lkml.org 
[lkml]   [2009]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 07/10] ACPI: eviscerate pci_bind.c
Date
On Tuesday 02 June 2009 09:25:11 am Alex Chiang wrote:
> Now that we can dynamically convert an ACPI CA handle to a
> struct pci_dev at runtime, there's no need to statically bind
> them during boot.
>
> acpi_pci_bind/unbind are vastly simplified, and are only used
> to evaluate _PRT methods on P2P bridges and non-bridge children.
>
> This patchset lays further groundwork to eventually eliminate
> the acpi_driver_ops.bind callback.
>
> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
> Signed-off-by: Alex Chiang <achiang@hp.com>
> ---
>
> drivers/acpi/pci_bind.c | 268 ++++++-------------------------------------
> drivers/acpi/pci_root.c | 2
> include/acpi/acpi_drivers.h | 3
> 3 files changed, 41 insertions(+), 232 deletions(-)
>
> diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c
> index 10e3ffc..0469cf2 100644
> --- a/drivers/acpi/pci_bind.c
> +++ b/drivers/acpi/pci_bind.c
> @@ -3,6 +3,8 @@
> *
> * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
> * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
> + * Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
> + * Alex Chiang <achiang@hp.com>
> *
> * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> *
> @@ -24,12 +26,7 @@
> */
>
> #include <linux/kernel.h>
> -#include <linux/module.h>
> -#include <linux/init.h>
> #include <linux/types.h>
> -#include <linux/proc_fs.h>
> -#include <linux/spinlock.h>
> -#include <linux/pm.h>
> #include <linux/pci.h>
> #include <linux/acpi.h>
> #include <acpi/acpi_bus.h>
> @@ -38,24 +35,6 @@
> #define _COMPONENT ACPI_PCI_COMPONENT
> ACPI_MODULE_NAME("pci_bind");
>
> -struct acpi_pci_data {
> - struct acpi_pci_id id;
> - struct pci_bus *bus;
> - struct pci_dev *dev;
> -};
> -
> -static int acpi_pci_bind(struct acpi_device *device);
> -static int acpi_pci_unbind(struct acpi_device *device);
> -
> -static void acpi_pci_data_handler(acpi_handle handle, u32 function,
> - void *context)
> -{
> -
> - /* TBD: Anything we need to do here? */
> -
> - return;
> -}
> -
> struct acpi_handle_node {
> struct list_head node;
> acpi_handle handle;
> @@ -139,241 +118,72 @@ out:
> }
> EXPORT_SYMBOL_GPL(acpi_get_pci_dev);
>
> -
> -static int acpi_pci_bind(struct acpi_device *device)
> +static int acpi_pci_unbind(struct acpi_device *device)
> {
> - int result = 0;
> - acpi_status status;
> - struct acpi_pci_data *data;
> - struct acpi_pci_data *pdata;
> - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
> - acpi_handle handle;
> -
> - if (!device || !device->parent)
> - return -EINVAL;
> -
> - data = kzalloc(sizeof(struct acpi_pci_data), GFP_KERNEL);
> - if (!data)
> - return -ENOMEM;
> -
> - status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer);
> - if (ACPI_FAILURE(status)) {
> - kfree(data);
> - return -ENODEV;
> - }
> -
> - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Binding PCI device [%s]...\n",
> - (char *)buffer.pointer));
> + struct pci_dev *dev;
>
> - /*
> - * Segment & Bus
> - * -------------
> - * These are obtained via the parent device's ACPI-PCI context.
> - */
> - status = acpi_get_data(device->parent->handle, acpi_pci_data_handler,
> - (void **)&pdata);
> - if (ACPI_FAILURE(status) || !pdata || !pdata->bus) {
> - ACPI_EXCEPTION((AE_INFO, status,
> - "Invalid ACPI-PCI context for parent device %s",
> - acpi_device_bid(device->parent)));
> - result = -ENODEV;
> - goto end;
> - }
> - data->id.segment = pdata->id.segment;
> - data->id.bus = pdata->bus->number;
> + dev = acpi_get_pci_dev(device->handle);
> + if (!dev)
> + return 0;

I think you need some pci_put_dev() calls to correspond with the new
acpi_get_pci_dev() calls.

