Messages in this thread | | | Date | Tue, 25 Aug 2009 15:55:21 +0200 (CEST) | From | Paweł Gołaszewski <> | Subject | PROBLEM: oops |
| |
No matter which kernel I'm using (2.6.27 - 2.6.30) it crashes. Works for few minutes and crashes. Even SysRq doesn't work.
Dunno how to trigger it on other machine than mine (I have two, both affected). If more info is required - just ask. [...] [24483.211036] BUG: unable to handle kernel NULL pointer dereference at 00000058 [24483.211144] IP: [<c081cf9a>] pick_next_task_fair+0x6a/0x100 [24483.211247] Oops: 0000 [#1] SMP [24483.211300] Modules linked in: netconsole configfs dm_mod softdog sch_sfq xfs raid10 uhci_hcd eepro100 ppdev parport_pc floppy parport ehci_hcd e100 piix i2c_piix4 thermal psmouse e1000 container ide_core usbcore mii button pcspkr serio_raw processor i2c_core sg evdev ext3 jbd mbcache scsi_wait_scan sd_mod crc_t10dif ata_piix libata dock aic7xxx sym53c8xx scsi_transport_spi scsi_mod raid1 md_mod [24483.211878] [24483.211910] Pid: 1677, comm: md2_raid10 Not tainted (2.6.27.31-1 #1) [24483.211952] EIP: 0060:[<c081cf9a>] EFLAGS: 00010046 CPU: 2 [24483.211996] EIP is at pick_next_task_fair+0x6a/0x100 [24483.212032] EAX: c1d941e0 EBX: c1d9421c ECX: 00000000 EDX: 00000000 [24483.212073] ESI: 00000000 EDI: 00000000 EBP: c1d941e0 ESP: f71b7ebc [24483.212115] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [24483.212153] Process md2_raid10 (pid: 1677, ti=f71b6000 task=f709c600 task.ti=f71b6000) [24483.212196] Stack: 00000000 00000000 c1d941e0 c1d941e0 c0acbf00 c1d94690 00000000 c1d941e0 [24483.212323] c0a9cb29 f8a34b2c f72b1000 00000286 f8a35452 00000000 f709c600 c1d941e0 [24483.212451] c1d94690 00001644 00000002 c1d8f688 c1d8f684 00000000 000021e0 f709c794 [24483.212577] Call Trace: [24483.212626] [<c0a9cb29>] schedule+0x5b9/0xc20 [24483.212697] [<f8a34b2c>] cleanup_module+0x271c/0x47db [raid10] [24483.212755] [<f8a35452>] cleanup_module+0x3042/0x47db [raid10] [24483.212805] [<c0a9d50d>] schedule_timeout+0xbd/0xf0 [24483.212853] [<c0804d53>] common_interrupt+0x23/0x30 [24483.212911] [<f882d543>] md_register_thread+0x153/0x180 [md_mod] [24483.212982] [<c083bcd0>] autoremove_wake_function+0x0/0x40 [24483.213056] [<f882d490>] md_register_thread+0xa0/0x180 [md_mod] [24483.213111] [<c083ba29>] kthread+0x39/0x70 [24483.213156] [<c083b9f0>] kthread+0x0/0x70 [24483.213199] [<c0805007>] kernel_thread_helper+0x7/0x10 [24483.213249] ======================= [24483.213281] Code: 8b 4e 1c 85 c9 75 7f 8b 43 44 8b 90 18 04 00 00 8b 80 14 04 00 00 89 56 24 89 46 20 89 73 38 8b 46 28 8b 56 2c 89 46 38 89 56 3c <8b> 5e 58 85 db 74 67 8b 4b 28 31 f6 85 c9 74 f0 8b 73 44 8b 53 [24483.213899] EIP: [<c081cf9a>] pick_next_task_fair+0x6a/0x100 SS:ESP 0068:f71b7ebc [24483.214257] ---[ end trace c9dd311f4b324acb ]--- [...]
