lkml.org 
[lkml]   [2009]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] MFD: TWL4030: Add support for TWL4030/5030 dynamic power switching
Date
The TWL4030/5030 family of multifunction devices allows board-specific
control of the the various regulators, clock and reset lines through
'scripts' that are loaded into its memory. This allows for Dynamic Power
Switching (DPS).

Implement board-independent core support for DPS that is then used by
board-specific code to load custom DPS scripts.

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: sameo@linux.intel.com
Cc: dbrownell@users.sourceforge.net
Cc: linux-omap@vger.kernel.org
---
drivers/mfd/Kconfig | 13 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/twl4030-core.c | 10 +
drivers/mfd/twl4030-power.c | 466 +++++++++++++++++++++++++++++++++++++++++++
include/linux/i2c/twl4030.h | 94 ++++++++-
5 files changed, 574 insertions(+), 10 deletions(-)
create mode 100644 drivers/mfd/twl4030-power.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 491ac0f..94fa9a0 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -108,6 +108,19 @@ config TWL4030_CORE
high speed USB OTG transceiver, an audio codec (on most
versions) and many other features.

+config TWL4030_POWER
+ bool "Support power resources on TWL4030 family chips"
+ depends on TWL4030_CORE
+ help
+ Say yes here if you want to use the power resources on the
+ TWL4030 family chips. Most of these resources are regulators,
+ which have a separate driver; some are control signals, such
+ as clock request handshaking.
+
+ This driver uses board-specific data to initialize the resources
+ and load scripts controling which resources are switched off/on
+ or reset when a sleep, wakeup or warm reset event occurs.
+
config MFD_TMIO
bool
default n
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 6f8a9a1..84b9eda 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_TPS65010) += tps65010.o
obj-$(CONFIG_MENELAUS) += menelaus.o

obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o
+obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o

obj-$(CONFIG_MFD_CORE) += mfd-core.o

diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index ca54996..28a45a3 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -89,6 +89,12 @@
#define twl_has_madc() false
#endif

+#ifdef CONFIG_TWL4030_POWER
+#define twl_has_power() true
+#else
+#define twl_has_power() false
+#endif
+
#if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE)
#define twl_has_rtc() true
#else
@@ -788,6 +794,10 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
/* setup clock framework */
clocks_init(&client->dev);

