lkml.org 
[lkml]   [2009]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH]: New implementation of scsi_execute_async()
On 07/09/2009 09:14 PM, Vladislav Bolkhovitin wrote:
> This patch reimplements scsi_execute_async(). In the new version it's a lot less
> hackish and also has additional features. Namely:
>
> 1. Possibility to insert commands both in tail and in head of the queue.
>
> 2. Possibility to explicitly specify if the last SG element has space for padding.
>
> This patch based on the previous patches posted by Tejun Heo. Comparing to them
> it has the following improvements:
>
> 1. It uses BIOs chaining instead of kmalloc()ing the whole bio.
>
> 2. It uses SGs chaining instead of kmalloc()ing one big SG in case if direct
> mapping failed (e.g. because of DMA alignment or padding).
>
> 3. If direct mapping failed, if possible, it copies only the last SG element,
> not the whole SG.
>
> Also this patch adds and exports function blk_copy_sg(), which copies one SG to
> another.
>
> At the moment SCST is the only user of this functionality. It needs it, because
> its target drivers, which are, basically, SCSI drivers, can deal only with SGs,
> not with BIOs. But, according the latest discussions, there are other potential
> users for of this functionality, so I'm sending this patch in a hope that it will be
> also useful for them and eventually will be merged in the mainline kernel.
>
> This patch requires previously sent patch with subject "[PATCH]: Rename REQ_COPY_USER
> to more descriptive REQ_HAS_TAIL_SPACE_FOR_PADDING".
>
> It's against 2.6.30.1, but if necessary, I can update it to any necessary
> kernel version.
>
> Signed-off-by: Vladislav Bolkhovitin <vst@vlnb.net>
>
> block/blk-map.c | 536 +++++++++++++++++++++++++++++++++++++++++++++
> drivers/scsi/scsi_lib.c | 108 ++++++++-
> include/linux/blkdev.h | 6
> include/scsi/scsi_device.h | 11
> 4 files changed, 660 insertions(+), 1 deletion(-)
>

The scsi bits are not needed and just add complexity.
allocate the request, call blk_rq_map_kern_sg() and
blk_execute_xxx directly from your driver. Since you exacly
know your code path lots of if(s) and flags are saved and that ugly
scsi_io_context allocation.
If you absolutely need that scsi_normalize_sense() of scsi_execute_req
call it from driver, its already exported.

