lkml.org 
[lkml]   [2009]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectksoftirqd/0 using 100% of CPU0 (Intel Atom N270, 2.6.30 kernel)
I recently bought a QNAP TS-439 Pro Turbo NAS which uses an Intel Atom 
N270 processor. Hardware specs are here:
http://www.qnap.com/pro_detail_hardware.asp?p_id=110

Installed Debian Lenny with a backported 2.6.30 kernel. The problem is
that ksoftirq/0 takes up 100% of CPU core 0 as shown by top:

top - 00:05:03 up 19 min, 1 user, load average: 1.00, 0.99, 0.76
Tasks: 68 total, 2 running, 66 sleeping, 0 stopped, 0 zombie
Cpu(s): 1.0%us, 1.4%sy, 0.0%ni, 48.5%id, 0.9%wa, 0.0%hi, 48.3%si,
0.0%st
Mem: 1033612k total, 193684k used, 839928k free, 32932k buffers
Swap: 0k total, 0k used, 0k free, 129280k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
4 root 15 -5 0 0 0 R 100 0.0 19:02.23 ksoftirqd/0
1 root 20 0 2100 684 588 S 0 0.1 0:00.98 init
2 root 15 -5 0 0 0 S 0 0.0 0:00.00 kthreadd
3 root RT -5 0 0 0 S 0 0.0 0:00.00 migration/0
5 root RT -5 0 0 0 S 0 0.0 0:00.00 watchdog/0
6 root RT -5 0 0 0 S 0 0.0 0:00.00 migration/1
7 root 15 -5 0 0 0 S 0 0.0 0:00.00 ksoftirqd/1
8 root RT -5 0 0 0 S 0 0.0 0:00.00 watchdog/1
9 root 15 -5 0 0 0 S 0 0.0 0:00.00 events/0
10 root 15 -5 0 0 0 S 0 0.0 0:00.02 events/1
11 root 15 -5 0 0 0 S 0 0.0 0:00.00 cpuset
12 root 15 -5 0 0 0 S 0 0.0 0:00.00 khelper
15 root 15 -5 0 0 0 S 0 0.0 0:00.00 netns
18 root 15 -5 0 0 0 S 0 0.0 0:00.00 async/mgr
70 root 15 -5 0 0 0 S 0 0.0 0:00.00 kintegrityd/0
71 root 15 -5 0 0 0 S 0 0.0 0:00.00 kintegrityd/1

powertop says that hrtimer_start_range_ns causes 98% of all wakeups
(this is on a completely idle system save for one ssh session running
powertop):

Top causes for wakeups:
98.2% (500.5) <kernel core> : hrtimer_start_range_ns (tick_sched_timer)
0.4% ( 2.0) <kernel core> : clocksource_register (clocksource_watchdog)
0.3% ( 1.6) <interrupt> : uhci_hcd:usb4, sata_mv
0.2% ( 1.1) ata/0 : schedule_timeout (process_timeout)
0.2% ( 1.1) <kernel core> : schedule_delayed_work_on (delayed_work_timer_fn)
0.2% ( 1.0) ata/0 : queue_delayed_work (delayed_work_timer_fn)
0.1% ( 0.6) <interrupt> : eth0-rx-0
0.1% ( 0.5) ifconfig : e1000_msix_other (e1000_watchdog)
0.1% ( 0.5) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer)
0.0% ( 0.2) events/0 : __netdev_watchdog_up (dev_watchdog)
0.0% ( 0.2) init : hrtimer_start_range_ns (hrtimer_wakeup)
0.0% ( 0.1) <kernel core> : enqueue_task_rt (sched_rt_period_timer)
0.0% ( 0.1) <interrupt> : eth0-tx-0

