lkml.org 
[lkml]   [2009]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] regulator: Add GPIO enable control to fixed voltage regulator driver
Date
From: Roger Quadros <ext-roger.quadros@nokia.com>

Now fixed regulators that have their enable pin connected to a GPIO line
can use the fixed regulator driver. The GPIO number and polarity
information is passed through platform data. GPIO enable control
is acheived using gpiolib.

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
---
drivers/regulator/fixed.c | 60 ++++++++++++++++++++++++++++++++++++++-
include/linux/regulator/fixed.h | 7 ++++
2 files changed, 66 insertions(+), 1 deletions(-)

diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index cdc674f..4ba6a50 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -20,20 +20,51 @@
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/fixed.h>
+#include <linux/gpio.h>

struct fixed_voltage_data {
struct regulator_desc desc;
struct regulator_dev *dev;
int microvolts;
+ int use_gpio_control;
+ int gpio;
+ int enable_high;
+ int is_enabled;
};

static int fixed_voltage_is_enabled(struct regulator_dev *dev)
{
- return 1;
+ struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+ if (data->use_gpio_control)
+ return data->is_enabled;
+ else
+ return 1;
}

static int fixed_voltage_enable(struct regulator_dev *dev)
{
+ struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+ if (data->use_gpio_control) {
+ gpio_set_value(data->gpio,
+ data->enable_high ? 1 : 0);
+ data->is_enabled = 1;
+ }
+
+ return 0;
+}
+
+static int fixed_voltage_disable(struct regulator_dev *dev)
+{
+ struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+ if (data->use_gpio_control) {
+ gpio_set_value(data->gpio,
+ data->enable_high ? 0 : 1);
+ data->is_enabled = 0;
+ }
+
return 0;
}

@@ -58,6 +89,7 @@ static int fixed_voltage_list_voltage(struct regulator_dev *dev,
static struct regulator_ops fixed_voltage_ops = {
.is_enabled = fixed_voltage_is_enabled,
.enable = fixed_voltage_enable,
+ .disable = fixed_voltage_disable,
.get_voltage = fixed_voltage_get_voltage,
.list_voltage = fixed_voltage_list_voltage,
};
@@ -85,6 +117,29 @@ static int regulator_fixed_voltage_probe(struct platform_device *pdev)
drvdata->desc.n_voltages = 1;

drvdata->microvolts = config->microvolts;
+ drvdata->use_gpio_control = config->use_gpio_control;
+ if (drvdata->use_gpio_control) {
+ drvdata->gpio = config->gpio;
+ drvdata->enable_high = config->enable_high;
+
+ ret = gpio_request(config->gpio,
+ config->supply_name);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not obtain regulator " \
+ "enable GPIO %d\n", config->gpio);
+ goto err_name;
+ } else {
+ ret = gpio_direction_output(config->gpio,
+ config->enable_high ? 0 : 1);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not configure " \
+ "enable GPIO %d direction\n",
+ config->gpio);
+ gpio_free(config->gpio);
+ goto err_name;
+ }
+ }
+ }

drvdata->dev = regulator_register(&drvdata->desc, &pdev->dev,
config->init_data, drvdata);
@@ -115,6 +170,9 @@ static int regulator_fixed_voltage_remove(struct platform_device *pdev)
kfree(drvdata->desc.name);
kfree(drvdata);

+ if (drvdata->_use_gpio_control)
+ gpio_free(drvdata->gpio);
+
return 0;
}

diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
index 91b4da3..5b963cc 100644
--- a/include/linux/regulator/fixed.h
+++ b/include/linux/regulator/fixed.h
@@ -19,6 +19,13 @@ struct regulator_init_data;
struct fixed_voltage_config {
const char *supply_name;
int microvolts;
+ int use_gpio_control; /* Use GPIO enable control */
+ int gpio; /* GPIO to use for enable control */
+
+ int enable_high; /* Polarity of enable GPIO
+ * 1 = Active High, 0 = Active Low
+ */
+
struct regulator_init_data *init_data;
};

--
1.6.0.4


\
 
 \ /
  Last update: 2009-07-31 14:59    [W:0.327 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site