[lkml]   [2009]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: [RFC] IO scheduler based IO controller V6
    Vivek Goyal wrote:
    > On Mon, Jul 27, 2009 at 10:10:34AM +0800, Gui Jianfeng wrote:
    >> Hi,
    >> Here are some fio test results for IO Controller V6 built and not built.
    >> Iozone test results are also attached.
    > Hi Gui,
    > Thanks a lot for some performance numbers. It seems to be a mixed chart.
    > Performance gains at some places and loss at others. I am curious about
    > that -7.0% for normal writes. Not sure what can contribute to that.
    > What was the value of "fairness" parameter when you ran those tests? Can you
    > please set fairness = 0 and re-run the tests (if you have already not done so).
    > By default fairness is set to 1 in V6. With fairness = 0, we should be very
    > close to existing CFQ behavior. If not, then we need to dive deeper and
    > see why variations are happening.

    Hi Vivek,

    I tested with default fairness value, i'll re-test it when fairness is set to 0.

    > Is it also possible to run the same tests with V7.


    Gui Jianfeng

    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2009-07-28 13:41    [W:0.023 / U:6.340 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site