lkml.org 
[lkml]   [2009]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.31-rc5 regression: Oops when USB Serial disconnected while in use
On Tue, 25 August 2009 Alan Stern <stern@rowland.harvard.edu> wrote:
> On Tue, 25 Aug 2009, Bruno Prémont wrote:
> > Bang at:
> > /tmp/linux-2.6.31-rc6-gregkh/drivers/char/n_tty.c:1456
> >
> > 1456: if (canon_change && !L_ICANON(tty) && tty->read_cnt)
> > 1457: wake_up_interruptible(&tty->read_wait);
> >
> > #define ICANON 0000002
> > #define _L_FLAG(tty, f) ((tty)->termios->c_lflag & (f))
> > #define L_ICANON(tty) _L_FLAG((tty), ICANON)
> > =>
> > if (canon_change && !((tty)->termios->c_lflag & (ICANON)) && tty->read_cnt)
> > =>
> > tty->termios is probably NULL
>
> Unquestionably that is the problem.
>
> It looks like something is wrong in serial_install(). We want to
> call tty_init_termios(tty) always, regardless of whether
> tty->driver->termios[idx] is NULL. But after the call it definitely
> won't be NULL, so the test has to be made before the call is done.
> Something like this:
>
> struct ktermios *t = tty->driver->termios[idx];
>
> /* perform the standard setup */
> retval = tty_init_termios(tty);
> if (retval)
> return retval;
>
> /* If the specialized termios setup has yet to be done */
> if (!t) {
> ...
>
> Want to try that?

Change applied to usb-serial.c, serial_instal().
Tried it out with both pl2302 and ftdi-sio, no visible issues!

Actions I tried: connect, disconnect (with minicom running as well as
without), start/stop minicom multiple times.

I've seen nothing unexpected or bad in kernel log (just a note that
some sending failed while typing into minicom and pulling the USB
plug: pl2303_write_bulk_callback - failed resubmitting write urb, error -19)

