lkml.org 
[lkml]   [2009]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] MFD: TWL4030: print warning for out-of-order script loading
Date
When the sleep script is loaded before the wakeup script, there is a
chance that the system might go to sleep before the wakeup script
loading is completed. This will lead to a system that does not wakeup
and has been observed to cause non-booting boards.

Various options were considered to solve this problem, including
modification of the core twl4030 power code to be smart enough to
reorder the loading of the scripts. But it felt too over-engineered.

Hence this patch just warns the DPS script developer so that they may be
reordered in the board-code itself.

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
---
drivers/mfd/twl4030-power.c | 11 +++++++++--
1 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index bb9e45f..ef4cc4e 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -315,6 +315,7 @@ static int __init load_triton_script(struct twl4030_script *tscript)
{
u8 address = triton_next_free_address;
int err;
+ static u8 mask = 0;

/* Make sure the script isn't going beyond last valid address */
if ((address + tscript->size) > (END_OF_SCRIPT-1)) {
@@ -331,14 +332,20 @@ static int __init load_triton_script(struct twl4030_script *tscript)
if (tscript->flags & TRITON_WRST_SCRIPT)
err |= config_warmreset_sequence(address);

- if (tscript->flags & TRITON_WAKEUP12_SCRIPT)
+ if (tscript->flags & TRITON_WAKEUP12_SCRIPT) {
err |= config_wakeup12_sequence(address);
+ mask |= TRITON_WAKEUP12_SCRIPT;
+ }

if (tscript->flags & TRITON_WAKEUP3_SCRIPT)
err |= config_wakeup3_sequence(address);

- if (tscript->flags & TRITON_SLEEP_SCRIPT)
+ if (tscript->flags & TRITON_SLEEP_SCRIPT) {
+ if (!(mask & TRITON_WAKEUP12_SCRIPT))
+ printk(KERN_WARNING
+ "TWL4030: Wakeup script not yet loaded. Might lead to boot failure on some boards\n");
err |= config_sleep_sequence(address);
+ }

return err;
}
--
1.6.3.3


\
 
 \ /
  Last update: 2009-07-08 12:53    [W:0.043 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site