> diff -upkr linux-2.6.30.1/block/blk-map.c linux-2.6.30.1/block/blk-map.c
> --- linux-2.6.30.1/block/blk-map.c 2009-06-10 07:05:27.000000000 +0400
> +++ linux-2.6.30.1/block/blk-map.c 2009-07-09 21:33:07.000000000 +0400
> @@ -5,6 +5,7 @@
> #include <linux/module.h>
> #include <linux/bio.h>
> #include <linux/blkdev.h>
> +#include <linux/scatterlist.h>
> #include <scsi/sg.h> /* for struct sg_iovec */
>
> #include "blk.h"
> @@ -273,6 +274,541 @@ int blk_rq_unmap_user(struct bio *bio)
> EXPORT_SYMBOL(blk_rq_unmap_user);
>
> /**
> + * blk_copy_sg - copy one SG vector to another
> + * @dst_sg: destination SG
> + * @src_sg: source SG
> + * @copy_len: maximum amount of data to copy. If 0, then copy all.
> + * @d_km_type: kmap_atomic type for the destination SG
> + * @s_km_type: kmap_atomic type for the source SG
> + *
> + * Description:
> + * Data from the destination SG vector will be copied to the source SG
> + * vector. End of the vectors will be determined by sg_next() returning
> + * NULL. Returns number of bytes copied.
> + */
> +int blk_copy_sg(struct scatterlist *dst_sg,
> + struct scatterlist *src_sg, size_t copy_len,
> + enum km_type d_km_type, enum km_type s_km_type)
> +{
> + int res = 0;
> + size_t src_len, dst_len, src_offs, dst_offs;
> + struct page *src_page, *dst_page;
> +
> + if (copy_len == 0)
> + copy_len = 0x7FFFFFFF; /* copy all */
> +
> + dst_page = sg_page(dst_sg);
> + dst_len = dst_sg->length;
> + dst_offs = dst_sg->offset;
> +
> + src_offs = 0;
> + do {
> + src_page = sg_page(src_sg);
> + src_len = src_sg->length;
> + src_offs = src_sg->offset;
> +
> + do {
> + void *saddr, *daddr;
> + size_t n;
> +
> + saddr = kmap_atomic(src_page, s_km_type) + src_offs;
> + daddr = kmap_atomic(dst_page, d_km_type) + dst_offs;
> +
> + if ((src_offs == 0) && (dst_offs == 0) &&
> + (src_len >= PAGE_SIZE) && (dst_len >= PAGE_SIZE) &&
> + (copy_len >= PAGE_SIZE)) {
> + copy_page(daddr, saddr);
> + n = PAGE_SIZE;
> + } else {
> + n = min_t(size_t, PAGE_SIZE - dst_offs,
> + PAGE_SIZE - src_offs);
> + n = min(n, src_len);
> + n = min(n, dst_len);
> + n = min_t(size_t, n, copy_len);
> + memcpy(daddr, saddr, n);
> + dst_offs += n;
> + src_offs += n;
> + }
> +
> + kunmap_atomic(saddr, s_km_type);
> + kunmap_atomic(daddr, d_km_type);
> +
> + res += n;
> + copy_len -= n;
> + if (copy_len == 0)
> + goto out;
> +
> + if ((src_offs & ~PAGE_MASK) == 0) {
> + src_page = nth_page(src_page, 1);
> + src_offs = 0;
> + }
> + if ((dst_offs & ~PAGE_MASK) == 0) {
> + dst_page = nth_page(dst_page, 1);
> + dst_offs = 0;
> + }
> +
> + src_len -= n;
> + dst_len -= n;
> + if (dst_len == 0) {
> + dst_sg = sg_next(dst_sg);
> + if (dst_sg == NULL)
> + goto out;
> + dst_page = sg_page(dst_sg);
> + dst_len = dst_sg->length;
> + dst_offs = dst_sg->offset;
> + }
> + } while (src_len > 0);
> +
> + src_sg = sg_next(src_sg);
> + } while (src_sg != NULL);
> +
> +out:
> + return res;
> +}
> +EXPORT_SYMBOL(blk_copy_sg);
> +

This has nothing to do with block layer lib/scatterlist.c is a better
candidate.

see if you can refactor it better together with sg_copy_to/from_buffer

> +/**
> + * blk_rq_unmap_kern_sg - "unmaps" data buffers in the request
> + * @req: request to unmap
> + * @do_copy: sets copy data between buffers, if needed, or not
> + *
> + * Description:
> + * It frees all additional buffers allocated for SG->BIO mapping.
> + */
> +void blk_rq_unmap_kern_sg(struct request *req, int do_copy)
> +{
> + struct scatterlist *hdr = (struct scatterlist *)req->end_io_data;
> +

You can't use req->end_io_data here! req->end_io_data is reserved for
blk_execute_async callers. It can not be used for private block use.

(Don't you use it in this patchset from scsi_execute_async ?)

> + if (hdr == NULL)
> + goto out;
> +
> + if (hdr->length == 0) {
> + /* Tail element only was copied */
> + struct scatterlist *new_sg = &hdr[1];
> + struct scatterlist *orig_sg = (struct scatterlist *)hdr->page_link;
> +

I don't like that overloading of (scatterlist *) like that. Put a well defined struct
or union with proper flags and types, so all possibilities are clear at both sides of
the code. Document that structure for the different options.