Bruno


Full log while trying out:
[ 96.060039] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 96.278980] usb 1-2: New USB device found, idVendor=9e88, idProduct=9e8f
[ 96.279105] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 96.279249] usb 1-2: Product: SheevaPlug JTAGKey FT2232D B
[ 96.279346] usb 1-2: Manufacturer: FTDI
[ 96.279433] usb 1-2: SerialNumber: FTS55QK6
[ 96.279746] usb 1-2: configuration #1 chosen from 1 choice
[ 96.386173] usbcore: registered new interface driver usbserial
[ 96.386245] usbserial: USB Serial Driver core
[ 96.448488] USB Serial support registered for FTDI USB Serial Device
[ 96.448888] usb 1-2: Ignoring serial port reserved for JTAG
[ 96.449106] ftdi_sio 1-2:1.1: FTDI USB Serial Device converter detected
[ 96.449296] usb 1-2: Detected FT2232C
[ 96.449367] usb 1-2: Number of endpoints 2
[ 96.449460] usb 1-2: Endpoint 1 MaxPacketSize 64
[ 96.449544] usb 1-2: Endpoint 2 MaxPacketSize 64
[ 96.449643] usb 1-2: Setting MaxPacketSize 64
[ 96.450799] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 96.450895] usbcore: registered new interface driver ftdi_sio
[ 96.450938] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[ 147.540073] usb 1-2: USB disconnect, address 2
[ 147.540627] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 147.540820] ftdi_sio 1-2:1.1: device disconnected
[ 177.410037] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 177.628979] usb 1-2: New USB device found, idVendor=9e88, idProduct=9e8f
[ 177.629105] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 177.629251] usb 1-2: Product: SheevaPlug JTAGKey FT2232D B
[ 177.629349] usb 1-2: Manufacturer: FTDI
[ 177.629436] usb 1-2: SerialNumber: FTS55QK6
[ 177.629751] usb 1-2: configuration #1 chosen from 1 choice
[ 177.637131] usb 1-2: Ignoring serial port reserved for JTAG
[ 177.642161] ftdi_sio 1-2:1.1: FTDI USB Serial Device converter detected
[ 177.642379] usb 1-2: Detected FT2232C
[ 177.642452] usb 1-2: Number of endpoints 2
[ 177.642546] usb 1-2: Endpoint 1 MaxPacketSize 64
[ 177.642629] usb 1-2: Endpoint 2 MaxPacketSize 64
[ 177.642729] usb 1-2: Setting MaxPacketSize 64
[ 177.643137] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 199.790072] usb 1-2: USB disconnect, address 3
[ 199.790622] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 199.790815] ftdi_sio 1-2:1.1: device disconnected
[ 202.910037] usb 1-2: new full speed USB device using uhci_hcd and address 4
[ 203.128984] usb 1-2: New USB device found, idVendor=9e88, idProduct=9e8f
[ 203.129101] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 203.129242] usb 1-2: Product: SheevaPlug JTAGKey FT2232D B
[ 203.129333] usb 1-2: Manufacturer: FTDI
[ 203.129415] usb 1-2: SerialNumber: FTS55QK6
[ 203.129723] usb 1-2: configuration #1 chosen from 1 choice
[ 203.137131] usb 1-2: Ignoring serial port reserved for JTAG
[ 203.142155] ftdi_sio 1-2:1.1: FTDI USB Serial Device converter detected
[ 203.142366] usb 1-2: Detected FT2232C
[ 203.142431] usb 1-2: Number of endpoints 2
[ 203.142519] usb 1-2: Endpoint 1 MaxPacketSize 64
[ 203.142596] usb 1-2: Endpoint 2 MaxPacketSize 64
[ 203.142691] usb 1-2: Setting MaxPacketSize 64
[ 203.143150] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB1
[ 266.033894] usbcore: deregistering interface driver ftdi_sio
[ 266.038905] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 266.042730] ftdi_sio 1-2:1.1: device disconnected
[ 266.045992] USB Serial deregistering driver FTDI USB Serial Device
[ 284.281542] usbcore: deregistering interface driver usbserial
[ 288.540072] usb 1-2: USB disconnect, address 4
[ 294.000036] usb 1-2: new full speed USB device using uhci_hcd and address 5
[ 294.218988] usb 1-2: New USB device found, idVendor=9e88, idProduct=9e8f
[ 294.219114] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 294.219259] usb 1-2: Product: SheevaPlug JTAGKey FT2232D B
[ 294.219357] usb 1-2: Manufacturer: FTDI
[ 294.219443] usb 1-2: SerialNumber: FTS55QK6
[ 294.219759] usb 1-2: configuration #1 chosen from 1 choice
[ 294.261216] usbcore: registered new interface driver usbserial
[ 294.261288] usbserial: USB Serial Driver core
[ 294.267068] USB Serial support registered for FTDI USB Serial Device
[ 294.267281] usb 1-2: Ignoring serial port reserved for JTAG
[ 294.267383] ftdi_sio 1-2:1.1: FTDI USB Serial Device converter detected
[ 294.267479] usb 1-2: Detected FT2232C
[ 294.267509] usb 1-2: Number of endpoints 2
[ 294.267555] usb 1-2: Endpoint 1 MaxPacketSize 64
[ 294.267590] usb 1-2: Endpoint 2 MaxPacketSize 64
[ 294.267639] usb 1-2: Setting MaxPacketSize 64
[ 294.269091] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 294.269197] usbcore: registered new interface driver ftdi_sio
[ 294.269240] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[ 300.000027] Machine check events logged
[ 723.280035] usb 1-1: new full speed USB device using uhci_hcd and address 6
[ 723.446315] usb 1-1: New USB device found, idVendor=067b, idProduct=2303
[ 723.450777] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 723.455164] usb 1-1: Product: USB-Serial Controller
[ 723.459524] usb 1-1: Manufacturer: Prolific Technology Inc.
[ 723.465908] usb 1-1: configuration #1 chosen from 1 choice
[ 723.916652] USB Serial support registered for pl2303
[ 723.921271] pl2303 1-1:1.0: pl2303 converter detected
[ 723.935435] usb 1-1: pl2303 converter now attached to ttyUSB1
[ 723.939890] usbcore: registered new interface driver pl2303
[ 723.944327] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 739.750073] usb 1-1: USB disconnect, address 6
[ 739.750909] pl2303 ttyUSB1: pl2303 converter now disconnected from ttyUSB1
[ 739.751075] pl2303 1-1:1.0: device disconnected
[ 743.530041] usb 1-1: new full speed USB device using uhci_hcd and address 7
[ 743.696932] usb 1-1: New USB device found, idVendor=067b, idProduct=2303
[ 743.697050] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 743.697190] usb 1-1: Product: USB-Serial Controller
[ 743.697271] usb 1-1: Manufacturer: Prolific Technology Inc.
[ 743.697600] usb 1-1: configuration #1 chosen from 1 choice
[ 743.700108] pl2303 1-1:1.0: pl2303 converter detected
[ 743.712094] usb 1-1: pl2303 converter now attached to ttyUSB2
[ 752.250070] usb 1-1: USB disconnect, address 7
[ 752.250499] usb 1-1: pl2303_write_bulk_callback - failed resubmitting write urb, error -19
[ 752.251803] pl2303 ttyUSB2: pl2303 converter now disconnected from ttyUSB2
[ 752.251967] pl2303 1-1:1.0: device disconnected
[ 776.780035] usb 1-1: new full speed USB device using uhci_hcd and address 8
[ 776.946378] usb 1-1: New USB device found, idVendor=067b, idProduct=2303
[ 776.946496] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 776.946633] usb 1-1: Product: USB-Serial Controller
[ 776.946716] usb 1-1: Manufacturer: Prolific Technology Inc.
[ 776.947044] usb 1-1: configuration #1 chosen from 1 choice
[ 776.949528] pl2303 1-1:1.0: pl2303 converter detected
[ 776.961542] usb 1-1: pl2303 converter now attached to ttyUSB3
[ 816.250068] usb 1-1: USB disconnect, address 8
[ 816.250476] pl2303 ttyUSB3: pl2303 converter now disconnected from ttyUSB3
[ 816.250644] pl2303 1-1:1.0: device disconnected
[ 818.250058] usb 1-2: USB disconnect, address 5
[ 818.250531] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 818.250723] ftdi_sio 1-2:1.1: device disconnected
[ 829.914462] usbcore: deregistering interface driver pl2303
[ 829.915564] USB Serial deregistering driver pl2303
[ 829.915958] usbcore: deregistering interface driver ftdi_sio
[ 829.916113] USB Serial deregistering driver FTDI USB Serial Device
[ 829.916472] usbcore: deregistering interface driver usbserial

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2009-08-26 22:43    [W:0.279 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site