lkml.org 
[lkml]   [2009]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRE: >10% performance degradation since 2.6.18
For OLTP workload we are not pushing much network throughput. Lower network latency is more important for OLTP performance. For the original Nehalem 2 sockets OLTP result in this mail thread, we bound the two NIC interrupts to cpu1 and cpu9 (one NIC per sockets). Database processes are divided into two groups and pinned to socket and each processe only received request from the NIC it bound to. This binding scheme gave us >1% performance boost pre-Nehalem date. We also see positive impact on this NHM system.
-Chinang

>-----Original Message-----
>From: Rick Jones [mailto:rick.jones2@hp.com]
>Sent: Monday, July 06, 2009 10:00 AM
>To: Herbert Xu
>Cc: Jeff Garzik; andi@firstfloor.org; arjan@infradead.org; matthew@wil.cx;
>jens.axboe@oracle.com; linux-kernel@vger.kernel.org; Styner, Douglas W; Ma,
>Chinang; Prickett, Terry O; Wilcox, Matthew R; Eric.Moore@lsi.com; DL-
>MPTFusionLinux@lsi.com; netdev@vger.kernel.org
>Subject: Re: >10% performance degradation since 2.6.18
>
>Herbert Xu wrote:
>> Jeff Garzik <jeff@garzik.org> wrote:
>>
>>>What's the best setup for power usage?
>>>What's the best setup for performance?
>>>Are they the same?
>>
>>
>> Yes.
>>
>>
>>>Is it most optimal to have the interrupt for socket $X occur on the same
>>>CPU as where the app is running?
>>
>>
>> Yes.
>
>Well... Yes, if the goal is lowest service demand/latency, but not always
>if
>the goal is to have highest throughput. For example, basic netperf TCP_RR
>between a pair of systems with NIC interrupts pinned to CPU0 for my
>convenience :)
>
>Pin netperf/netserver to CPU0 as well:
>sbs133b15:~ # netperf -H sbs133b16 -t TCP_RR -T 0 -c -C
>TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
>sbs133b16.west (10.208.1.50) port 0 AF_INET : first burst 0 : cpu bind
>Local /Remote
>Socket Size Request Resp. Elapsed Trans. CPU CPU S.dem S.dem
>Send Recv Size Size Time Rate local remote local remote
>bytes bytes bytes bytes secs. per sec % S % S us/Tr us/Tr
>
>16384 87380 1 1 10.00 16396.22 0.39 0.55 3.846 5.364
>16384 87380
>
>Now pin it to the peer thread in that same core:
>
>sbs133b15:~ # netperf -H sbs133b16 -t TCP_RR -T 8 -c -C
>TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
>sbs133b16.west (10.208.1.50) port 0 AF_INET : first burst 0 : cpu bind
>Local /Remote
>Socket Size Request Resp. Elapsed Trans. CPU CPU S.dem S.dem
>Send Recv Size Size Time Rate local remote local remote
>bytes bytes bytes bytes secs. per sec % S % S us/Tr us/Tr
>
>16384 87380 1 1 10.00 14078.23 0.67 0.87 7.604 9.863
>16384 87380
>
>Now pin it to another core in that same processor:
>
>sbs133b15:~ # netperf -H sbs133b16 -t TCP_RR -T 2 -c -C
>TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
>sbs133b16.west (10.208.1.50) port 0 AF_INET : first burst 0 : cpu bind
>Local /Remote
>Socket Size Request Resp. Elapsed Trans. CPU CPU S.dem S.dem
>Send Recv Size Size Time Rate local remote local remote
>bytes bytes bytes bytes secs. per sec % S % S us/Tr us/Tr
>
>16384 87380 1 1 10.00 14649.57 1.76 0.64 19.213 7.036
>16384 87380
>
>Certainly seems to support "run on the same core as interrupts." Now though
>lets
>look at bulk throughput:
>
>sbs133b15:~ # netperf -H sbs133b16 -T 0 -c -C
>TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to sbs133b16.west
>(10.208.1.50) port 0 AF_INET : cpu bind
>Recv Send Send Utilization Service
>Demand
>Socket Socket Message Elapsed Send Recv Send Recv
>Size Size Size Time Throughput local remote local
>remote
>bytes bytes bytes secs. 10^6bits/s % S % S us/KB
>us/KB
>
> 87380 16384 16384 10.00 9384.11 3.39 2.19 0.474
>0.306
>
>In this case, I'm running on Nehalems (two quad-cores with threads enabled)
>so I
>have enough "oomph" to hit link-rate on a classic throughput test so all
>these
>next two will show is the CPU hit and some of the run to run variablity:
>
