lkml.org 
[lkml]   [2009]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH V2 25/32] omap_hsmmc: cater for weird CMD6 behaviour
From 8520f6fd74c073a76121619403808f1e3da0f587 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Sat, 16 May 2009 10:05:40 +0300
Subject: [PATCH] omap_hsmmc: cater for weird CMD6 behaviour

Sometimes the controller unexpectedly produces a TC (transfer
complete) interrupt before the CC (command complete) interrupt for
command 6 (SWITCH). This is a problem because the CC interrupt
can get mixed up with the next request. Add a hack for CMD6.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
---
drivers/mmc/host/omap_hsmmc.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index c7a6d88..5121277 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -474,6 +474,13 @@ mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
if (!data) {
struct mmc_request *mrq = host->mrq;

+ /* TC before CC from CMD6 - don't know why, but it happens */
+ if (host->cmd && host->cmd->opcode == 6 &&
+ host->response_busy) {
+ host->response_busy = 0;
+ return;
+ }
+
host->mrq = NULL;
mmc_request_done(host->mmc, mrq);
return;
--
1.5.6.3


\
 
 \ /
  Last update: 2009-07-28 12:57    [W:0.182 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site