There is some bugs catched too: [ 493.923295] BUG: soft lockup - CPU#0 stuck for 61s! [md2_raid10:1672] [ 493.923295] Modules linked in: softdog sch_sfq xfs raid10 uhci_hcd eepro100 ppdev parport_pc parport ehci_hcd floppy i2c_piix4 psmouse piix e100 thermal serio_raw e1000 container i2c_core mii usbcore pcspkr evdev ide_core sg button processor ext3 jbd mbcache scsi_wait_scan sd_mod crc_t10dif ata_piix libata dock aic7xxx sym53c8xx scsi_transport_spi scsi_mod raid1 md_mod [ 493.923295] [ 493.923295] Pid: 1672, comm: md2_raid10 Not tainted (2.6.27.31-1 #1) [ 493.923295] EIP: 0060:[<f8a38ff5>] EFLAGS: 00010282 CPU: 0 [ 493.923295] EIP is at cleanup_module+0x2be5/0x47db [raid10] [ 493.923295] EAX: f411c000 EBX: f2305c60 ECX: 000005bf EDX: 0000000d [ 493.923295] ESI: f411ca41 EDI: f1dffa41 EBP: 0000009c ESP: f71f3ef0 [ 493.923295] DS: 0068 ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 493.923295] CR0: 8005003b CR2: 080bd054 CR3: 36461000 CR4: 000006d0 [ 493.923295] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 493.923295] DR6: ffff0ff0 DR7: 00000400 [ 493.923295] [<c09e7c57>] ? net_rx_action+0x127/0x200 [ 493.923295] [<c0a9d50d>] ? schedule_timeout+0xbd/0xf0 [ 493.923295] [<c0804d53>] ? common_interrupt+0x23/0x30 [ 493.923295] [<c083be41>] ? finish_wait+0x31/0x80 [ 493.923295] [<f882d4b9>] ? md_register_thread+0xc9/0x180 [md_mod] [ 493.923295] [<c083bcd0>] ? autoremove_wake_function+0x0/0x40 [ 493.923295] [<f882d490>] ? md_register_thread+0xa0/0x180 [md_mod] [ 493.923295] [<c083ba29>] ? kthread+0x39/0x70 [ 493.923295] [<c083b9f0>] ? kthread+0x0/0x70 [ 493.923295] [<c0805007>] ? kernel_thread_helper+0x7/0x10 [ 493.923295] =======================
# cat /proc/mdstat Personalities : [raid1] [raid10] md2 : active raid10 sda2[0] sdf2[5] sde2[4] sdd2[3] sdc2[2] sdb2[1] 834929664 blocks 64K chunks 2 far-copies [6/6] [UUUUUU] [=>...................] resync = 7.9% (66705088/834929664) finish=1816.4min speed=7046K/sec md1 : active raid1 sde1[0] sdf1[2](S) sdd1[1] 14651136 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdc1[2](S) sdb1[1] 14651136 blocks [2/2] [UU] unused devices: <none>
# mount /dev/md0 on / type ext3 (rw) none on /proc type proc (rw,gid=17) usbfs on /proc/bus/usb type usbfs (rw,devgid=78,devmode=664) sysfs on /sys type sysfs (rw) securityfs on /sys/kernel/security type securityfs (rw) none on /dev/cpuset type cgroup (rw,cpuset,noprefix) /dev/md1 on /vservers type ext3 (rw) /dev/md2 on /vservers/news/srv type xfs (rw,noatime) /vservers/news/srv/spool on /vservers/news/var/spool/news type none (rw,bind) /vservers/news/srv/lib on /vservers/news/var/lib/news type none (rw,bind) none on /dev/pts type devpts (rw,gid=5,mode=620) none on /dev/shm type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
# cat /proc/version Linux version 2.6.27.31-1 (blues@carme-pld-i686) (gcc version 4.4.1 20090724 (release) (PLD-Linux) ) #1 SMP Fri Aug 21 23:19:19 CEST 2009
4 processors (right now only one left for testing): # cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 10 model name : Pentium III (Cascades) stepping : 1 cpu MHz : 700.184 cache size : 1024 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1400.71 clflush size : 32 power management:
# lspci 00:08.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 23) 00:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 00:0a.0 VGA compatible controller: Cirrus Logic GD 5480 (rev 23) 00:0b.0 PIC: Intel Corporation 683053 Programmable Interrupt Device 00:0c.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) 00:0c.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 00:0c.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) 00:0c.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02) 00:10.0 Host bridge: Intel Corporation 450NX - 82451NX Memory & I/O Controller (rev 03) 00:12.0 Host bridge: Intel Corporation 450NX - 82454NX/84460GX PCI Expander Bridge (rev 04) 00:13.0 Host bridge: Intel Corporation 450NX - 82454NX/84460GX PCI Expander Bridge (rev 04) 01:01.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet Controller 01:02.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01) 01:02.