> + if ((rq_data_dir(req) == READ) && do_copy) {
> + void *saddr, *daddr;
> +
> + saddr = kmap_atomic(sg_page(orig_sg), KM_BIO_SRC_IRQ);
> + daddr = kmap_atomic(sg_page(new_sg), KM_BIO_DST_IRQ) +
> + new_sg->offset;
> + memcpy(daddr, saddr, orig_sg->length);
> + kunmap_atomic(saddr, KM_BIO_SRC_IRQ);
> + kunmap_atomic(daddr, KM_BIO_DST_IRQ);
> + }
> +
> + __free_pages(sg_page(orig_sg), get_order(orig_sg->length));
> + *orig_sg = *new_sg;
> + kfree(hdr);
> + } else {
> + /* The whole SG was copied */
> + struct scatterlist *new_sgl = &hdr[1];
> + struct scatterlist *orig_sgl = (struct scatterlist *)hdr->page_link;
> + struct scatterlist *sg, *start_sg;

Here too ugly as hell, use a proper structure with the needed types.

> + int n;
> +
> + if ((rq_data_dir(req) == READ) && do_copy) {
> + blk_copy_sg(orig_sgl, new_sgl, 0, KM_BIO_DST_IRQ,
> + KM_BIO_SRC_IRQ);
> + }
> +
> + start_sg = hdr;
> + sg = new_sgl;
> + n = 1;
> + while (sg != NULL) {
> + __free_page(sg_page(sg));
> + sg = sg_next(sg);
> + n++;
> + /* One entry for chaining */
> + if ((sg == NULL) || (n == (SG_MAX_SINGLE_ALLOC - 1))) {
> + kfree(start_sg);
> + start_sg = sg;
> + n = 0;
> + }
> + }
> + }
> +
> +out:
> + return;
> +}
> +EXPORT_SYMBOL(blk_rq_unmap_kern_sg);
> +
> +static int blk_rq_handle_align_tail_only(struct request *rq,
> + struct scatterlist *sg_to_copy,
> + gfp_t gfp, gfp_t page_gfp)
> +{
> + int res = 0;
> + struct scatterlist *tail_sg = sg_to_copy;
> + struct scatterlist *new_sg;
> + struct scatterlist *hdr;
> + int new_sg_nents;
> + struct page *pg;
> +
> + new_sg_nents = 2;
> +
> + new_sg = kmalloc(sizeof(*new_sg) * new_sg_nents, gfp);
> + if (new_sg == NULL)
> + goto out_nomem;
> +
> + sg_init_table(new_sg, new_sg_nents);
> +
> + hdr = new_sg;
> + new_sg++;
> + new_sg_nents--;
> +
> + hdr->page_link = (unsigned long)tail_sg;
> + *new_sg = *tail_sg;
> +
> + pg = alloc_pages(page_gfp, get_order(tail_sg->length));
> + if (pg == NULL)
> + goto err_free_new_sg;
> +
> + if (rq_data_dir(rq) == WRITE) {
> + void *saddr, *daddr;
> + saddr = kmap_atomic(sg_page(tail_sg), KM_USER0) +
> + tail_sg->offset;
> + daddr = kmap_atomic(pg, KM_USER1);
> + memcpy(daddr, saddr, tail_sg->length);
> + kunmap_atomic(saddr, KM_USER0);
> + kunmap_atomic(daddr, KM_USER1);
> + }
> +
> + sg_assign_page(tail_sg, pg);
> + tail_sg->offset = 0;
> +
> + rq->end_io_data = hdr;
> + rq->cmd_flags |= REQ_HAS_TAIL_SPACE_FOR_PADDING;
> +
> +out:
> + return res;
> +
> +err_free_new_sg:
> + kfree(new_sg);
> +
> +out_nomem:
> + res = -ENOMEM;
> + goto out;
> +}
> +
> +static int blk_rq_handle_align(struct request *rq, struct scatterlist **psgl,
> + int *pnents, struct scatterlist *sgl_to_copy,
> + int nents_to_copy, gfp_t gfp, gfp_t page_gfp)
> +{
> + int res = 0, i;
> + struct scatterlist *sgl = *psgl;
> + int nents = *pnents;
> + struct scatterlist *sg, *prev_sg;
> + struct scatterlist *new_sgl;
> + struct scatterlist *hdr;
> + size_t len = 0, to_copy;
> + int new_sgl_nents, new_sgl_nents_to_alloc, n;
> +