+ /* load power event scripts */
+ if (twl_has_power() && pdata->power)
+ twl4030_power_init(pdata->power);
+
/* Maybe init the T2 Interrupt subsystem */
if (client->irq
&& pdata->irq_base
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
new file mode 100644
index 0000000..e7688b0
--- /dev/null
+++ b/drivers/mfd/twl4030-power.c
@@ -0,0 +1,466 @@
+/*
+ * linux/drivers/i2c/chips/twl4030-power.c
+ *
+ * Handle TWL4030 Power initialization
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2006 Texas Instruments, Inc
+ *
+ * Written by Kalle Jokiniemi
+ * Peter De Schrijver <peter.de-schrijver@nokia.com>
+ * Several fixes by Amit Kucheria <amit.kucheria@verdurent.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+static u8 twl4030_start_script_address = 0x2b;
+
+#define PWR_P1_SW_EVENTS 0x10
+#define PWR_DEVOFF (1<<0)
+
+#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36)
+#define PHY_TO_OFF_PM_RECEIVER(p) (p - 0x5b)
+
+/* resource - hfclk */
+#define R_HFCLKOUT_DEV_GRP PHY_TO_OFF_PM_RECEIVER(0xe6)
+
+/* PM events */
+#define R_P1_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x46)
+#define R_P2_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x47)
+#define R_P3_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x48)
+#define R_CFG_P1_TRANSITION PHY_TO_OFF_PM_MASTER(0x36)
+#define R_CFG_P2_TRANSITION PHY_TO_OFF_PM_MASTER(0x37)
+#define R_CFG_P3_TRANSITION PHY_TO_OFF_PM_MASTER(0x38)
+
+#define LVL_WAKEUP 0x08
+
+#define ENABLE_WARMRESET (1<<4)
+
+#define END_OF_SCRIPT 0x3f
+
+#define R_SEQ_ADD_A2S PHY_TO_OFF_PM_MASTER(0x55)
+#define R_SEQ_ADD_S2A12 PHY_TO_OFF_PM_MASTER(0x56)
+#define R_SEQ_ADD_S2A3 PHY_TO_OFF_PM_MASTER(0x57)
+#define R_SEQ_ADD_WARM PHY_TO_OFF_PM_MASTER(0x58)
+#define R_MEMORY_ADDRESS PHY_TO_OFF_PM_MASTER(0x59)
+#define R_MEMORY_DATA PHY_TO_OFF_PM_MASTER(0x5a)
+
+#define R_PROTECT_KEY 0x0E
+#define KEY_1 0xC0
+#define KEY_2 0x0C
+
+/* resource configuration registers */
+
+#define DEVGROUP_OFFSET 0
+#define TYPE_OFFSET 1
+
+/* Bit positions */
+#define DEVGROUP_SHIFT 5
+#define DEVGROUP_MASK (7 << DEVGROUP_SHIFT)
+#define TYPE_SHIFT 0
+#define TYPE_MASK (7 << TYPE_SHIFT)
+#define TYPE2_SHIFT 3
+#define TYPE2_MASK (3 << TYPE2_SHIFT)
+
+static u8 res_config_addrs[] = {
+ [RES_VAUX1] = 0x17,
+ [RES_VAUX2] = 0x1b,
+ [RES_VAUX3] = 0x1f,
+ [RES_VAUX4] = 0x23,
+ [RES_VMMC1] = 0x27,
+ [RES_VMMC2] = 0x2b,
+ [RES_VPLL1] = 0x2f,
+ [RES_VPLL2] = 0x33,
+ [RES_VSIM] = 0x37,
+ [RES_VDAC] = 0x3b,
+ [RES_VINTANA1] = 0x3f,
+ [RES_VINTANA2] = 0x43,
+ [RES_VINTDIG] = 0x47,
+ [RES_VIO] = 0x4b,
+ [RES_VDD1] = 0x55,
+ [RES_VDD2] = 0x63,
+ [RES_VUSB_1V5] = 0x71,
+ [RES_VUSB_1V8] = 0x74,
+ [RES_VUSB_3V1] = 0x77,
+ [RES_VUSBCP] = 0x7a,
+ [RES_REGEN] = 0x7f,
+ [RES_NRES_PWRON] = 0x82,
+ [RES_CLKEN] = 0x85,
+ [RES_SYSEN] = 0x88,
+ [RES_HFCLKOUT] = 0x8b,
+ [RES_32KCLKOUT] = 0x8e,
+ [RES_RESET] = 0x91,
+ [RES_Main_Ref] = 0x94,
+};
+
+static int __init twl4030_write_script_byte(u8 address, u8 byte)
+{
+ int err;
+
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_MEMORY_ADDRESS);
+ if (err)
+ goto out;
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, byte,
+ R_MEMORY_DATA);
+out:
+ return err;
+}
+
+static int __init twl4030_write_script_ins(u8 address, u16 pmb_message,
+ u8 delay, u8 next)
+{
+ int err;
+
+ address *= 4;
+ err = twl4030_write_script_byte(address++, pmb_message >> 8);
+ if (err)
+ goto out;
+ err = twl4030_write_script_byte(address++, pmb_message & 0xff);
+ if (err)
+ goto out;
+ err = twl4030_write_script_byte(address++, delay);
+ if (err)
+ goto out;
+ err = twl4030_write_script_byte(address++, next);
+out:
+ return err;