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01) 01:03.0 SCSI storage controller: LSI Logic / Symbios Logic 53C896/897 (rev 07) 01:03.1 SCSI storage controller: LSI Logic / Symbios Logic 53C896/897 (rev 07)
# dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27.31-1 (blues@carme-pld-i686) (gcc version 4.4.1 20090724 (release) (PLD-Linux) ) #1 SMP Fri Aug 21 23:19:19 CEST 2009 [ 0.000000] PAT WC disabled due to known CPU erratum. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005fffa800 (usable) [ 0.000000] BIOS-e820: 000000005fffa800 - 000000005ffffc00 (ACPI data) [ 0.000000] BIOS-e820: 000000005ffffc00 - 0000000060000000 (ACPI NVS) [ 0.000000] DMI 2.1 present. [ 0.000000] last_pfn = 0x5fffa max_arch_pfn = 0x100000 [ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000 [ 0.000000] RAMDISK: 00e6c000 - 00eff13b [ 0.000000] 639MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 38000000 [ 0.000000] low ram: 00000000 - 38000000 [ 0.000000] bootmap 00009000 - 00010000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000200000 - 0000c8b120] TEXT DATA BSS ==> [0000200000 - 0000c8b120] [ 0.000000] #4 [0000e6c000 - 0000eff13b] RAMDISK ==> [0000e6c000 - 0000eff13b] [ 0.000000] #5 [0000c8c000 - 0000c91000] INIT_PG_TABLE ==> [0000c8c000 - 0000c91000] [ 0.000000] #6 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] [ 0.000000] found SMP MP-table at [c00f6b30] 000f6b30 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00038000 [ 0.000000] HighMem 0x00038000 -> 0x0005fffa [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0005fffa [ 0.000000] On node 0 totalpages: 393112 [ 0.000000] DMA zone: 3962 pages, LIFO batch:0 [ 0.000000] Normal zone: 223300 pages, LIFO batch:31 [ 0.000000] HighMem zone: 162394 pages, LIFO batch:31 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: INTEL [ 0.000000] MPTABLE: Product ID: S450NX [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #3 (Bootup-CPU) [ 0.000000] Processor #0 [ 0.000000] Processor #1 [ 0.000000] Processor #2 [ 0.000000] I/O APIC #4 Version 19 at 0xFEC00000. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 4 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 60000000:a0000000) [ 0.000000] PERCPU: Allocating 18108 bytes of per cpu data [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389656 [ 0.000000] Kernel command line: BOOT_IMAGE=testing ro root=900 noapic nolapic acpi=off [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] TSC: Using PIT calibration value [ 0.000000] Detected 700.184 MHz processor. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.003333] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.003333] Memory: 1545280k/1572840k available (2700k kernel code, 26172k reserved, 452k data, 6116k init, 655336k highmem) [ 0.003333] virtual kernel memory layout: [ 0.003333] fixmap : 0xffdf9000 - 0xfffff000 (2072 kB) [ 0.003333] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.003333] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) [ 0.003333] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.003333] .init : 0xc0207000 - 0xc0800000 (6116 kB) [ 0.003333] .data : 0xc0ba2000 - 0xc0c133cc ( 452 kB) [ 0.003333] .text : 0xc0800000 - 0xc0aa3060 (2700 kB) [ 0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated [ 0.003333] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.003373] Calibrating delay loop (skipped), value calculated using timer frequency.. 1400.71 BogoMIPS (lpj=2333946) [ 0.003567] Security Framework initialized [ 0.003672] SELinux: Disabled at boot. [ 0.003782] Mount-cache hash table entries: 512 [ 0.004521] Initializing cgroup subsys ns [ 0.004593] Initializing cgroup subsys cpuacct [ 0.004655] Initializing cgroup subsys memory [ 0.004721] Initializing cgroup subsys devices [ 0.004836] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.004935] CPU: L2 cache: 1024K [ 0.004998] CPU serial number disabled. [ 0.005062] Intel machine check architecture supported. [ 0.005126] Intel machine check reporting enabled on CPU#0. [ 0.005227] Checking 'hlt' instruction... OK. [ 0.017889] BIOS bug, local APIC #3 not detected!... [ 0.017955] ... forcing use of dummy APIC emulation.