>sbs133b15:~ # for t in 8 2; do netperf -P 0 -H sbs133b16 -T $t -c -C -B
>"bind to
>core $t"; done
> 87380 16384 16384 10.00 9383.67 4.23 5.21 0.591
>0.728
>bind to core 8
> 87380 16384 16384 10.00 9383.12 3.03 5.35 0.423
>0.747
>bind to core 2
>
>So apart from the thing on the top of my head what is my point? Let's look
>at a
>less conventional but still important case - bulk small packet throughput.
>First, find the limit for a single connection when bound to the interrupt
>core:
>
>sbs133b15:~ # for b in 0 4 16 64 128 256; do netperf -P 0 -t TCP_RR -T 0 -H
>sbs133b16 -c -C -B "$b added simultaneous trans" -- -D -b $b; done
>16384 87380 1 1 10.00 16336.52 0.69 0.91 6.715 8.944
>0
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 61324.84 2.23 2.27 5.825 5.910
>4
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 152221.78 2.81 3.49 2.956 3.664
>16
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 291247.72 4.86 5.07 2.670 2.788
>64
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 292257.59 3.99 5.91 2.183 3.236
>128
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 291734.00 5.55 5.32 3.043 2.920
>256
>added simultaneous trans
>16384 87380
>
>Now, when bound to the peer thread:
>sbs133b15:~ # for b in 0 4 16 64 128 256; do netperf -P 0 -t TCP_RR -T 8 -H
>sbs133b16 -c -C -B "$b added simultaneous trans" -- -D -b $b; done
>16384 87380 1 1 10.00 14367.40 0.78 1.75 8.652 19.477
>0
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 54820.22 2.73 4.78 7.956 13.948
>4
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 159305.92 4.61 6.84 4.627 6.874
>16
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 260227.55 6.26 8.36 3.851 5.140
>64
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 256336.50 6.23 8.00 3.891 4.993
>128
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 250543.92 6.24 6.29 3.985 4.014
>256
>added simultaneous trans
>16384 87380
>
>Things still don't look good for running on another CPU, but wait :) Bind
>to
>another core in the same processor:
>
>sbs133b15:~ # for b in 0 4 16 64 128 256; do netperf -P 0 -t TCP_RR -T 2 -H
>sbs133b16 -c -C -B "$b added simultaneous trans" -- -D -b $b; done
>16384 87380 1 1 10.00 14697.98 0.89 1.53 9.689 16.700
>0
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 58201.08 2.11 4.21 5.804 11.585
>4
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 158999.50 3.87 6.20 3.899 6.240
>16
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 379243.72 6.24 9.04 2.634 3.815
>64
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 384823.34 6.15 9.50 2.556 3.949
>128
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 375001.50 6.07 9.63 2.588 4.109
>256
>added simultaneous trans
>16384 87380
>
>When the CPU does not have enough "oomph" for link-rate 10G, then what we
>see
>above with the aggregate TCP_RR holds true for a plain TCP_STREAM test as
>well -
>getting the second core involved, while indeed increasing CPU util, also
>provides the additional cycles required to get higher thoughput. So what
>is
>optimal depends on what one wishes to optimize.
>
>>
>>>If yes, how to best handle when the scheduler moves app to another CPU?
>>>Should we reprogram the NIC hardware flow steering mechanism at that
>point?
>>
>>
>> Not really. For now the best thing to do is to pin everything
>> down and not move at all, because we can't afford to move.
>>
>> The only way for moving to work is if we had the ability to get
>> the sockets to follow the processes. That means, we must have
>> one RX queue per socket.
>
>Well, or assign sockets to per-core RX queues and be able to move them
>around.
>If it weren't for all the smarts in the NICs getting in the way :), we'd
>probably do the "lookup where the socket was last accessed and run there"
>thing
>somewhere in the inbound path a la TOPS.
>
>rick jones
>
>>
>> Cheers,



\
 
 \ /
  Last update: 2009-07-06 19:39    [W:1.030 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site