lkml.org 
[lkml]   [2009]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH -tip/core/rcu 1/6] Cleanups and fixes for RCU in face of heavy CPU-hotplug stress
On Tue, Aug 18, 2009 at 01:07:01PM -0700, Paul E. McKenney wrote:
> On Tue, Aug 18, 2009 at 05:26:43PM +0200, Ingo Molnar wrote:
> >
> > FYI, i've started triggering hangs in -tip testing recently, during
> > CPU hotplug tests:
> >
> > [ 57.632003] eth0: no IPv6 routers present
> > [ 103.564010] kmemleak: 29 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
> > [ 200.380003] Hangcheck: hangcheck value past margin!
> > [ 248.192003] INFO: task S99local:2974 blocked for more than 120 seconds.
> > [ 248.194532] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> > [ 248.202330] S99local D 0000000c 6256 2974 2687 0x00000000
> > [ 248.208929] 9c7ebe90 00000086 6b67ef8b 0000000c 9f25a610 81a69869 00000001 820b6990
> > [ 248.216123] 820b6990 820b6990 9c6e4c20 9c6e4eb4 82c78990 00000000 6b993559 0000000c
> > [ 248.220616] 9c7ebe90 8105f22a 9c6e4eb4 9c6e4c20 00000001 9c7ebe98 9c7ebeb4 81a65cb3
> > [ 248.229990] Call Trace:
> > [ 248.234049] [<81a69869>] ? _spin_unlock_irqrestore+0x22/0x37
> > [ 248.239769] [<8105f22a>] ? prepare_to_wait+0x48/0x4e
> > [ 248.244796] [<81a65cb3>] rcu_barrier_cpu_hotplug+0xaa/0xc9
> > [ 248.250343] [<8105f029>] ? autoremove_wake_function+0x0/0x38
> > [ 248.256063] [<81062cf2>] notifier_call_chain+0x49/0x71
> > [ 248.261263] [<81062da0>] raw_notifier_call_chain+0x11/0x13
> > [ 248.266809] [<81a0b475>] _cpu_down+0x272/0x288
> > [ 248.271316] [<81a0b4d5>] cpu_down+0x4a/0xa2
> > [ 248.275563] [<81a0c48a>] store_online+0x2a/0x5e
> > [ 248.280156] [<81a0c460>] ? store_online+0x0/0x5e
> > [ 248.284836] [<814ddc35>] sysdev_store+0x20/0x28
> > [ 248.289429] [<8112e403>] sysfs_write_file+0xb8/0xe3
> > [ 248.294369] [<8112e34b>] ? sysfs_write_file+0x0/0xe3
> > [ 248.299396] [<810e4c8f>] vfs_write+0x91/0x120
> > [ 248.303817] [<810e4dc1>] sys_write+0x40/0x65
> > [ 248.308150] [<81002d73>] sysenter_do_call+0x12/0x28
> >
> > config and bootlog attached. I'd suspect one of these patches:
> >
> > 684ca5c: rcu: Fix typo in rcu_irq_exit() comment header
> > b612ba8: rcu: Make rcupreempt_trace.c look at offline CPUs
> > 8064d54: rcu: Make preemptable RCU scan all CPUs when summing RCU counters
> > 2e59755: rcu: Simplify RCU CPU-hotplug notification
> > 799e64f: cpu hotplug: Introduce cpu_notifier() to handle !HOTPLUG_CPU case
> > 2756962: rcu: Split hierarchical RCU initialization into boot-time and CPU-online piece
> >
> > Any ideas?
>
> Gah... I thought I had fixed that one!!! I was seeing a deadlock
> where rcu_barrier_cpu_hotplug() would register the three RCU callbacks,
> then wait for them. But in some situations, it would wait for them in
> a state such that grace period could not complete. I convinced myself
> that moving the wait back from CPU_DEAD to CPU_POST_DEAD solved the
> problem.
>
> I am going to take a more bullet-proof approach, switching from the
> wait_completion() form to wait_event(), which will allow me to wait
> for the previous hotplug operation's callbacks at the beginning of the
> subsequent hotplug operation.
>
> I reserve the right to insert a short delay in the CPU-hotplug path
> outside of any locks, but would imagine that people would prefer that
> I avoid that sort of thing, at least until we have bulk CPU-hotplug
> operations.

And here is a patch that is doing well in testing thus far. (On the
other hand tip/core/rcu did fine in my testing.) I am not 100% confident
that this new patch hitting the core RCU/CPU-hotplug issue, but this
is in any case helpful in getting an RCU grace period off of the CPU
hotunplug critical path.

Feel free to test if convenient. The other thing I am considering is
moving the registering of the three rcu_migrate_head callbacks from the
CPU_DYING notifier to the CPU_POST_DEAD notifier.

Thanx, Paul

------------------------------------------------------------------------

Delay rcu_barrier() wait until beginning of next CPU-hotunplug operation.

This change moves an RCU grace period delay off of the critical path for
CPU-hotunplug operations. Since RCU callback migration is only performed
on CPU-hotunplug operations, and since the rcu_barrier() race is
provoked only by consecutive CPU-hotunplug operations, it is not
necessary to delay the end of a given CPU-hotunplug operation. We can
instead choose to delay the beginning of the next CPU-hotunplug
operation, as shown by the following patch.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
---

rcupdate.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index 8df1156..bd5d5c8 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -238,7 +238,8 @@ static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
call_rcu_bh(rcu_migrate_head, rcu_migrate_callback);
call_rcu_sched(rcu_migrate_head + 1, rcu_migrate_callback);
call_rcu(rcu_migrate_head + 2, rcu_migrate_callback);
- } else if (action == CPU_POST_DEAD) {
+ } else if (action == CPU_DOWN_PREPARE) {
+ /* Don't need to wait until next removal operation. */
/* rcu_migrate_head is protected by cpu_add_remove_lock */
wait_migrated_callbacks();
}

\
 
 \ /
  Last update: 2009-08-19 08:09    [W:0.152 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site