 0:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 5.245770] scsi 1:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 6.741744] md: raid0 personality registered for level 0
[ 6.741744] md: raid1 personality registered for level 1
[ 6.749724] xor: automatically using best checksumming function: generic_sse
[ 6.774406] generic_sse: 11779.000 MB/sec
[ 6.774406] xor: using function: generic_sse (11779.000 MB/sec)
[ 6.774406] async_tx: api initialized (async)
[ 6.846405] raid6: int64x1 2907 MB/s
[ 6.918931] raid6: int64x2 3562 MB/s
[ 6.986931] raid6: int64x4 3431 MB/s
[ 7.054931] raid6: int64x8 2066 MB/s
[ 7.122931] raid6: sse2x1 6634 MB/s
[ 7.190932] raid6: sse2x2 7781 MB/s
[ 7.258932] raid6: sse2x4 8727 MB/s
[ 7.258932] raid6: using algorithm sse2x4 (8727 MB/s)
[ 7.258932] md: raid6 personality registered for level 6
[ 7.258932] md: raid5 personality registered for level 5
[ 7.258932] md: raid4 personality registered for level 4
[ 7.262932] ACPI: SSDT BF78E0C0, 0403 (r1 DpgPmm P001Ist 11 INTL 20051117)
[ 7.262932] ACPI: SSDT BF790140, 03B2 (r1 PmRef P001Cst 3001 INTL 20051117)
[ 7.394922] Monitor-Mwait will be used to enter C-1 state
[ 7.394922] Monitor-Mwait will be used to enter C-2 state
[ 7.394922] Monitor-Mwait will be used to enter C-3 state
[ 7.394922] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 7.394922] ACPI: ACPI0007:00 is registered as cooling_device0
[ 7.394922] ACPI: SSDT BF78E4D0, 0403 (r1 DpgPmm P002Ist 12 INTL 20051117)
[ 7.394922] ACPI: SSDT BF790500, 0085 (r1 PmRef P002Cst 3000 INTL 20051117)
[ 7.394922] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 7.394922] ACPI: ACPI0007:01 is registered as cooling_device1
[ 7.394922] ACPI: SSDT BF78E8E0, 0403 (r1 DpgPmm P003Ist 12 INTL 20051117)
[ 7.394922] ACPI: SSDT BF790590, 0085 (r1 PmRef P003Cst 3000 INTL 20051117)
[ 7.394922] Marking TSC unstable due to TSC halts in idle
[ 7.262932] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
[ 7.262933] ACPI: ACPI0007:02 is registered as cooling_device2
[ 7.396196] ACPI: SSDT BF78ECF0, 0403 (r1 DpgPmm P004Ist 12 INTL 20051117)
[ 7.396550] ACPI: SSDT BF790620, 0085 (r1 PmRef P004Cst 3000 INTL 20051117)
[ 7.400196] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
[ 7.400196] ACPI: ACPI0007:03 is registered as cooling_device3
[ 7.400196] ACPI: SSDT BF78F100, 0403 (r1 DpgPmm P005Ist 12 INTL 20051117)
[ 7.400196] ACPI: SSDT BF7906B0, 0085 (r1 PmRef P005Cst 3000 INTL 20051117)
[ 7.400197] ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3])
[ 7.400197] ACPI: ACPI0007:04 is registered as cooling_device4
[ 7.400197] ACPI: SSDT BF78F510, 0403 (r1 DpgPmm P006Ist 12 INTL 20051117)
[ 7.400197] ACPI: SSDT BF790740, 0085 (r1 PmRef P006Cst 3000 INTL 20051117)
[ 7.443380] ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3])
[ 7.443380] ACPI: ACPI0007:05 is registered as cooling_device5
[ 7.443380] ACPI: SSDT BF78F920, 0403 (r1 DpgPmm P007Ist 12 INTL 20051117)
[ 7.443692] ACPI: SSDT BF7907D0, 0085 (r1 PmRef P007Cst 3000 INTL 20051117)
[ 7.444443] ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3])
[ 7.444444] ACPI: ACPI0007:06 is registered as cooling_device6
[ 7.444444] ACPI: SSDT BF78FD30, 0403 (r1 DpgPmm P008Ist 12 INTL 20051117)
[ 7.444444] ACPI: SSDT BF790860, 0085 (r1 PmRef P008Cst 3000 INTL 20051117)
[ 7.447691] ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3])
[ 7.447691] ACPI: ACPI0007:07 is registered as cooling_device7
[ 7.552518] Driver 'sd' needs updating - please use bus_type methods
[ 7.552536] sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors (1500302 MB)
[ 7.554182] sd 0:0:0:0: [sda] Write Protect is off
[ 7.554182] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.554192] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.554200] sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors (1500302 MB)
[ 7.556311] sd 0:0:0:0: [sda] Write Protect is off
[ 7.556311] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.556321] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.556321] sda: sda1 sda2 sda3
[ 7.559207] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.559217] sd 1:0:0:0: [sdb] 2930277168 512-byte hardware sectors (1500302 MB)
[ 7.562750] sd 1:0:0:0: [sdb] Write Protect is off
[ 7.562750] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 7.562760] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.562770] sd 1:0:0:0: [sdb] 2930277168 512-byte hardware sectors (1500302 MB)
[ 7.562750] sd 1:0:0:0: [sdb] Write Protect is off
[ 7.562750] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 7.562759] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.562759] sdb: sdb1 sdb2 sdb3