below should use the sg_alloc_table / sg_free_table constructs for
the proper chaining/setting of scatterlist chains. Failing to do so
is both a code duplication and hinder of future changes to these constructs.
see all places that use sg_alloc_table/sg_free_table in source like scsi_lib.c.


I'll stop the review here. You need to solve the req->end_io_data use and change
this to sg_alloc_table/sg_free_table (perhaps the one with the callback i'm not sure)

I'll continue review on the next patchset.

Cheers
Boaz

> + if (sgl != sgl_to_copy) {
> + /* Copy only the last element */
> + res = blk_rq_handle_align_tail_only(rq, sgl_to_copy,
> + gfp, page_gfp);
> + if (res == 0)
> + goto out;
> + }
> +
> + for_each_sg(sgl, sg, nents, i)
> + len += sg->length;
> + to_copy = len;
> +
> + /*
> + * Let's keep each SG allocation inside a single page to decrease
> + * probability of failure.
> + */
> +
> + new_sgl_nents = PFN_UP(len) + 1;
> + new_sgl_nents_to_alloc = new_sgl_nents +
> + ((new_sgl_nents - 1) / SG_MAX_SINGLE_ALLOC);
> + n = min_t(size_t, SG_MAX_SINGLE_ALLOC, new_sgl_nents_to_alloc);
> +
> + new_sgl = kmalloc(sizeof(*new_sgl) * n, gfp);
> + if (new_sgl == NULL)
> + goto out_nomem;
> +
> + sg_init_table(new_sgl, n);
> +
> + new_sgl_nents_to_alloc -= n;
> + sg = new_sgl;
> + while (new_sgl_nents_to_alloc > 0) {
> + prev_sg = sg;
> + n = min_t(size_t, SG_MAX_SINGLE_ALLOC, new_sgl_nents_to_alloc);
> +
> + sg = kmalloc(sizeof(*sg) * n, gfp);
> + if (sg == NULL)
> + goto out_nomem;
> +
> + sg_init_table(sg, n);
> + sg_chain(prev_sg, SG_MAX_SINGLE_ALLOC, sg);
> +
> + new_sgl_nents_to_alloc -= n;
> + };
> +
> + hdr = new_sgl;
> + new_sgl++;
> + new_sgl_nents--;
> +
> + hdr->page_link = (unsigned long)sgl;
> + hdr->length = nents;
> +
> + for_each_sg(new_sgl, sg, new_sgl_nents, i) {
> + struct page *pg;
> +
> + pg = alloc_page(page_gfp);
> + if (pg == NULL)
> + goto err_free_new_sgl;
> +
> + sg_assign_page(sg, pg);
> + sg->length = min_t(size_t, PAGE_SIZE, len);
> +
> + len -= PAGE_SIZE;
> + }
> +
> + if (rq_data_dir(rq) == WRITE) {
> + /*
> + * We need to limit amount of copied data to to_copy, because
> + * sgl might have the last element not marked as last in
> + * SG chaining.
> + */
> + blk_copy_sg(new_sgl, sgl, to_copy, KM_USER0, KM_USER1);
> + }
> +
> + rq->end_io_data = hdr;
> + rq->cmd_flags |= REQ_HAS_TAIL_SPACE_FOR_PADDING;
> +
> + *psgl = new_sgl;
> + *pnents = new_sgl_nents;
> +
> +out:
> + return res;
> +
> +err_free_new_sgl:
> + for_each_sg(new_sgl, sg, new_sgl_nents, i) {
> + struct page *pg = sg_page(sg);
> + if (pg == NULL)
> + break;
> + __free_page(pg);
> + }
> +
> +out_nomem:
> + res = -ENOMEM;
> + goto out;
> +}
> +
> +static void bio_map_kern_endio(struct bio *bio, int err)
> +{
> + bio_put(bio);
> +}
> +
