lkml.org 
[lkml]   [2009]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 16/22] Staging: rtl8192su: remove RTL8190_Download_Firmware_From_Header ifdefs
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH staging] Staging: rtl8192su: remove RTL8190_Download_Firmware_From_Header ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rtl8192su/Makefile | 1
drivers/staging/rtl8192su/r8192S_phy.c | 36 -----------------------------
drivers/staging/rtl8192su/r8192S_rtl6052.c | 11 --------
3 files changed, 48 deletions(-)
Index: b/drivers/staging/rtl8192su/Makefile
===================================================================
--- a/drivers/staging/rtl8192su/Makefile
+++ b/drivers/staging/rtl8192su/Makefile
@@ -8,7 +8,6 @@ EXTRA_CFLAGS += -DJACKSON_NEW_RX
EXTRA_CFLAGS += -DTHOMAS_BEACON

EXTRA_CFLAGS += -DRTL8192SU
-EXTRA_CFLAGS += -DRTL8190_Download_Firmware_From_Header=1
EXTRA_CFLAGS += -DRTL8192S_PREPARE_FOR_NORMAL_RELEASE
EXTRA_CFLAGS += -DRTL8192SU_DISABLE_IQK=1

Index: b/drivers/staging/rtl8192su/r8192S_phy.c
===================================================================
--- a/drivers/staging/rtl8192su/r8192S_phy.c
+++ b/drivers/staging/rtl8192su/r8192S_phy.c
@@ -1331,13 +1331,7 @@ extern bool PHY_MACConfig8192S(struct ne
//
// Config MAC
//
-#if RTL8190_Download_Firmware_From_Header
rtStatus = phy_ConfigMACWithHeaderFile(dev);
-#else
- // Not make sure EEPROM, add later
- RT_TRACE(COMP_INIT, "Read MACREG.txt\n");
- //rtStatus = phy_ConfigMACWithParaFile(dev, RTL819X_PHY_MACREG);// lzm del it temp
-#endif
return (rtStatus == RT_STATUS_SUCCESS) ? true:false;

}
@@ -1545,7 +1539,6 @@ phy_BB8192S_Config_ParaFile(struct net_d
// 1. Read PHY_REG.TXT BB INIT!!
// We will seperate as 1T1R/1T2R/1T2R_GREEN/2T2R
//
-#if RTL8190_Download_Firmware_From_Header
if (priv->rf_type == RF_1T2R || priv->rf_type == RF_2T2R ||
priv->rf_type == RF_1T1R ||priv->rf_type == RF_2T2R_GREEN)
{
@@ -1557,26 +1550,6 @@ phy_BB8192S_Config_ParaFile(struct net_d
}
}else
rtStatus = RT_STATUS_FAILURE;
-#else
- RT_TRACE(COMP_INIT, "RF_Type == %d\n", priv->rf_type);
- // No matter what kind of RF we always read PHY_REG.txt. We must copy different
- // type of parameter files to phy_reg.txt at first.
- if (priv->rf_type == RF_1T2R || priv->rf_type == RF_2T2R ||
- priv->rf_type == RF_1T1R ||priv->rf_type == RF_2T2R_GREEN)
- {
- rtStatus = phy_ConfigBBWithParaFile(dev, (char* )&szBBRegFile);
- if(priv->rf_type != RF_2T2R && priv->rf_type != RF_2T2R_GREEN)
- {//2008.11.10 Added by tynli. The default PHY_REG.txt we read is for 2T2R,
- //so we should reconfig BB reg with the right PHY parameters.
- if(priv->rf_type == RF_1T1R)
- rtStatus = phy_SetBBtoDiffRFWithParaFile(dev, (char* )&szBBRegto1T1RFile);
- else if(priv->rf_type == RF_1T2R)
- rtStatus = phy_SetBBtoDiffRFWithParaFile(dev, (char* )&szBBRegto1T2RFile);
- }
-
- }else
- rtStatus = RT_STATUS_FAILURE;
-#endif

if(rtStatus != RT_STATUS_SUCCESS){
RT_TRACE(COMP_INIT, "phy_BB8192S_Config_ParaFile():Write BB Reg Fail!!");
@@ -1588,11 +1561,7 @@ phy_BB8192S_Config_ParaFile(struct net_d
//
if (priv->AutoloadFailFlag == false)
{
-#if RTL8190_Download_Firmware_From_Header
rtStatus = phy_ConfigBBWithPgHeaderFile(dev,BaseBand_Config_PHY_REG);
-#else
- rtStatus = phy_ConfigBBWithPgParaFile(dev, (char* )&szBBRegPgFile);
-#endif
}
if(rtStatus != RT_STATUS_SUCCESS){
RT_TRACE(COMP_INIT, "phy_BB8192S_Config_ParaFile():BB_PG Reg Fail!!");
@@ -1602,12 +1571,7 @@ phy_BB8192S_Config_ParaFile(struct net_d
//
// 3. BB AGC table Initialization
//
-#if RTL8190_Download_Firmware_From_Header
rtStatus = phy_ConfigBBWithHeaderFile(dev,BaseBand_Config_AGC_TAB);
-#else
- RT_TRACE(COMP_INIT, "phy_BB8192S_Config_ParaFile AGC_TAB.txt\n");
- rtStatus = phy_ConfigBBWithParaFile(Adapter, (char* )&szAGCTableFile);
-#endif

if(rtStatus != RT_STATUS_SUCCESS){
printk( "phy_BB8192S_Config_ParaFile():AGC Table Fail\n");
Index: b/drivers/staging/rtl8192su/r8192S_rtl6052.c
===================================================================
--- a/drivers/staging/rtl8192su/r8192S_rtl6052.c
+++ b/drivers/staging/rtl8192su/r8192S_rtl6052.c
@@ -684,21 +684,10 @@ RT_STATUS phy_RF6052_Config_ParaFile(str
switch(eRFPath)
{
case RF90_PATH_A:
-#if RTL8190_Download_Firmware_From_Header
rtStatus= rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
-#else
- rtStatus = PHY_ConfigRFWithParaFile(Adapter, (char* )&szRadioAFile, (RF90_RADIO_PATH_E)eRFPath);
-#endif
break;
case RF90_PATH_B:
-#if RTL8190_Download_Firmware_From_Header
rtStatus= rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
-#else
- if(priv->rf_type == RF_2T2R_GREEN)
- rtStatus = PHY_ConfigRFWithParaFile(Adapter, (ps1Byte)&szRadioBGMFile, (RF90_RADIO_PATH_E)eRFPath);
- else
- rtStatus = PHY_ConfigRFWithParaFile(Adapter, (char* )&szRadioBFile, (RF90_RADIO_PATH_E)eRFPath);
-#endif
break;
case RF90_PATH_C:
break;

\
 
 \ /
  Last update: 2009-07-03 16:09    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site