lkml.org 
[lkml]   [2009]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] libata: Allow AHCI to flag ports as non-hotpluggable
Date
Some SATA ports are fully internal and unlikely to be hotplugged. The
AHCI spec allows vendors to flag these ports differently, allowing
hotplug bays and eSATA ports to be treated differently. Flag ports with
this information so userspace policy decisions can be made.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
---
drivers/ata/ahci.c | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 4863da9..eda8a11 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -77,6 +77,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
size_t size);
static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
ssize_t size);
+static int ahci_is_hotplug_capable(struct ata_port *ap);

enum {
AHCI_PCI_BAR = 5,
@@ -193,6 +194,8 @@ enum {
PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
+ PORT_CMD_ESP = (1 << 21), /* port is esata capable */
+ PORT_CMD_HPCP = (1 << 18), /* port is hot plug capable */
PORT_CMD_PMP = (1 << 17), /* PMP attached */
PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
@@ -877,6 +880,15 @@ static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
return -EINVAL;
}

+static int ahci_is_hotplug_capable(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u8 cmd;
+
+ cmd = readl(port_mmio + PORT_CMD);
+ return cmd & (PORT_CMD_HPCP | PORT_CMD_ESP);
+}
+
static void ahci_start_engine(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
@@ -2378,6 +2390,9 @@ static int ahci_port_start(struct ata_port *ap)
if (!pp)
return -ENOMEM;

+ if (!ahci_is_hotplug_capable(ap))
+ ap->flags |= ATA_FLAG_NO_SATA_HOTPLUG;
+
mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma,
GFP_KERNEL);
if (!mem)
--
1.6.2.5


\
 
 \ /
  Last update: 2009-07-16 22:01    [W:0.051 / U:1.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site