(tell your hw vendor) [ 0.018018] SMP disabled [ 0.018309] Brought up 1 CPUs [ 0.018370] Total of 1 processors activated (1400.71 BogoMIPS). [ 0.019217] net_namespace: 840 bytes [ 0.019567] NET: Registered protocol family 16 [ 0.020639] EISA bus registered [ 0.030160] bios32_service: base:000fd690 length:00000970 entry:000004b4 [ 0.030240] PCI: PCI BIOS revision 2.10 entry at 0x4b4, last bus=1 [ 0.030304] PCI: Using configuration type 1 for base access [ 0.033113] ACPI: Interpreter disabled. [ 0.033180] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.033368] pnp: PnP ACPI: disabled [ 0.033433] PnPBIOS: Scanning system for PnP BIOS support... [ 0.033525] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6d90 [ 0.033593] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb2cb, dseg 0x400 [ 0.039822] PnPBIOS: 20 nodes reported by PnP BIOS; 20 recorded by driver [ 0.040903] PCI: Probing PCI hardware [ 0.040968] PCI: Probing PCI hardware (bus 00) [ 0.041189] PCI: 0000:00:08.0 reg 10 io port: [2000, 20ff] [ 0.041204] PCI: 0000:00:08.0 reg 14 32bit mmio: [fa102000, fa1020ff] [ 0.041320] PCI: 0000:00:09.0 reg 10 32bit mmio: [fa100000, fa100fff] [ 0.041334] PCI: 0000:00:09.0 reg 14 io port: [2400, 243f] [ 0.041348] PCI: 0000:00:09.0 reg 18 32bit mmio: [fa000000, fa0fffff] [ 0.041379] PCI: 0000:00:09.0 reg 30 32bit mmio: [0, fffff] [ 0.041415] pci 0000:00:09.0: supports D1 [ 0.041421] pci 0000:00:09.0: supports D2 [ 0.041428] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot [ 0.041497] pci 0000:00:09.0: PME# disabled [ 0.041581] PCI: 0000:00:0a.0 reg 10 32bit mmio: [fc000000, fdffffff] [ 0.041596] PCI: 0000:00:0a.0 reg 14 32bit mmio: [fa101000, fa101fff] [ 0.041633] PCI: 0000:00:0a.0 reg 30 32bit mmio: [0, 7fff] [ 0.041850] PCI: 0000:00:0c.1 reg 20 io port: [2460, 246f] [ 0.041939] PCI: 0000:00:0c.2 reg 20 io port: [2440, 245f] [ 0.041989] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, [ 0.041993] * this clock source is slow. Consider trying other clock sources [ 0.042193] pci 0000:00:0c.3: quirk: region 0c00-0c3f claimed by PIIX4 ACPI [ 0.042263] pci 0000:00:0c.3: quirk: region 0cc0-0ccf claimed by PIIX4 SMB [ 0.042334] pci 0000:00:0c.3: PIIX4 devres B PIO at 0ca2-0ca3 [ 0.042400] pci 0000:00:0c.3: PIIX4 devres C PIO at 0ca0-0ca1 [ 0.042544] pci 0000:00:10.0: Searching for i450NX host bridges [ 0.042811] PCI: 0000:01:01.0 reg 10 32bit mmio: [fe040000, fe05ffff] [ 0.042826] PCI: 0000:01:01.0 reg 14 32bit mmio: [fe020000, fe03ffff] [ 0.042840] PCI: 0000:01:01.0 reg 18 io port: [3c00, 3c3f] [ 0.042872] PCI: 0000:01:01.0 reg 30 32bit mmio: [0, 1ffff] [ 0.042925] pci 0000:01:01.0: PME# supported from D0 D3hot D3cold [ 0.042993] pci 0000:01:01.0: PME# disabled [ 0.043093] PCI: 0000:01:02.0 reg 10 io port: [3000, 30ff] [ 0.043113] PCI: 0000:01:02.0 reg 14 64bit mmio: [fe004000, fe004fff] [ 0.043145] PCI: 0000:01:02.0 reg 30 32bit mmio: [0, 1ffff] [ 0.043219] PCI: 0000:01:02.1 reg 10 io port: [3400, 34ff] [ 0.043239] PCI: 0000:01:02.1 reg 14 64bit mmio: [fe005000, fe005fff] [ 0.043270] PCI: 0000:01:02.1 reg 30 32bit mmio: [0, 1ffff] [ 0.043454] PCI: 0000:01:03.0 reg 10 io port: [3800, 38ff] [ 0.043474] PCI: 0000:01:03.0 reg 14 64bit mmio: [fe006000, fe0063ff] [ 0.043494] PCI: 0000:01:03.0 reg 1c 64bit mmio: [fe000000, fe001fff] [ 0.043542] pci 0000:01:03.0: supports D1 [ 0.043548] pci 0000:01:03.0: supports D2 [ 0.043592] PCI: 0000:01:03.1 reg 10 io port: [4000, 40ff] [ 0.043612] PCI: 0000:01:03.1 reg 14 64bit mmio: [fe006400, fe0067ff] [ 0.043631] PCI: 0000:01:03.1 reg 1c 64bit mmio: [fe002000, fe003fff] [ 0.043679] pci 0000:01:03.1: supports D1 [ 0.043684] pci 0000:01:03.1: supports D2 [ 0.047163] NetLabel: Initializing [ 0.047163] NetLabel: domain hash size = 128 [ 0.047163] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.047163] NetLabel: unlabeled traffic allowed by default [ 0.047163] system 00:00: ioport range 0xca0-0xca3 has been reserved [ 0.047208] system 00:02: iomem range 0xffffffffffe00000-0xffffffffffffffff has been reserved [ 0.047314] system 00:04: iomem range 0xdc000-0xdffff has been reserved [ 0.047394] system 00:06: iomem range 0x0-0x9ffff could not be reserved [ 0.047462] system 00:06: iomem range 0xe4000-0xfffff could not be reserved [ 0.047531] system 00:06: iomem range 0x100000-0x5fffffff could not be reserved [ 0.047632] system 00:0f: ioport range 0x4d0-0x4d1 has been reserved [ 0.047701] system 00:0f: ioport range 0xc00-0xc3f has been reserved [ 0.047767] system 00:0f: ioport range 0xcc0-0xccf has been reserved [ 0.047844] system 00:10: iomem range 0xfffffffffec00000-0xfffffffffec0ffff has been reserved [ 0.047926] system 00:10: iomem range 0xfffffffffee00000-0xfffffffffee00fff has been reserved [ 0.048020] system 00:12: iomem range 0xcfe00-0xcffff has been reserved [ 0.050358] bus: 00 index 0 io port: [0, ffff] [ 0.050420] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 0.050481] bus: 01 index 0 io port: [0, ffff] [ 0.050541] bus: 01 index 1 mmio: [0, ffffffffffffffff] [ 0.050603] bus: 80 index 0 io port: [0, ffff] [ 0.050664] bus: 80 index 1 mmio: [0, ffffffffffffffff] [ 0.050747] NET: Registered protocol family 2 [ 0.051061] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.051597] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.057027] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.060455] TCP: Hash tables configured (established 131072 bind 65536) [ 0.060541] TCP reno registered [ 0.060986] NET: Registered protocol family 1 [ 0.061484] checking if image is initramfs...it isn't (no cpio magic); looks like an initrd [ 0.138243] Freeing initrd memory: 588k freed [ 0.140179] audit: initializing netlink socket (disabled) [ 0.140301] type=2000 audit(1251202105.139:1): initialized [ 0.162728] highmem bounce pool size: 64 pages [ 0.162812] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.172067] VFS: Disk quotas dquot_6.5.1 [ 0.173658] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.174220] msgmni has been set to 1741 [ 0.174718] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.174799] io scheduler noop registered [ 0.174859] io scheduler anticipatory registered [ 0.174920] io scheduler deadline registered [ 0.175022] io scheduler cfq registered (default) [ 0.175179] pci 0000:00:09.0: Firmware left e100 interrupts enabled; disabling [ 0.175272] pci 0000:00:0a.0: Boot video device [ 0.176285] isapnp: Scanning for PnP cards... [ 0.533412] isapnp: No Plug & Play device found [ 0.653627] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 0.906736] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.160067] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.161903] 00:13: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.162739] 00:19: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.168033] brd: module loaded [ 1.168336] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.168736] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1 [ 1.168803] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.169661] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.170681] mice: PS/2 mouse device common for all mice [ 1.171175] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0 [ 1.171268] rtc0: alarms up to one day [ 1.171674] EISA: Probing bus 0 at eisa.0 [ 1.171757] Cannot allocate resource for EISA slot 2 [ 1.171820] Cannot allocate resource for EISA slot 3 [ 1.171883] Cannot allocate resource for EISA slot 4 [ 1.171970] EISA: Detected 0 cards. [ 1.172529] TCP cubic registered [ 1.173312] NET: Registered protocol family 10 [ 1.173840] lo: Disabled Privacy Extensions [ 1.174004] Mobile IPv6 [ 1.174067] NET: Registered protocol family 17 [ 1.174156] Using IPI No-Shortcut mode [ 1.174791] TuxOnIce: Ignoring late initcall, as requested. [ 1.174881] registered taskstats version 1 [ 1.175464] rtc_cmos 00:0a: setting system clock to 2009-08-25 12:08:27 UTC (1251202107) [ 1.194748] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.276725] RAMDISK: Compressed image found at block 0 [ 1.363099] VFS: Mounted root (romfs filesystem) readonly. [ 1.407595] md: raid1 personality registered for level 1 [ 1.467379] SCSI subsystem initialized [ 1.493361] sym0: <896> rev 0x7 at pci 0000:01:03.0 irq 11 [ 1.495546] sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking [ 1.496563] sym0: SCSI BUS has been reset. [ 1.502316] scsi0 : sym-2.2.3 [ 1.504139] sym1: <896> rev 0x7 at pci 0000:01:03.1 irq 11 [ 1.506293] sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking [ 1.506561] sym1: SCSI BUS has been reset. [ 1.513030] scsi1 : sym-2.2.3 [ 1.514852] sym2: <810a> rev 0x23 at pci 0000:00:08.0 irq 11 [ 1.517008] sym2: No NVRAM, ID 7, Fast-10, SE, parity checking [ 1.519894] sym2: SCSI BUS has been reset. [ 1.523511] scsi2 : sym-2.2.3 [ 16.752206] scsi3 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 [ 16.752212] <Adaptec 3960D Ultra160 SCSI adapter> [ 16.752216] aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs [ 16.752220] [ 16.964142] scsi 3:0:0:0: Direct-Access FUJITSU MBA3300NC 0102 PQ: 0 ANSI: 3 [ 16.964240] scsi3:A:0:0: Tagged Queuing enabled. Depth 253 [ 16.964363] scsi target3:0:0: Beginning Domain Validation [ 16.968740] scsi target3:0:0: wide asynchronous [ 16.972171] scsi target3:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) [ 16.979661] scsi target3:0:0: Ending Domain Validation [ 16.981185] scsi 3:0:1:0: Direct-Access FUJITSU MBA3300NC 0102 PQ: 0 ANSI: 3 [ 16.981272] scsi3:A:1:0: Tagged Queuing enabled. Depth 253 [ 16.981384] scsi target3:0:1: Beginning Domain Validation [ 16.985757] scsi target3:0:1: wide asynchronous [ 16.989191] scsi target3:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) [ 16.996635] scsi target3:0:1: Ending Domain Validation [ 16.998161] scsi 3:0:2:0: Direct-Access FUJITSU MBA3300NC 0102 PQ: 0 ANSI: 3 [ 16.998246] scsi3:A:2:0: Tagged Queuing enabled. Depth 253 [ 16.998356] scsi target3:0:2: Beginning Domain Validation [ 17.002725] scsi target3:0:2: wide asynchronous [ 17.006152] scsi target3:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) [ 17.013644] scsi target3:0:2: Ending Domain Validation [ 17.015195] scsi 3:0:3:0: Direct-Access FUJITSU MBA3300NC 0102 PQ: 0 ANSI: 3 [ 17.015282] scsi3:A:3:0: Tagged Queuing enabled. Depth 253 [ 17.015394] scsi target3:0:3: Beginning Domain Validation [ 17.019758] scsi target3:0:3: wide asynchronous [ 17.023185] scsi target3:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) [ 17.030671] scsi target3:0:3: Ending Domain Validation [ 17.032221] scsi 3:0:4:0: Direct-Access FUJITSU MBA3300NC 0102 PQ: 0 ANSI: 3 [ 17.032309] scsi3:A:4:0: Tagged Queuing enabled. Depth 253 [ 17.032422] scsi target3:0:4: Beginning Domain Validation [ 17.036780] scsi target3:0:4: wide asynchronous [ 17.040196] scsi target3:0:4: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) [ 17.047697] scsi target3:0:4: Ending Domain Validation [ 17.049225] scsi 3:0:5:0: Direct-Access FUJITSU MBA3300NC 0102 PQ: 0 ANSI: 3 [ 17.049314] scsi3:A:5:0: Tagged Queuing enabled. Depth 253 [ 17.049429] scsi target3:0:5: Beginning Domain Validation [ 17.053778] scsi target3:0:5: wide asynchronous [ 17.057189] scsi target3:0:5: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) [ 17.064676] scsi target3:0:5: Ending Domain Validation [ 17.126291] scsi 3:0:6:0: Processor ESG-SHV SCA HSBP M6 0.65 PQ: 0 ANSI: 2 [ 17.126386] scsi target3:0:6: Beginning Domain Validation [ 17.258886] scsi target3:0:6: Ending Domain Validation [ 31.964495] scsi4 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 [ 31.964500] <Adaptec 3960D Ultra160 SCSI adapter> [ 31.964504] aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs [ 31.964508] [ 32.043887] libata version 3.00 loaded. [ 32.055564] ata_piix 0000:00:0c.1: version 2.12 [ 32.055830] scsi5 : ata_piix [ 32.056297] scsi6 : ata_piix [ 32.056631] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x2460 irq 14 [ 32.056700] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x2468 irq 15 [ 32.261229] ata2: port disabled. ignoring. [ 32.261342] ata_piix 0000:00:10.0: no available native port [ 32.277970] Driver 'sd' needs updating - please use bus_type methods [ 32.279198] sd 3:0:0:0: [sda] 585937500 512-byte hardware sectors (300000 MB) [ 32.282022] sd 3:0:0:0: [sda] Write Protect is off [ 32.282086] sd 3:0:0:0: [sda] Mode Sense: b3 00 00 08 [ 32.283374] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.284064] sd 3:0:0:0: [sda] 585937500 512-byte hardware sectors (300000 MB) [ 32.286875] sd 3:0:0:0: [sda] Write Protect is off [ 32.286939] sd 3:0:0:0: [sda] Mode Sense: b3 00 00 08 [ 32.288223] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.288309] sda: sda1 sda2 [ 32.291443] sd 3:0:0:0: [sda] Attached SCSI disk [ 32.292539] sd 3:0:1:0: [sdb] 585937500 512-byte hardware sectors (300000 MB) [ 32.295345] sd 3:0:1:0: [sdb] Write Protect is off [ 32.295409] sd 3:0:1:0: [sdb] Mode Sense: b3 00 00 08 [ 32.296692] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.297342] sd 3:0:1:0: [sdb] 585937500 512-byte hardware