> +static int __blk_rq_map_kern_sg(struct request *rq, struct scatterlist *sgl,
> + int nents, gfp_t gfp, struct scatterlist **sgl_to_copy,
> + int *nents_to_copy)
> +{
> + int res;
> + struct request_queue *q = rq->q;
> + int rw = rq_data_dir(rq);
> + int max_nr_vecs, i;
> + size_t tot_len;
> + bool need_new_bio;
> + struct scatterlist *sg, *prev_sg = NULL;
> + struct bio *bio = NULL, *hbio = NULL, *tbio = NULL;
> +
> + *sgl_to_copy = NULL;
> +
> + if (unlikely((sgl == 0) || (nents <= 0))) {
> + WARN_ON(1);
> + res = -EINVAL;
> + goto out;
> + }
> +
> + /*
> + * Let's keep each bio allocation inside a single page to decrease
> + * probability of failure.
> + */
> + max_nr_vecs = min_t(size_t,
> + ((PAGE_SIZE - sizeof(struct bio)) / sizeof(struct bio_vec)),
> + BIO_MAX_PAGES);
> +
> + need_new_bio = true;
> + tot_len = 0;
> + for_each_sg(sgl, sg, nents, i) {
> + struct page *page = sg_page(sg);
> + void *page_addr = page_address(page);
> + size_t len = sg->length, l;
> + size_t offset = sg->offset;
> +
> + tot_len += len;
> + prev_sg = sg;
> +
> + /*
> + * Each segment must be aligned on DMA boundary and
> + * not on stack. The last one may have unaligned
> + * length as long as the total length is aligned to
> + * DMA padding alignment.
> + */
> + if (i == nents - 1)
> + l = 0;
> + else
> + l = len;
> + if (((sg->offset | l) & queue_dma_alignment(q)) ||
> + (page_addr && object_is_on_stack(page_addr + sg->offset))) {
> + res = -EINVAL;
> + goto out_need_copy;
> + }
> +
> + while (len > 0) {
> + size_t bytes;
> + int rc;
> +
> + if (need_new_bio) {
> + bio = bio_kmalloc(gfp, max_nr_vecs);
> + if (bio == NULL) {
> + res = -ENOMEM;
> + goto out_free_bios;
> + }
> +
> + if (rw == WRITE)
> + bio->bi_rw |= 1 << BIO_RW;
> +
> + bio->bi_end_io = bio_map_kern_endio;
> +
> + if (hbio == NULL)
> + hbio = tbio = bio;
> + else
> + tbio = tbio->bi_next = bio;
> + }
> +
> + bytes = min_t(size_t, len, PAGE_SIZE - offset);
> +
> + rc = bio_add_pc_page(q, bio, page, bytes, offset);
> + if (rc < bytes) {
> + if (unlikely(need_new_bio || (rc < 0))) {
> + if (rc < 0)
> + res = rc;
> + else
> + res = -EIO;
> + goto out_need_copy;
> + } else {
> + need_new_bio = true;
> + len -= rc;
> + offset += rc;
> + continue;
> + }
> + }
> +
> + need_new_bio = false;
> + offset = 0;
> + len -= bytes;
> + page = nth_page(page, 1);
> + }
> + }
> +
> + if (hbio == NULL) {
> + res = -EINVAL;
> + goto out_free_bios;
> + }
> +
> + /* Total length must be aligned on DMA padding alignment */
> + if ((tot_len & q->dma_pad_mask) &&
> + !(rq->cmd_flags & REQ_HAS_TAIL_SPACE_FOR_PADDING)) {
> + res = -EINVAL;
> + if (sgl->offset == 0) {
> + *sgl_to_copy = prev_sg;
> + *nents_to_copy = 1;
> + goto out_free_bios;
> + } else
> + goto out_need_copy;
> + }
> +
> + while (hbio != NULL) {
> + bio = hbio;
> + hbio = hbio->bi_next;
