lkml.org 
[lkml]   [2009]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] p54: Fix regression in 2.6.31-rcX since commit a1091aa - sleeping function called from invalid context
Beginning with commit a1091aae19b1d9c85d91c86915a611387f67a26b entitled
"p54: Use SKB list handling helpers instead of by-hand code.", the following
appears in my logs whenever I try to use my p54usb wireless device:

BUG: sleeping function called from invalid context at arch/x86/mm/fault.c:1085
in_atomic(): 0, irqs_disabled(): 1, pid: 8538, name: modprobe
2 locks held by modprobe/8538:
#0: (&local->queue_stop_reason_lock){-.-...}, at: [<ffffffffa023b99f>]
ieee80211_stop_queues_by_reason+0x28/0x5e [mac80211]
#1: (&mm->mmap_sem){++++++}, at: [<ffffffff80225a4f>] do_page_fault+0xd2/0x1fe
irq event stamp: 25212
hardirqs last enabled at (25211): [<ffffffff80451f28>] _spin_unlock_irqrestore+0x3f/0x47
hardirqs last disabled at (25212): [<ffffffff804520e3>] _spin_lock_irqsave+0x17/0x4b
softirqs last enabled at (24064): [<ffffffff803e9997>] sk_filter+0xba/0xc3
softirqs last disabled at (24062): [<ffffffff803e98f3>] sk_filter+0x16/0xc3
Pid: 8538, comm: modprobe Not tainted 2.6.30-rc6-Linus-00905-g46c3767-dirty #180
Call Trace:
[<ffffffff8025af90>] ? print_irqtrace_events+0xd0/0xd4
[<ffffffff80233384>] __might_sleep+0xf4/0xf6
[<ffffffff80225a99>] do_page_fault+0x11c/0x1fe
[<ffffffff80451f28>] ? _spin_unlock_irqrestore+0x3f/0x47
[<ffffffff804525cf>] page_fault+0x1f/0x30
[<ffffffff80451f28>] ? _spin_unlock_irqrestore+0x3f/0x47
[<ffffffffa023b99f>] ? ieee80211_stop_queues_by_reason+0x28/0x5e [mac80211]
[<ffffffffa023b92b>] ? __ieee80211_stop_queue+0x36/0x82 [mac80211]
[<ffffffff8045210b>] ? _spin_lock_irqsave+0x3f/0x4b
[<ffffffffa023b9b3>] ieee80211_stop_queues_by_reason+0x3c/0x5e [mac80211]
[<ffffffffa023b9e0>] ieee80211_stop_queues+0xb/0xd [mac80211]
[<ffffffffa047c35c>] p54_assign_address+0x164/0x1ec [p54common]
[<ffffffffa047c49a>] p54_alloc_skb+0xb6/0xd3 [p54common]
...

Reverting the hunk that affects p54_assign_address() fixes the problem. When I
tried to determine which change(s) caused the problem, the skb_peek_tail()
seemed to be the problem; however, the system would freeze. I was not able to
recover any log information.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
---

diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index b618bd1..c5bc55a 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -1164,21 +1164,23 @@ static int p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb,
}
}

- skb_queue_walk(&priv->tx_queue, entry) {
+ entry = priv->tx_queue.next;
+ while (left--) {
u32 hole_size;
info = IEEE80211_SKB_CB(entry);
range = (void *)info->rate_driver_data;
hole_size = range->start_addr - last_addr;
if (!target_skb && hole_size >= len) {
- target_skb = skb_queue_prev(&priv->tx_queue, entry);
+ target_skb = entry->prev;
hole_size -= len;
target_addr = last_addr;
}
largest_hole = max(largest_hole, hole_size);
last_addr = range->end_addr;
+ entry = entry->next;
}
if (!target_skb && priv->rx_end - last_addr >= len) {
- target_skb = skb_peek_tail(&priv->tx_queue);
+ target_skb = priv->tx_queue.prev;
largest_hole = max(largest_hole, priv->rx_end - last_addr - len);
if (!skb_queue_empty(&priv->tx_queue)) {
info = IEEE80211_SKB_CB(target_skb);



\
 
 \ /
  Last update: 2009-07-06 21:09    [W:0.303 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site