+}
+
+static int __init twl4030_write_script(u8 address, struct twl4030_ins *script,
+ int len)
+{
+ int err;
+
+ for (; len; len--, address++, script++) {
+ if (len == 1) {
+ err = twl4030_write_script_ins(address,
+ script->pmb_message,
+ script->delay,
+ END_OF_SCRIPT);
+ if (err)
+ break;
+ } else {
+ err = twl4030_write_script_ins(address,
+ script->pmb_message,
+ script->delay,
+ address + 1);
+ if (err)
+ break;
+ }
+ }
+ return err;
+}
+
+static int __init twl4030_config_wakeup3_sequence(u8 address)
+{
+ int err;
+ u8 data;
+
+ /* Set SLEEP to ACTIVE SEQ address for P3 */
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_SEQ_ADD_S2A3);
+ if (err)
+ goto out;
+
+ /* P3 LVL_WAKEUP should be on LEVEL */
+ err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+ R_P3_SW_EVENTS);
+ if (err)
+ goto out;
+ data |= LVL_WAKEUP;
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
+ R_P3_SW_EVENTS);
+out:
+ if (err)
+ pr_err("TWL4030 wakeup sequence for P3 config error\n");
+ return err;
+}
+
+static int __init twl4030_config_wakeup12_sequence(u8 address)
+{
+ int err = 0;
+ u8 data;
+
+ /* Set SLEEP to ACTIVE SEQ address for P1 and P2 */
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_SEQ_ADD_S2A12);
+ if (err)
+ goto out;
+
+ /* P1/P2 LVL_WAKEUP should be on LEVEL */
+ err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+ R_P1_SW_EVENTS);
+ if (err)
+ goto out;
+
+ data |= LVL_WAKEUP;
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
+ R_P1_SW_EVENTS);
+ if (err)
+ goto out;
+
+ err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+ R_P2_SW_EVENTS);
+ if (err)
+ goto out;
+
+ data |= LVL_WAKEUP;
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
+ R_P2_SW_EVENTS);
+ if (err)
+ goto out;
+
+ if (machine_is_omap_3430sdp() || machine_is_omap_ldp()) {
+ /* Disabling AC charger effect on sleep-active transitions */
+ err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+ R_CFG_P1_TRANSITION);
+ if (err)
+ goto out;
+ data &= ~(1<<1);
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data ,
+ R_CFG_P1_TRANSITION);
+ if (err)
+ goto out;
+ }
+
+out:
+ if (err)
+ pr_err("TWL4030 wakeup sequence for P1 and P2" \
+ "config error\n");
+ return err;
+}
+
+static int __init twl4030_config_sleep_sequence(u8 address)
+{
+ int err;
+
+ /* Set ACTIVE to SLEEP SEQ address in T2 memory*/
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_SEQ_ADD_A2S);
+
+ if (err)
+ pr_err("TWL4030 sleep sequence config error\n");
+
+ return err;
+}
+
+static int __init twl4030_config_warmreset_sequence(u8 address)
+{
+ int err;
+ u8 rd_data;
+
+ /* Set WARM RESET SEQ address for P1 */
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_SEQ_ADD_WARM);
+ if (err)
+ goto out;
+
+ /* P1/P2/P3 enable WARMRESET */
+ err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+ R_P1_SW_EVENTS);
+ if (err)
+ goto out;
+
+ rd_data |= ENABLE_WARMRESET;
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+ R_P1_SW_EVENTS);
+ if (err)
+ goto out;
+
+ err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+ R_P2_SW_EVENTS);
+ if (err)
+ goto out;
+
+ rd_data |= ENABLE_WARMRESET;
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+ R_P2_SW_EVENTS);
+ if (err)
+ goto out;
+
+ err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+ R_P3_SW_EVENTS);
+ if (err)
+ goto out;
+
+ rd_data |= ENABLE_WARMRESET;
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+ R_P3_SW_EVENTS);
+out:
+ if (err)
+ pr_err("TWL4030 warmreset seq config error\n");
+ return err;
+}
+
+static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig)
+{
+ int rconfig_addr;
+ int err;
+ u8 type;
