lkml.org 
[lkml]   [2009]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/5] [input] add mc13783 touchscreen driver
On Wed, Aug 12, 2009 at 09:04:38AM -0700, Dmitry Torokhov wrote:
> On Wed, Aug 12, 2009 at 05:05:28PM +0200, Sascha Hauer wrote:
> > This driver provides support for the touchscreen interface
> > integrated into the Freescale MC13783.
> >
> > changes since v1:
> >
> > - remove unused functions
> > - use queue_delayed_work instead of queue_work
> > - report pen events as BTN_TOUCH instead of ABS_PRESSURE
> > - handle interrupt registration in open/close functions
> > - do not call input_free_device() on already registered
> > input_device
> > - use platform_driver_probe instead of platform_driver_register
>
> BTW, if you are using platform_driver_probe() then __init is OK for
> .probe() because all probes will only be run once, when driver loads.
> IIRC the ability to discard probe() code was the main reason for
> introducing platform_driver_probe().

But __devinit should be ok also, right?

>
> > +
> > + /* unmask the ts wakeup interrupt */
> > + mc13783_set_bits(priv->mc13783, MC13783_REG_INTERRUPT_MASK_0,
> > + MC13783_INT_MASK_TSM, 0);
> > +
> > + mc13783_adc_set_ts_status(priv->mc13783, 1);
> > +
>
> I actually expected these bits to go into ->open(); not the request IRQ
> stuff...

Yes I know, I just found it convenient to request the interrupts there
so that we do not risk getting interrupts nobody is interested in this
moment.

Sascha

--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |


\
 
 \ /
  Last update: 2009-08-13 14:53    [W:0.135 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site