sectors (300000 MB) [ 32.300151] sd 3:0:1:0: [sdb] Write Protect is off [ 32.300217] sd 3:0:1:0: [sdb] Mode Sense: b3 00 00 08 [ 32.301490] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.301575] sdb: sdb1 sdb2 [ 32.304018] sd 3:0:1:0: [sdb] Attached SCSI disk [ 32.305119] sd 3:0:2:0: [sdc] 585937500 512-byte hardware sectors (300000 MB) [ 32.307948] sd 3:0:2:0: [sdc] Write Protect is off [ 32.308013] sd 3:0:2:0: [sdc] Mode Sense: b3 00 00 08 [ 32.309297] sd 3:0:2:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.309940] sd 3:0:2:0: [sdc] 585937500 512-byte hardware sectors (300000 MB) [ 32.312733] sd 3:0:2:0: [sdc] Write Protect is off [ 32.312799] sd 3:0:2:0: [sdc] Mode Sense: b3 00 00 08 [ 32.314130] sd 3:0:2:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.314214] sdc: sdc1 sdc2 [ 32.318452] sd 3:0:2:0: [sdc] Attached SCSI disk [ 32.319538] sd 3:0:3:0: [sdd] 585937500 512-byte hardware sectors (300000 MB) [ 32.322352] sd 3:0:3:0: [sdd] Write Protect is off [ 32.322416] sd 3:0:3:0: [sdd] Mode Sense: b3 00 00 08 [ 32.323699] sd 3:0:3:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.324341] sd 3:0:3:0: [sdd] 585937500 512-byte hardware sectors (300000 MB) [ 32.327152] sd 3:0:3:0: [sdd] Write Protect is off [ 32.327217] sd 3:0:3:0: [sdd] Mode Sense: b3 00 00 08 [ 32.328498] sd 3:0:3:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.328585] sdd: sdd1 sdd2 [ 32.332610] sd 3:0:3:0: [sdd] Attached SCSI disk [ 32.333711] sd 3:0:4:0: [sde] 585937500 512-byte hardware sectors (300000 MB) [ 32.336513] sd 3:0:4:0: [sde] Write Protect is off [ 32.336578] sd 3:0:4:0: [sde] Mode Sense: b3 00 00 08 [ 32.337864] sd 3:0:4:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.338504] sd 3:0:4:0: [sde] 585937500 512-byte hardware sectors (300000 MB) [ 32.341317] sd 3:0:4:0: [sde] Write Protect is off [ 32.341381] sd 3:0:4:0: [sde] Mode Sense: b3 00 00 08 [ 32.342664] sd 3:0:4:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.342750] sde: sde1 sde2 [ 32.347933] sd 3:0:4:0: [sde] Attached SCSI disk [ 32.349027] sd 3:0:5:0: [sdf] 585937500 512-byte hardware sectors (300000 MB) [ 32.351825] sd 3:0:5:0: [sdf] Write Protect is off [ 32.351890] sd 3:0:5:0: [sdf] Mode Sense: b3 00 00 08 [ 32.353169] sd 3:0:5:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.355024] sd 3:0:5:0: [sdf] 585937500 512-byte hardware sectors (300000 MB) [ 32.357821] sd 3:0:5:0: [sdf] Write Protect is off [ 32.357885] sd 3:0:5:0: [sdf] Mode Sense: b3 00 00 08 [ 32.359168] sd 3:0:5:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.359252] sdf: sdf1 sdf2 [ 32.365039] sd 3:0:5:0: [sdf] Attached SCSI disk [ 32.366920] scsi: waiting for bus probes to complete ... [ 35.867985] md: md0 stopped. [ 35.892652] md: bind<sdb1> [ 35.893147] md: bind<sdc1> [ 35.893479] md: bind<sda1> [ 35.893615] md: md0: raid array is not clean -- starting background reconstruction [ 35.893988] raid1: raid set md0 active with 2 out of 2 mirrors [ 35.895418] md: resync of RAID array md0 [ 35.895482] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 35.895546] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 35.895631] md: using 128k window, over a total of 14651136 blocks. [ 35.935801] EXT3-fs: INFO: recovery required on readonly filesystem. [ 35.935873] EXT3-fs: write access will be enabled during recovery. [ 36.115774] kjournald starting. Commit interval 5 seconds [ 36.115888] EXT3-fs: recovery complete. [ 36.116848] EXT3-fs: mounted filesystem with ordered data mode. [ 36.116967] VFS: Mounted root (ext3 filesystem) readonly. [ 36.117031] Trying to move old root to /initrd ... okay [ 36.157621] Freeing unused kernel memory: 6116k freed [ 37.608836] Uniform Multi-Platform E-IDE driver [ 37.621007] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 37.621016] Copyright (c) 1999-2006 Intel Corporation. [ 37.935157] e1000: 0000:01:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:6f:8e:9e [ 38.175107] usbcore: registered new interface driver usbfs [ 38.175214] usbcore: registered new interface driver hub [ 38.193017] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 38.193165] sd 3:0:1:0: Attached scsi generic sg1 type 0 [ 38.193307] sd 3:0:2:0: Attached scsi generic sg2 type 0 [ 38.193449] sd 3:0:3:0: Attached scsi generic