+ u8 grp;
+
+ if (rconfig->resource > TOTAL_RESOURCES) {
+ pr_err("TWL4030 Resource %d does not exist\n",
+ rconfig->resource);
+ return -EINVAL;
+ }
+
+ rconfig_addr = res_config_addrs[rconfig->resource];
+
+ /* Set resource group */
+ err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &grp,
+ rconfig_addr + DEVGROUP_OFFSET);
+ if (err) {
+ pr_err("TWL4030 Resource %d group could not be read\n",
+ rconfig->resource);
+ return err;
+ }
+
+ if (rconfig->devgroup >= 0) {
+ grp &= ~DEVGROUP_MASK;
+ grp |= rconfig->devgroup << DEVGROUP_SHIFT;
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+ grp, rconfig_addr + DEVGROUP_OFFSET);
+ if (err < 0) {
+ pr_err("TWL4030 failed to program devgroup\n");
+ return err;
+ }
+ }
+
+ /* Set resource types */
+ err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type,
+ rconfig_addr + TYPE_OFFSET);
+ if (err < 0) {
+ pr_err("TWL4030 Resource %d type could not be read\n",
+ rconfig->resource);
+ return err;
+ }
+
+ if (rconfig->type >= 0) {
+ type &= ~TYPE_MASK;
+ type |= rconfig->type << TYPE_SHIFT;
+ }
+
+ if (rconfig->type2 >= 0) {
+ type &= ~TYPE2_MASK;
+ type |= rconfig->type2 << TYPE2_SHIFT;
+ }
+
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+ type, rconfig_addr + TYPE_OFFSET);
+ if (err < 0) {
+ pr_err("TWL4030 failed to program resource type\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static int __init load_twl4030_script(struct twl4030_script *tscript,
+ u8 address)
+{
+ int err;
+
+ /* Make sure the script isn't going beyond last valid address (0x3f) */
+ if ((address + tscript->size) > END_OF_SCRIPT) {
+ pr_err("TWL4030 scripts too big error\n");
+ return -EINVAL;
+ }
+
+ err = twl4030_write_script(address, tscript->script, tscript->size);
+ if (err)
+ goto out;
+
+ if (tscript->flags & TWL4030_WRST_SCRIPT) {
+ err = twl4030_config_warmreset_sequence(address);
+ if (err)
+ goto out;
+ }
+ if (tscript->flags & TWL4030_WAKEUP12_SCRIPT) {
+ err = twl4030_config_wakeup12_sequence(address);
+ if (err)
+ goto out;
+ }
+ if (tscript->flags & TWL4030_WAKEUP3_SCRIPT) {
+ err = twl4030_config_wakeup3_sequence(address);
+ if (err)
+ goto out;
+ }
+ if (tscript->flags & TWL4030_SLEEP_SCRIPT)
+ err = twl4030_config_sleep_sequence(address);
+out:
+ return err;
+}
+
+void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
+{
+ int err = 0;
+ int i;
+ struct twl4030_resconfig *resconfig;
+ u8 address = twl4030_start_script_address;
+
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_1,
+ R_PROTECT_KEY);
+ if (err)
+ goto unlock;
+
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_2,
+ R_PROTECT_KEY);
+ if (err)
+ goto unlock;
+
+ for (i = 0; i < twl4030_scripts->num; i++) {
+ err = load_twl4030_script(twl4030_scripts->scripts[i], address);
+ if (err)
+ goto load;
+ address += twl4030_scripts->scripts[i]->size;
+ }
+
+ resconfig = twl4030_scripts->resource_config;
+ if (resconfig) {
+ while (resconfig->resource) {
+ err = twl4030_configure_resource(resconfig);
+ if (err)
+ goto resource;
+ resconfig++;
+
+ }
+ }
+
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY);
+ if (err)
+ pr_err("TWL4030 Unable to relock registers\n");
+ return;
+
+unlock:
+ if (err)
+ pr_err("TWL4030 Unable to unlock registers\n");
+ return;
+load:
+ if (err)
+ pr_err("TWL4030 failed to load scripts\n");
+ return;
+resource:
+ if (err)
+ pr_err("TWL4030 failed to configure resource\n");
+ return;
+}
diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
index 0dc80ef..d0c24ad 100644
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -220,19 +220,28 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);

