lkml.org 
[lkml]   [2009]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7 updated] PM: Add a switch for disabling/enabling asynchronous suspend/resume
Date
On Thursday 27 August 2009, Dmitry Torokhov wrote:
> On Thu, Aug 27, 2009 at 09:19:46PM +0200, Rafael J. Wysocki wrote:
> > From: Rafael J. Wysocki <rjw@sisk.pl>
> >
> > Add sysfs attribute kernel/power/pm_async allowing the user space to
> > disable and enable async suspend/resume of devices.
> >
> > Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
> > ---
> > drivers/base/power/main.c | 13 +++++++------
> > drivers/base/power/power.h | 6 +++---
> > kernel/power/main.c | 28 +++++++++++++++++++++++++++-
> > 3 files changed, 37 insertions(+), 10 deletions(-)
> >
> > Index: linux-2.6/kernel/power/main.c
> > ===================================================================
> > --- linux-2.6.orig/kernel/power/main.c
> > +++ linux-2.6/kernel/power/main.c
> > @@ -44,6 +44,29 @@ int pm_notifier_call_chain(unsigned long
> > == NOTIFY_BAD) ? -EINVAL : 0;
> > }
> >
> > +/* If set, devices may be suspended and resumed asynchronously. */
> > +int pm_async_enabled = 1;
> > +
> > +static ssize_t pm_async_show(struct kobject *kobj, struct kobj_attribute *attr,
> > + char *buf)
> > +{
> > + return sprintf(buf, "%d\n", pm_async_enabled);
> > +}
> > +
> > +static ssize_t pm_async_store(struct kobject *kobj, struct kobj_attribute *attr,
> > + const char *buf, size_t n)
> > +{
> > + int val;
> > +
> > + if (sscanf(buf, "%d", &val) == 1) {
>
> I prefer more vigorous restrictions on the sysfs interfaces. Maybe:
>
> if (strict_strtoul(buf, 10, &val) || val > 1)
> return -EINVAL;
>
> pm_async_enabled = val;
>
> ?

OK

Updated patch below.

Thanks,
Rafael

---
From: Rafael J. Wysocki <rjw@sisk.pl>
Subject: PM: Add a switch for disabling/enabling asynchronous suspend/resume

Add sysfs attribute kernel/power/pm_async allowing the user space to
disable and enable async suspend/resume of devices.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
drivers/base/power/main.c | 13 +++++++------
drivers/base/power/power.h | 6 +++---
kernel/power/main.c | 31 ++++++++++++++++++++++++++++++-
3 files changed, 40 insertions(+), 10 deletions(-)

Index: linux-2.6/kernel/power/main.c
===================================================================
--- linux-2.6.orig/kernel/power/main.c
+++ linux-2.6/kernel/power/main.c
@@ -44,6 +44,32 @@ int pm_notifier_call_chain(unsigned long
== NOTIFY_BAD) ? -EINVAL : 0;
}

+/* If set, devices may be suspended and resumed asynchronously. */
+int pm_async_enabled = 1;
+
+static ssize_t pm_async_show(struct kobject *kobj, struct kobj_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%d\n", pm_async_enabled);
+}
+
+static ssize_t pm_async_store(struct kobject *kobj, struct kobj_attribute *attr,
+ const char *buf, size_t n)
+{
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val))
+ return -EINVAL;
+
+ if (val > 1)
+ return -EINVAL;
+
+ pm_async_enabled = val;
+ return n;
+}
+
+power_attr(pm_async);
+
#ifdef CONFIG_PM_DEBUG
int pm_test_level = TEST_NONE;

@@ -208,9 +234,12 @@ static struct attribute * g[] = {
#ifdef CONFIG_PM_TRACE
&pm_trace_attr.attr,
#endif
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PM_DEBUG)
+#ifdef CONFIG_PM_SLEEP
+ &pm_async_attr.attr,
+#ifdef CONFIG_PM_DEBUG
&pm_test_attr.attr,
#endif
+#endif
NULL,
};

Index: linux-2.6/drivers/base/power/main.c
===================================================================
--- linux-2.6.orig/drivers/base/power/main.c
+++ linux-2.6/drivers/base/power/main.c
@@ -235,7 +235,7 @@ static int device_pm_wait_fn(struct devi
*/
static void device_pm_wait_for_masters(struct device *slave)
{
- if (!pm_trace_enabled)
+ if (pm_async_enabled && !pm_trace_enabled)
device_for_each_master(slave, slave, device_pm_wait_fn);
}

@@ -245,7 +245,8 @@ static void device_pm_wait_for_masters(s
*/
static void device_pm_wait_for_slaves(struct device *master)
{
- device_for_each_slave(master, master, device_pm_wait_fn);
+ if (pm_async_enabled)
+ device_for_each_slave(master, master, device_pm_wait_fn);
}

/**
@@ -560,7 +561,7 @@ static int device_resume_noirq(struct de
if (pm_op_started(dev))
return 0;

- if (dev->power.async_suspend && !pm_trace_enabled) {
+ if (pm_async_enabled && !pm_trace_enabled && dev->power.async_suspend) {
async_schedule(async_resume_noirq, dev);
return 0;
}
@@ -719,7 +720,7 @@ static int device_resume(struct device *
if (pm_op_started(dev))
return 0;

- if (dev->power.async_suspend && !pm_trace_enabled) {
+ if (pm_async_enabled && !pm_trace_enabled && dev->power.async_suspend) {
get_device(dev);
async_schedule(async_resume, dev);
return 0;
@@ -965,7 +966,7 @@ static int device_suspend_noirq(struct d
if (pm_op_started(dev))
return 0;

- if (dev->power.async_suspend) {
+ if (pm_async_enabled && dev->power.async_suspend) {
async_schedule(async_suspend_noirq, dev);
return 0;
}
@@ -1139,7 +1140,7 @@ static int device_suspend(struct device
if (pm_op_started(dev))
return 0;

- if (dev->power.async_suspend) {
+ if (pm_async_enabled && dev->power.async_suspend) {
get_device(dev);
async_schedule(async_suspend, dev);
return 0;
Index: linux-2.6/drivers/base/power/power.h
===================================================================
--- linux-2.6.orig/drivers/base/power/power.h
+++ linux-2.6/drivers/base/power/power.h
@@ -16,10 +16,10 @@ static inline void pm_runtime_remove(str

#ifdef CONFIG_PM_SLEEP

-/*
- * main.c
- */
+/* kernel/power/main.c */
+extern int pm_async_enabled;

+/* drivers/base/power/main.c */
extern struct list_head dpm_list; /* The active device list */

static inline struct device *to_device(struct list_head *entry)

\
 
 \ /
  Last update: 2009-08-28 00:25    [W:0.252 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site