lkml.org 
[lkml]   [2009]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [tip:core/rcu] rcu: Remove lockdep annotations from RCU's _notrace() API members
On Wed, Aug 26, 2009 at 10:49:38AM +0200, Ingo Molnar wrote:
>
> * tip-bot for Paul E. McKenney <paulmck@linux.vnet.ibm.com> wrote:
>
> > Commit-ID: 06e799764eb7c2e4640888d438c3524d756613e1
> > Gitweb: http://git.kernel.org/tip/06e799764eb7c2e4640888d438c3524d756613e1
> > Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
> > AuthorDate: Tue, 25 Aug 2009 18:53:37 -0700
> > Committer: Ingo Molnar <mingo@elte.hu>
> > CommitDate: Wed, 26 Aug 2009 09:45:41 +0200
> >
> > rcu: Remove lockdep annotations from RCU's _notrace() API members
>
> I'm afraid this does not solve the problem either - the attached
> config crashes too. Does it boot for you? It should boot fine on
> most 64-bit x86 systems.

OK, got my hands on a 64-bit x86 system, building. When I did "make
oldconfig" on the attached config file, I ended up with the following
diffs. If there is some other command I should use, please let me know.
Otherwise, will let you know how this goes.
Thanx, Paul

--- .config 2009-08-26 03:23:18.000000000 -0700
+++ ../config 2009-08-26 03:10:56.000000000 -0700
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Wed Aug 26 03:23:18 2009
+# Linux kernel version: 2.6.31-rc7
+# Wed Aug 26 10:45:38 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
@@ -161,11 +161,11 @@
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y

#
# GCOV-based kernel profiling
#
-# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -247,6 +247,7 @@
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
@@ -303,6 +304,7 @@
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -734,7 +736,6 @@
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set

#
# Device Drivers
@@ -856,7 +857,6 @@
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
# CONFIG_SCSI_ACARD is not set
@@ -911,7 +911,6 @@
# CONFIG_SCSI_LPFC is not set
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=m
-# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SRP=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
@@ -1008,7 +1007,6 @@
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
# CONFIG_I2O_EXT_ADAPTEC_DMA64 is not set
-# CONFIG_I2O_CONFIG is not set
CONFIG_I2O_BUS=y
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not set
@@ -1141,7 +1139,6 @@
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y
CONFIG_BNX2=y
-# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_ATL1E=m
@@ -1213,7 +1210,6 @@
# CONFIG_B43LEGACY is not set
CONFIG_ZD1211RW=m
CONFIG_ZD1211RW_DEBUG=y
-# CONFIG_RT2X00 is not set
CONFIG_HERMES=y
# CONFIG_HERMES_CACHE_FW_ON_INIT is not set
# CONFIG_PLX_HERMES is not set
@@ -1227,7 +1223,6 @@
#
# WiMAX Wireless Broadband devices
#
-# CONFIG_WIMAX_I2400M_USB is not set
# CONFIG_WIMAX_I2400M_SDIO is not set

#
@@ -1292,11 +1287,9 @@
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=m
CONFIG_ISDN=y
-# CONFIG_MISDN is not set
# CONFIG_ISDN_I4L is not set
# CONFIG_ISDN_CAPI is not set
CONFIG_PHONE=m
-# CONFIG_PHONE_IXJ is not set

#
# Input device support
@@ -1499,13 +1492,11 @@
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
-# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
-# CONFIG_I2C_NFORCE2_S4985 is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=m
@@ -1674,7 +1665,6 @@
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_MFD_WM8400=y
-# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_PCF50633=m
# CONFIG_PCF50633_ADC is not set
CONFIG_PCF50633_GPIO=m
@@ -1954,7 +1944,6 @@
CONFIG_USB_U132_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=m

#
@@ -2058,7 +2047,6 @@
CONFIG_USB_TEST=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_VST=m
-# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
@@ -2398,6 +2386,7 @@
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
+CONFIG_ALLOW_WARNINGS=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
@@ -2405,6 +2394,7 @@
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
+CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
# CONFIG_DETECT_SOFTLOCKUP is not set
@@ -2468,7 +2458,7 @@
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
@@ -2489,6 +2479,8 @@
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_POWER_TRACER=y
+CONFIG_KSYM_TRACER=y
+# CONFIG_PROFILE_KSYM_TRACER is not set
CONFIG_STACK_TRACER=y
CONFIG_KMEMTRACE=y
CONFIG_WORKQUEUE_TRACER=y

\
 
 \ /
  Last update: 2009-08-26 19:35    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site