/* Power bus message definitions */

-#define DEV_GRP_NULL 0x0
-#define DEV_GRP_P1 0x1
-#define DEV_GRP_P2 0x2
-#define DEV_GRP_P3 0x4
+/* The TWL4030/5030 splits its power-management resources (the various
+ * regulators, clock and reset lines) into 3 processor groups - P1, P2 and
+ * P3. These groups can then be configured to transition between sleep, wait-on
+ * and active states by sending messages to the power bus. See Section 5.4.2
+ * Power Resources of TWL4030 TRM
+ */

-#define RES_GRP_RES 0x0
-#define RES_GRP_PP 0x1
-#define RES_GRP_RC 0x2
+/* Processor groups */
+#define DEV_GRP_NULL 0x0
+#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */
+#define DEV_GRP_P2 0x2 /* P2: all Modem devices */
+#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */
+
+/* Resource groups */
+#define RES_GRP_RES 0x0 /* Reserved */
+#define RES_GRP_PP 0x1 /* Power providers */
+#define RES_GRP_RC 0x2 /* Reset and control */
#define RES_GRP_PP_RC 0x3
-#define RES_GRP_PR 0x4
+#define RES_GRP_PR 0x4 /* Power references */
#define RES_GRP_PP_PR 0x5
#define RES_GRP_RC_PR 0x6
-#define RES_GRP_ALL 0x7
+#define RES_GRP_ALL 0x7 /* All resource groups */

#define RES_TYPE2_R0 0x0

@@ -243,6 +252,41 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
#define RES_STATE_SLEEP 0x8
#define RES_STATE_OFF 0x0

+/* Power resources */
+
+/* Power providers */
+#define RES_VAUX1 1
+#define RES_VAUX2 2
+#define RES_VAUX3 3
+#define RES_VAUX4 4
+#define RES_VMMC1 5
+#define RES_VMMC2 6
+#define RES_VPLL1 7
+#define RES_VPLL2 8
+#define RES_VSIM 9
+#define RES_VDAC 10
+#define RES_VINTANA1 11
+#define RES_VINTANA2 12
+#define RES_VINTDIG 13
+#define RES_VIO 14
+#define RES_VDD1 15
+#define RES_VDD2 16
+#define RES_VUSB_1V5 17
+#define RES_VUSB_1V8 18
+#define RES_VUSB_3V1 19
+#define RES_VUSBCP 20
+#define RES_REGEN 21
+/* Reset and control */
+#define RES_NRES_PWRON 22
+#define RES_CLKEN 23
+#define RES_SYSEN 24
+#define RES_HFCLKOUT 25
+#define RES_32KCLKOUT 26
+#define RES_RESET 27
+/* Power Reference */
+#define RES_Main_Ref 28
+
+#define TOTAL_RESOURCES 28
/*
* Power Bus Message Format ... these can be sent individually by Linux,
* but are usually part of downloaded scripts that are run when various
@@ -320,6 +364,36 @@ struct twl4030_usb_data {
enum twl4030_usb_mode usb_mode;
};

+struct twl4030_ins {
+ u16 pmb_message;
+ u8 delay;
+};
+
+struct twl4030_script {
+ struct twl4030_ins *script;
+ unsigned size;
+ u8 flags;
+#define TWL4030_WRST_SCRIPT (1<<0)
+#define TWL4030_WAKEUP12_SCRIPT (1<<1)
+#define TWL4030_WAKEUP3_SCRIPT (1<<2)
+#define TWL4030_SLEEP_SCRIPT (1<<3)
+};
+
+struct twl4030_resconfig {
+ u8 resource;
+ u8 devgroup; /* Processor group that Power resource belongs to */
+ u8 type; /* Power resource addressed, 6 / broadcast message */
+ u8 type2; /* Power resource addressed, 3 / broadcast message */
+};
+
+struct twl4030_power_data {
+ struct twl4030_script **scripts;
+ unsigned num;
+ struct twl4030_resconfig *resource_config;
+};
+
+extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts);
+
struct twl4030_platform_data {
unsigned irq_base, irq_end;
struct twl4030_bci_platform_data *bci;
@@ -327,6 +401,7 @@ struct twl4030_platform_data {
struct twl4030_madc_platform_data *madc;
struct twl4030_keypad_data *keypad;
struct twl4030_usb_data *usb;
+ struct twl4030_power_data *power;

/* LDO regulators */
struct regulator_init_data *vdac;
@@ -357,7 +432,6 @@ int twl4030_sih_setup(int module);
#define TWL4030_VAUX3_DEV_GRP 0x1F
#define TWL4030_VAUX3_DEDICATED 0x22

-
#if defined(CONFIG_TWL4030_BCI_BATTERY) || \
defined(CONFIG_TWL4030_BCI_BATTERY_MODULE)
extern int twl4030charger_usb_en(int enable);
--
1.6.3.3


\
 
 \ /
  Last update: 2009-08-17 16:05    [W:0.098 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site