> + bio->bi_next = NULL;
> +
> + blk_queue_bounce(q, &bio);
> +
> + res = blk_rq_append_bio(q, rq, bio);
> + if (unlikely(res != 0)) {
> + bio->bi_next = hbio;
> + hbio = bio;
> + goto out_free_bios;
> + }
> + }
> +
> + rq->buffer = rq->data = NULL;
> +
> +out:
> + return res;
> +
> +out_need_copy:
> + *sgl_to_copy = sgl;
> + *nents_to_copy = nents;
> +
> +out_free_bios:
> + while (hbio != NULL) {
> + bio = hbio;
> + hbio = hbio->bi_next;
> + bio_put(bio);
> + }
> + goto out;
> +}
> +
> +/**
> + * blk_rq_map_kern_sg - map kernel data to a request, for REQ_TYPE_BLOCK_PC
> + * @rq: request to fill
> + * @sgl: area to map
> + * @nents: number of elements in @sgl
> + * @gfp: memory allocation flags
> + *
> + * Description:
> + * Data will be mapped directly if possible. Otherwise a bounce
> + * buffer will be used.
> + */
> +int blk_rq_map_kern_sg(struct request *rq, struct scatterlist *sgl,
> + int nents, gfp_t gfp)
> +{
> + int res;
> + struct scatterlist *sg_to_copy = NULL;
> + int nents_to_copy = 0;
> +
> + if (unlikely((sgl == 0) || (sgl->length == 0) ||
> + (nents <= 0) || (rq->end_io_data != NULL))) {
> + WARN_ON(1);
> + res = -EINVAL;
> + goto out;
> + }
> +
> + res = __blk_rq_map_kern_sg(rq, sgl, nents, gfp, &sg_to_copy,
> + &nents_to_copy);
> + if (unlikely(res != 0)) {
> + if (sg_to_copy == NULL)
> + goto out;
> +
> + res = blk_rq_handle_align(rq, &sgl, &nents, sg_to_copy,
> + nents_to_copy, gfp, rq->q->bounce_gfp | gfp);
> + if (unlikely(res != 0))
> + goto out;
> +
> + res = __blk_rq_map_kern_sg(rq, sgl, nents, gfp, &sg_to_copy,
> + &nents_to_copy);
> + if (res != 0) {
> + blk_rq_unmap_kern_sg(rq, 0);
> + goto out;
> + }
> + }
> +
> + rq->buffer = rq->data = NULL;
> +
> +out:
> + return res;
> +}
> +EXPORT_SYMBOL(blk_rq_map_kern_sg);
> +
> +/**
> * blk_rq_map_kern - map kernel data to a request, for REQ_TYPE_BLOCK_PC usage
> * @q: request queue where request should be inserted
> * @rq: request to fill
> diff -upkr linux-2.6.30.1/drivers/scsi/scsi_lib.c linux-2.6.30.1/drivers/scsi/scsi_lib.c
> --- linux-2.6.30.1/drivers/scsi/scsi_lib.c 2009-06-10 07:05:27.000000000 +0400
> +++ linux-2.6.30.1/drivers/scsi/scsi_lib.c 2009-07-08 21:24:29.000000000 +0400
> @@ -277,6 +277,100 @@ int scsi_execute_req(struct scsi_device
> }
> EXPORT_SYMBOL(scsi_execute_req);
>
> +struct scsi_io_context {
> + void *blk_data;
> + void *data;
> + void (*done)(void *data, char *sense, int result, int resid);
> + char sense[SCSI_SENSE_BUFFERSIZE];
> +};
> +
> +static struct kmem_cache *scsi_io_context_cache;
> +
> +static void scsi_end_async(struct request *req, int error)
> +{
> + struct scsi_io_context *sioc = req->end_io_data;
> +
> + req->end_io_data = sioc->blk_data;
> + blk_rq_unmap_kern_sg(req, (error == 0));
> +
> + if (sioc->done)
