lkml.org 
[lkml]   [2009]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: I2C -bus programming
Copied to i2c mailing list.

> Dear List,
>
> this is my first post here and I am not sure if this is a suitable topic
> here. Anyway I have a Velleman K8000 IO-card and it uses I2C over
> parallel port to communicate.
>
> when I modprobe i2c-parport it does not complain. I tested without card
> connected and it complained so it seems to find the card.
>
> modprobe pcf8591
>
> modprobe i2c-core
>
> modprobe i2c-dev
>
> I am not sure I am doing it right. Should i2c-core probed first ?
>
> anyway now I have
>
> /dev/i2c-0 /dev/i2c-1
>
> Now I don't know whether these i2c-devices refer to this Velleman board
> or some other i2c-device which happen to be in the computer...
>
> If these devices probably refer to Velleman - then how I can refer
> different i2c-devices on the board.
>
>
> I am totally new to this i2c thing (reading spec at the moment but it
> does not help much with Linux).
>
> I would be very greatfull if some could point me the way - thanks.
>
> Best Regards
> Kari Laine
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>



\
 
 \ /
  Last update: 2009-08-14 13:45    [W:0.040 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site