lkml.org 
[lkml]   [2009]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] add SBC-FITPC2 watchdog driver
From
Date
On Mon, 2009-07-20 at 18:53 +0300, Mike Rapoport wrote:
> diff -Nru linux-2.6.31-rc3.orig/drivers/watchdog/sbc_fitpc2_wdt.c linux-2.6.31-rc3/drivers/watchdog/sbc_fitpc2_wdt.c
> --- linux-2.6.31-rc3.orig/drivers/watchdog/sbc_fitpc2_wdt.c 1970-01-01 02:00:00.000000000 +0200
> +++ linux-2.6.31-rc3/drivers/watchdog/sbc_fitpc2_wdt.c 2009-07-20 16:08:40.000000000 +0300

Hi. Some trivial comments below:

[]

> +static ssize_t
> +fitpc2_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
> +{
> + if (len) {
> + if (!nowayout) {
> + size_t i;

using
if (!len)
return 0;
if (nowayout) {
wdt_enable();
return 0;
}
would reduce the indent a couple of levels.

[]

> +static int fitpc2_wdt_release(struct inode *inode, struct file *file)
> +{
> + if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) {
> + wdt_disable();
> + printk(KERN_CRIT "WATCHDOG: Device disabled\n");

I think you should verify the printk KERN_CRIT uses.
This seems like this one should be KERN_INFO.

[]

> +static int __init fitpc2_wdt_init(void)
[]
> + printk(KERN_CRIT "WATCHDOG: board name is: %s. Should be SBC-FITPC2\n",
> + dmi_get_system_info(DMI_BOARD_NAME));
[]
> + printk(KERN_CRIT "WATCHDOG: I/O address 0x%04x already in use\n",
> + COMMAND_PORT);
[]
> + printk(KERN_CRIT "WATCHDOG: I/O address 0x%04x already in use\n",
> + DATA_PORT);
[]
> + printk(KERN_CRIT "WATCHDOG: margin must be in range 31 - 255"
> + " seconds, you tried to set %d\n", margin);

Maybe all of these should be KERN_ERR.

You could use:

#define pr_fmt(fmt) KBUILD_MODNAME " WATCHDOG: " fmt

and convert the printk(KERN_<level> "WATCHDOG: " etc...)
to pr_<level>(etc...)




\
 
 \ /
  Last update: 2009-07-20 18:45    [from the cache]
©2003-2011 Jasper Spaans. Advertise on this site