> + sioc->done(sioc->data, sioc->sense, req->errors, req->data_len);
> +
> + kmem_cache_free(scsi_io_context_cache, sioc);
> + __blk_put_request(req->q, req);
> +}
> +
> +/**
> + * scsi_execute_async - insert request
> + * @sdev: scsi device
> + * @cmd: scsi command
> + * @cmd_len: length of scsi cdb
> + * @data_direction: DMA_TO_DEVICE, DMA_FROM_DEVICE, or DMA_NONE
> + * @sgl: data buffer scatterlist
> + * @nents: number of elements in the sgl
> + * @timeout: request timeout in seconds
> + * @retries: number of times to retry request
> + * @privdata: data passed to done()
> + * @done: callback function when done
> + * @gfp: memory allocation flags
> + * @flags: one or more SCSI_ASYNC_EXEC_FLAG_* flags
> + */
> +int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd,
> + int cmd_len, int data_direction, struct scatterlist *sgl,
> + int nents, int timeout, int retries, void *privdata,
> + void (*done)(void *, char *, int, int), gfp_t gfp,
> + int flags)
> +{
> + struct request *req;
> + struct scsi_io_context *sioc;
> + int err = 0;
> + int write = (data_direction == DMA_TO_DEVICE);
> +
> + sioc = kmem_cache_zalloc(scsi_io_context_cache, gfp);
> + if (sioc == NULL)
> + return DRIVER_ERROR << 24;
> +
> + req = blk_get_request(sdev->request_queue, write, gfp);
> + if (req == NULL)
> + goto free_sense;
> + req->cmd_type = REQ_TYPE_BLOCK_PC;
> + req->cmd_flags |= REQ_QUIET;
> +
> + if (flags & SCSI_ASYNC_EXEC_FLAG_HAS_TAIL_SPACE_FOR_PADDING)
> + req->cmd_flags |= REQ_HAS_TAIL_SPACE_FOR_PADDING;
> +
> + if (sgl != NULL) {
> + err = blk_rq_map_kern_sg(req, sgl, nents, gfp);
> + if (err)
> + goto free_req;
> + }
> +
> + sioc->blk_data = req->end_io_data;
> + sioc->data = privdata;
> + sioc->done = done;
> +
> + req->cmd_len = cmd_len;
> + memset(req->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */
> + memcpy(req->cmd, cmd, req->cmd_len);
> + req->sense = sioc->sense;
> + req->sense_len = 0;
> + req->timeout = timeout;
> + req->retries = retries;
> + req->end_io_data = sioc;
> +
> + blk_execute_rq_nowait(req->q, NULL, req,
> + flags & SCSI_ASYNC_EXEC_FLAG_AT_HEAD, scsi_end_async);
> + return 0;
> +
> +free_req:
> + blk_put_request(req);
> +
> +free_sense:
> + kmem_cache_free(scsi_io_context_cache, sioc);
> + return DRIVER_ERROR << 24;
> +}
> +EXPORT_SYMBOL_GPL(scsi_execute_async);
> +
> /*
> * Function: scsi_init_cmd_errh()
> *
> @@ -1743,12 +1837,20 @@ int __init scsi_init_queue(void)
> {
> int i;
>
> + scsi_io_context_cache = kmem_cache_create("scsi_io_context",
> + sizeof(struct scsi_io_context),
> + 0, 0, NULL);
> + if (!scsi_io_context_cache) {
> + printk(KERN_ERR "SCSI: can't init scsi io context cache\n");
> + return -ENOMEM;
> + }
> +
> scsi_sdb_cache = kmem_cache_create("scsi_data_buffer",
> sizeof(struct scsi_data_buffer),
> 0, 0, NULL);