/proc/interrupts seems to suggest that IRQ0 and LOC cause the majority of
all interrupts:

minime:~# cat /proc/interrupts && sleep 10 && cat /proc/interrupts
CPU0 CPU1
0: 342350 0 IO-APIC-edge timer
1: 2 0 IO-APIC-edge i8042
8: 99 0 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 4 0 IO-APIC-edge i8042
14: 107 0 IO-APIC-edge ide0
16: 0 0 IO-APIC-fasteoi uhci_hcd:usb5
18: 11453 0 IO-APIC-fasteoi uhci_hcd:usb4, sata_mv
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
23: 2 0 IO-APIC-fasteoi ehci_hcd:usb1,
uhci_hcd:usb2
27: 2282 0 PCI-MSI-edge eth0-rx-0
28: 1358 0 PCI-MSI-edge eth0-tx-0
29: 3 0 PCI-MSI-edge eth0
33: 0 0 PCI-MSI-edge ahci
NMI: 0 0 Non-maskable interrupts
LOC: 347397 347853 Local timer interrupts
SPU: 0 0 Spurious interrupts
RES: 580 10698 Rescheduling interrupts
CAL: 54 133 Function call interrupts
TLB: 61 123 TLB shootdowns
TRM: 0 0 Thermal event interrupts
ERR: 0
MIS: 0
CPU0 CPU1
0: 344852 0 IO-APIC-edge timer
1: 2 0 IO-APIC-edge i8042
8: 99 0 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 4 0 IO-APIC-edge i8042
14: 107 0 IO-APIC-edge ide0
16: 0 0 IO-APIC-fasteoi uhci_hcd:usb5
18: 11453 0 IO-APIC-fasteoi uhci_hcd:usb4, sata_mv
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
23: 2 0 IO-APIC-fasteoi ehci_hcd:usb1,
uhci_hcd:usb2
27: 2289 0 PCI-MSI-edge eth0-rx-0
28: 1360 0 PCI-MSI-edge eth0-tx-0
29: 3 0 PCI-MSI-edge eth0
33: 0 0 PCI-MSI-edge ahci
NMI: 0 0 Non-maskable interrupts
LOC: 349898 350356 Local timer interrupts
SPU: 0 0 Spurious interrupts
RES: 580 10708 Rescheduling interrupts
CAL: 54 133 Function call interrupts
TLB: 61 123 TLB shootdowns
TRM: 0 0 Thermal event interrupts
ERR: 0
MIS: 0

(2502 interrupts during 10 seconds on CPU0 for IRQ0, about the same
for LOC on both CPU cores).

Clocksource seems to be a hpet:

minime:~# cat /sys/devices/system/clocksource/clocksource0/current_clocksource
hpet

ksoftirq/0 seems to spend an awful lot of time in e1000_clean, I've
tried doing "echo t > /proc/sysrq-trigger" about 20 times and the trace
for ksoftirq/0 looks the same every time (not sure if its due to the
fact that I'm doing the debugging over the network):

[ 1950.373290] ksoftirqd/0 R running 0 4 2
[ 1950.373299] f6900380 00000040 00000000 f6900464 f808428c f808007b f6900380 00000000
[ 1950.373317] f6900464 00000040 00000000 00000000 c028e98e c1807b18 c1807b2c 00064bb3
[ 1950.373334] 0000002c 00000246 c04149cc 0000000c 0000000c c012b0d7 00000004 00000000
[ 1950.373351] Call Trace:
[ 1950.373391] [<f808428c>] ? e1000_clean+0x60/0x1f9 [e1000e]
[ 1950.373426] [<f808007b>] ? e1000_get_drvinfo+0x85/0xaa [e1000e]
[ 1950.373439] [<c028e98e>] ? net_rx_action+0x90/0x159
[ 1950.373451] [<c012b0d7>] ? __do_softirq+0x8e/0x135
[ 1950.373462] [<c012b1ac>] ? do_softirq+0x2e/0x38
[ 1950.373472] [<c012b200>] ? ksoftirqd+0x4a/0xb3
[ 1950.373482] [<c012b1b6>] ? ksoftirqd+0x0/0xb3
[ 1950.373491] [<c0136704>] ? kthread+0x42/0x67
[ 1950.373501] [<c01366c2>] ? kthread+0x0/0x67
[ 1950.373511] [<c0103ab7>] ? kernel_thread_helper+0x7/0x10

The machine has two Intel 82574L network controllers, one in use and one
down (and physically disconnected). Using the e1000e driver.

Not sure how to proceed in debugging this...google provided lots of hits
for reports of ksoftirqd/0 at 100% cpu usage but all reports seem to be
around the 2.6.26/27 era and none with 2.6.30.

Suggestions?

--
David Härdeman
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2009-08-27 00:37    [W:0.090 / U:0.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site