[ 7.592648] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 7.623759] USB Universal Host Controller Interface driver v3.0
[ 7.623759] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 7.623759] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 7.623759] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 7.623759] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 7.623759] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000cc00
[ 7.623812] usb usb1: configuration #1 chosen from 1 choice
[ 7.623877] hub 1-0:1.0: USB hub found
[ 7.623925] hub 1-0:1.0: 2 ports detected
[ 7.753248] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.753248] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.753248] usb usb1: Product: UHCI Host Controller
[ 7.753248] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 7.753248] usb usb1: SerialNumber: 0000:00:1a.0
[ 7.761170] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 7.761274] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 7.761278] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 7.761421] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 7.764845] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
[ 7.764845] usb usb2: configuration #1 chosen from 1 choice
[ 7.764845] hub 2-0:1.0: USB hub found
[ 7.764845] hub 2-0:1.0: 2 ports detected
[ 7.869128] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.869128] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.869128] usb usb2: Product: UHCI Host Controller
[ 7.869128] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 7.869128] usb usb2: SerialNumber: 0000:00:1a.1
[ 7.920642] ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19
[ 7.920642] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 7.920642] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 7.920642] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 7.920642] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c800
[ 7.920642] usb usb3: configuration #1 chosen from 1 choice
[ 7.920642] hub 3-0:1.0: USB hub found
[ 7.920642] hub 3-0:1.0: 2 ports detected
[ 8.030567] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.030567] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.030567] usb usb3: Product: UHCI Host Controller
[ 8.030567] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 8.030567] usb usb3: SerialNumber: 0000:00:1a.2
[ 8.069114] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 8.069114] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 8.069114] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 8.069114] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 8.069114] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[ 8.069114] usb usb4: configuration #1 chosen from 1 choice
[ 8.069114] hub 4-0:1.0: USB hub found
[ 8.069114] hub 4-0:1.0: 2 ports detected
[ 8.168894] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.168894] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.168894] usb usb4: Product: UHCI Host Controller
[ 8.168894] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 8.168894] usb usb4: SerialNumber: 0000:00:1d.0
[ 8.194176] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 8.194176] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 8.194176] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 8.194176] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 8.194176] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
[ 8.194176] usb usb5: configuration #1 chosen from 1 choice
[ 8.194176] hub 5-0:1.0: USB hub found
[ 8.194176] hub 5-0:1.0: 2 ports detected
[ 8.297002] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.297002] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.297002] usb usb5: Product: UHCI Host Controller
[ 8.297002] usb usb5: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 8.297002] usb usb5: SerialNumber: 0000:00:1d.1
[ 8.351674] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 8.351674] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 8.351674] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 8.351674] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 8.351674] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c080
[ 8.351674] usb usb6: configuration #1 chosen from 1 choice
[ 8.351674] hub 6-0:1.0: USB hub found
[ 8.351674] hub 6-0:1.0: 2 ports detected
[ 8.454233] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.454233] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.454233] usb usb6: Product: UHCI Host Controller
