lkml.org 
[lkml]   [2009]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] enable x2APIC without interrupt remapping under KVM
On 06/30/2009 10:36 PM, Eric W. Biederman wrote:
>>> The short version is I don't know what work arounds we will ultimately
>>> decide to deploy to work with real hardware.
>>>
>>> I have been seriously contemplating causing a cpu hot-unplug request
>>> to fail if we are in ioapic mode and we have irqs routed to the cpu
>>> that is being unplugged.
>>>
>>>
>> Well, obviously we need to disassociate any irqs from such a cpu. Could be done
>> from the kernel or only enforced by the kernel.
>>
>
> Using the normal irq migration path we can move irqs off of a cpu reliably
> there just aren't any progress guarantees.
>

Program the ioapic to the new cpu. Wait a few milliseconds. If it
takes more than that to get an interrupt from the ioapic to the local
apic, the machine has much bigger problems.

>>> Even with perfectly working hardware it is not possible in the general
>>> case to migrate an ioapic irq from one cpu to another outside of an
>>> interrupt handler without without risking dropping an interrupt.
>>>
>>>
>> Can't you generate a spurious interrupt immediately after the migration? An
>> extra interrupt shouldn't hurt.
>>
>
> Nope. The ioapics can't be told to send an interrupt.
>

You can program the local apic ICR to generate an interrupt with the
same vector.

>>> There is no general way to know you have seen the last interrupt
>>> floating around your system. PCI ordering rules don't help because
>>> the ioapics can potentially take an out of band channel.
>>>
>>>
>> Can you describe the problem scenario? an ioapic->lapic message delivered to a
>> dead cpu?
>>
>
> Dropped irqs.. Driver hangs because it is waiting for an irq. Hardware
> hangs because it is waiting for the cpu to process the irq.
>
> Potentially we get a level triggered irq that is never acked by
> the cpu that won't arm until the cpu send an ack, and we can't
> send an ack from another cpu.
>
>

I think a spurious interrupt generated through the local apic solves
that problem. For level-triggered interrupts, mask them before
offlining the cpu.

--
error compiling committee.c: too many arguments to function



\
 
 \ /
  Last update: 2009-07-01 10:31    [W:0.084 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site