sg3 type 0 [ 38.193593] sd 3:0:4:0: Attached scsi generic sg4 type 0 [ 38.193736] sd 3:0:5:0: Attached scsi generic sg5 type 0 [ 38.193887] scsi 3:0:6:0: Attached scsi generic sg6 type 3 [ 38.235471] usbcore: registered new device driver usb [ 38.269159] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 38.280060] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 38.280069] e100: Copyright(c) 1999-2006 Intel Corporation [ 38.296991] piix: 450NX errata present, disabling IDE DMA. [ 38.297003] piix: A BIOS update may resolve this. [ 38.459851] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 38.483980] e100 0000:00:09.0: PME# disabled [ 38.657629] e100: eth1: e100_probe: addr 0xfa100000, irq 10, MAC addr 00:02:b3:08:a0:68 [ 38.657895] piix4_smbus 0000:00:0c.3: SMBus Host Controller at 0xcc0, revision 0 [ 38.658035] piix 0000:00:10.0: IDE controller (0x8086:0x84ca rev 0x03) [ 38.658061] piix 0000:00:10.0: device not capable of full native PCI mode [ 38.658069] piix 0000:00:10.0: device disabled (BIOS) [ 38.734420] eepro100.c:v1.09j-t 9/29/99 Donald Becker [ 38.734425] eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others [ 38.742347] USB Universal Host Controller Interface driver v3.0 [ 38.742551] uhci_hcd 0000:00:0c.2: UHCI Host Controller [ 38.742691] uhci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 1 [ 38.742743] uhci_hcd 0000:00:0c.2: irq 15, io base 0x00002440 [ 38.743393] usb usb1: configuration #1 chosen from 1 choice [ 38.743503] hub 1-0:1.0: USB hub found [ 38.743526] hub 1-0:1.0: 2 ports detected [ 38.844675] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 38.844688] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 38.844696] usb usb1: Product: UHCI Host Controller [ 38.844703] usb usb1: Manufacturer: Linux 2.6.27.31-1 uhci_hcd [ 38.844709] usb usb1: SerialNumber: 0000:00:0c.2 [ 39.806488] EXT3 FS on md0, internal journal [ 40.243241] md: md1 stopped. [ 40.303699] md: bind<sdd1> [ 40.304014] md: bind<sdf1> [ 40.304300] md: bind<sde1> [ 40.311908] raid1: raid set md1 active with 2 out of 2 mirrors [ 40.315430] md: md2 stopped. [ 40.371125] md: bind<sdb2> [ 40.372718] md: bind<sdc2> [ 40.373983] md: bind<sdd2> [ 40.374305] md: bind<sde2> [ 40.375607] md: bind<sdf2> [ 40.375974] md: bind<sda2> [ 40.376100] md: md2: raid array is not clean -- starting background reconstruction [ 40.394284] md: raid10 personality registered for level 10 [ 40.395455] raid10: raid set md2 active with 6 out of 6 devices [ 40.409200] md: delaying resync of md2 until md0 has finished (they share one or more physical units) [ 40.710194] kjournald starting. Commit interval 5 seconds [ 40.714142] EXT3 FS on md1, internal journal [ 40.714158] EXT3-fs: mounted filesystem with ordered data mode. [ 40.799280] SGI XFS with ACLs, security attributes, large block numbers, no debug enabled [ 40.803497] SGI XFS Quota Management subsystem [ 40.804921] Filesystem "md2": Disabling barriers, trial barrier write failed [ 40.809749] XFS mounting filesystem md2 [ 40.963163] Starting XFS recovery on filesystem: md2 (logdev: internal) [ 41.181795] Ending XFS recovery on filesystem: md2 (logdev: internal) [ 42.252799] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 42.275605] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 42.276359] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 52.217084] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0) [ 52.406426] eth0: no IPv6 routers present [ 95.706099] scdp uses obsolete (PF_INET,SOCK_PACKET) [ 372.255222] md: md0: resync done. [ 372.285695] md: resync of RAID array md2 [ 372.285704] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 372.285712] md: using maximum available idle IO bandwidth (but not more than 15000 KB/sec) for resync. [ 372.285727] md: using 128k window, over a total of 834929664 blocks. [ 372.409504] RAID1 conf printout: [ 372.409522] --- wd:2 rd:2 [ 372.409532] disk 0, wo:0, o:1, dev:sda1 [ 372.409540] disk 1, wo:0, o:1, dev:sdb1
-- pozdr. Paweł Gołaszewski jid:blues<at>jabber<dot>gda<dot>pl -------------------------------------------------------------------------- If you think of MS-DOS as mono, and Windows as stereo, then Linux is Dolby Pro-Logic Surround Sound with Bass Boost and all the music is free.
| |