[ 8.454233] usb usb6: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 8.454233] usb usb6: SerialNumber: 0000:00:1d.2
[ 8.454233] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 8.454233] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 8.454233] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 8.454233] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 8.454233] ehci_hcd 0000:00:1a.7: debug port 1
[ 8.454233] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 8.454233] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8ffe000
[ 8.473771] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 8.473771] usb usb7: configuration #1 chosen from 1 choice
[ 8.473771] hub 7-0:1.0: USB hub found
[ 8.473771] hub 7-0:1.0: 6 ports detected
[ 8.576714] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.576714] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.576714] usb usb7: Product: EHCI Host Controller
[ 8.576714] usb usb7: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[ 8.576714] usb usb7: SerialNumber: 0000:00:1a.7
[ 8.841258] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 8.841258] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 8.841258] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 8.841258] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 8.841258] ehci_hcd 0000:00:1d.7: debug port 1
[ 8.841258] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 8.841258] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8ffc000
[ 8.860510] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 8.860510] usb usb8: configuration #1 chosen from 1 choice
[ 8.860510] hub 8-0:1.0: USB hub found
[ 8.860510] hub 8-0:1.0: 6 ports detected
[ 8.959966] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.959966] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.959966] usb usb8: Product: EHCI Host Controller
[ 8.959966] usb usb8: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[ 8.959966] usb usb8: SerialNumber: 0000:00:1d.7
[ 8.960713] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 8.960713] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 8.960713] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 8.960713] eth0: RTL8168c/8111c at 0xffffc20001860000, 00:24:21:29:ea:cd, XID 3c4000c0 IRQ 1273
[ 9.028423] md: md0 stopped.
[ 9.034124] md: bind<sdb1>
[ 9.034439] md: bind<sda1>
[ 9.034439] md: md0: raid array is not clean -- starting background reconstruction
[ 9.040541] raid1: raid set md0 active with 2 out of 2 mirrors
[ 9.040541] md: md1 stopped.
[ 9.044353] md: bind<sdb2>
[ 9.044760] md: bind<sda2>
[ 9.044760] md: md1: raid array is not clean -- starting background reconstruction
[ 9.051885] raid1: raid set md1 active with 2 out of 2 mirrors
[ 9.051885] md: md2 stopped.
[ 9.058303] md: bind<sdb3>
[ 9.058473] md: bind<sda3>
[ 9.058473] md: md2: raid array is not clean -- starting background reconstruction
[ 9.063747] raid1: raid set md2 active with 2 out of 2 mirrors
[ 9.135597] device-mapper: uevent: version 1.0.3
[ 9.135597] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 9.146808] PM: Starting manual resume from disk
[ 9.236684] kjournald starting. Commit interval 5 seconds
[ 9.236684] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.350616] udevd version 125 started
[ 10.619383] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
[ 10.903218] input: Power Button (FF) as /class/input/input2
[ 10.939676] ACPI: Power Button (FF) [PWRF]
[ 10.939802] input: Power Button (CM) as /class/input/input3
[ 10.972305] ACPI: Power Button (CM) [PWRB]
[ 11.001183] input: PC Speaker as /class/input/input4
[ 11.013070] Error: Driver 'pcspkr' is already registered, aborting...
[ 12.779671] Adding 4200888k swap on /dev/md0. Priority:-1 extents:1 across:4200888k
[ 12.817916] md: resync of RAID array md2
[ 12.817916] EXT3 FS on md2, internal journal
[ 12.817916] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 12.817916] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 12.817916] md: using 128k window, over a total of 1458830400 blocks.
[ 14.020445] loop: module loaded
[ 14.468477] kjournald starting. Commit interval 5 seconds
[ 14.478504] md: delaying resync of md1 until md2 has finished (they share one or more physical units)
[ 14.479257] EXT3 FS on md1, internal journal
[ 14.479257] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.712069] r8169: eth0: link up
[ 14.712069] r8169: eth0: link up
[ 15.076001] NET: Registered protocol family 10
[ 15.076001] lo: Disabled Privacy Extensions
\
 
 \ /
  Last update: 2009-08-29 11:21    [from the cache]
©2003-2011 Jasper Spaans