> if (!scsi_sdb_cache) {
> printk(KERN_ERR "SCSI: can't init scsi sdb cache\n");
> - return -ENOMEM;
> + goto cleanup_io_context;
> }
>
> for (i = 0; i < SG_MEMPOOL_NR; i++) {
> @@ -1784,6 +1886,9 @@ cleanup_sdb:
> }
> kmem_cache_destroy(scsi_sdb_cache);
>
> +cleanup_io_context:
> + kmem_cache_destroy(scsi_io_context_cache);
> +
> return -ENOMEM;
> }
>
> @@ -1791,6 +1896,7 @@ void scsi_exit_queue(void)
> {
> int i;
>
> + kmem_cache_destroy(scsi_io_context_cache);
> kmem_cache_destroy(scsi_sdb_cache);
>
> for (i = 0; i < SG_MEMPOOL_NR; i++) {
> diff -upkr linux-2.6.30.1/include/linux/blkdev.h linux-2.6.30.1/include/linux/blkdev.h
> --- linux-2.6.30.1/include/linux/blkdev.h 2009-06-10 07:05:27.000000000 +0400
> +++ linux-2.6.30.1/include/linux/blkdev.h 2009-07-08 21:24:29.000000000 +0400
> @@ -807,6 +807,9 @@ extern int blk_rq_map_kern(struct reques
> extern int blk_rq_map_user_iov(struct request_queue *, struct request *,
> struct rq_map_data *, struct sg_iovec *, int,
> unsigned int, gfp_t);
> +extern int blk_rq_map_kern_sg(struct request *rq,
> + struct scatterlist *sgl, int nents, gfp_t gfp);
> +extern void blk_rq_unmap_kern_sg(struct request *req, int do_copy);
> extern int blk_execute_rq(struct request_queue *, struct gendisk *,
> struct request *, int);
> extern void blk_execute_rq_nowait(struct request_queue *, struct gendisk *,
> @@ -909,6 +912,9 @@ extern void blk_dump_rq_flags(struct req
> extern void generic_unplug_device(struct request_queue *);
> extern long nr_blockdev_pages(void);
>
> +extern int blk_copy_sg(struct scatterlist *, struct scatterlist *, size_t,
> + enum km_type, enum km_type);
> +
> int blk_get_queue(struct request_queue *);
> struct request_queue *blk_alloc_queue(gfp_t);
> struct request_queue *blk_alloc_queue_node(gfp_t, int);
> diff -upkr linux-2.6.30.1/include/scsi/scsi_device.h linux-2.6.30.1/include/scsi/scsi_device.h
> --- linux-2.6.30.1/include/scsi/scsi_device.h 2009-06-10 07:05:27.000000000 +0400
> +++ linux-2.6.30.1/include/scsi/scsi_device.h 2009-07-08 21:24:29.000000000 +0400
> @@ -372,6 +372,17 @@ extern int scsi_execute_req(struct scsi_
> struct scsi_sense_hdr *, int timeout, int retries,
> int *resid);
>
> +#define SCSI_ASYNC_EXEC_FLAG_AT_HEAD 1
> +#define SCSI_ASYNC_EXEC_FLAG_HAS_TAIL_SPACE_FOR_PADDING 2
> +
> +#define SCSI_EXEC_REQ_FIFO_DEFINED
> +extern int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd,
> + int cmd_len, int data_direction,
> + struct scatterlist *sgl, int nents, int timeout,
> + int retries, void *privdata,
> + void (*done)(void *, char *, int, int),
> + gfp_t gfp, int flags);
> +
> static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
> {
> return device_reprobe(&sdev->sdev_gendev);
>
>



\
 
 \ /
  Last update: 2009-07-12 15:07    [from the cache]
©2003-2011 Jasper Spaans