> - /*
> - * Device & Function
> - * -----------------
> - * These are simply obtained from the device's _ADR method. Note
> - * that a value of zero is valid.
> - */
> - data->id.device = device->pnp.bus_address >> 16;
> - data->id.function = device->pnp.bus_address & 0xFFFF;
> + if (dev->subordinate)
> + acpi_pci_irq_del_prt(pci_domain_nr(dev->bus),
> + dev->subordinate->number);
>
> - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "...to %04x:%02x:%02x.%d\n",
> - data->id.segment, data->id.bus, data->id.device,
> - data->id.function));
> + return 0;
> +}
>
> - /*
> - * TBD: Support slot devices (e.g. function=0xFFFF).
> - */
> +static int acpi_pci_bind(struct acpi_device *device)
> +{
> + acpi_status status;
> + acpi_handle handle;
> + unsigned char bus;
> + struct pci_dev *dev;
>
> - /*
> - * Locate PCI Device
> - * -----------------
> - * Locate matching device in PCI namespace. If it doesn't exist
> - * this typically means that the device isn't currently inserted
> - * (e.g. docking station, port replicator, etc.).
> - */
> - data->dev = pci_get_slot(pdata->bus,
> - PCI_DEVFN(data->id.device, data->id.function));
> - if (!data->dev) {
> - ACPI_DEBUG_PRINT((ACPI_DB_INFO,
> - "Device %04x:%02x:%02x.%d not present in PCI namespace\n",
> - data->id.segment, data->id.bus,
> - data->id.device, data->id.function));
> - result = -ENODEV;
> - goto end;
> - }
> - if (!data->dev->bus) {
> - printk(KERN_ERR PREFIX
> - "Device %04x:%02x:%02x.%d has invalid 'bus' field\n",
> - data->id.segment, data->id.bus,
> - data->id.device, data->id.function);
> - result = -ENODEV;
> - goto end;
> - }
> + dev = acpi_get_pci_dev(device->handle);
> + if (!dev)
> + return 0;
>
> /*
> - * PCI Bridge?
> - * -----------
> - * If so, set the 'bus' field and install the 'bind' function to
> - * facilitate callbacks for all of its children.
> + * Install the 'bind' function to facilitate callbacks for
> + * children of the P2P bridge.
> */
> - if (data->dev->subordinate) {
> + if (dev->subordinate) {
> ACPI_DEBUG_PRINT((ACPI_DB_INFO,
> "Device %04x:%02x:%02x.%d is a PCI bridge\n",
> - data->id.segment, data->id.bus,
> - data->id.device, data->id.function));
> - data->bus = data->dev->subordinate;
> + pci_domain_nr(dev->bus), dev->bus->number,
> + PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)));
> device->ops.bind = acpi_pci_bind;
> device->ops.unbind = acpi_pci_unbind;
> }
>
> /*
> - * Attach ACPI-PCI Context
> - * -----------------------
> - * Thus binding the ACPI and PCI devices.
> - */
> - status = acpi_attach_data(device->handle, acpi_pci_data_handler, data);
> - if (ACPI_FAILURE(status)) {
> - ACPI_EXCEPTION((AE_INFO, status,
> - "Unable to attach ACPI-PCI context to device %s",
> - acpi_device_bid(device)));
> - result = -ENODEV;
> - goto end;
> - }
> -
> - /*
> - * PCI Routing Table
> - * -----------------
> - * Evaluate and parse _PRT, if exists. This code is independent of
> - * PCI bridges (above) to allow parsing of _PRT objects within the
> - * scope of non-bridge devices. Note that _PRTs within the scope of
> - * a PCI bridge assume the bridge's subordinate bus number.
> + * Evaluate and parse _PRT, if exists. This code allows parsing of
> + * _PRT objects within the scope of non-bridge devices. Note that
> + * _PRTs within the scope of a PCI bridge assume the bridge's
> + * subordinate bus number.
> *
> * TBD: Can _PRTs exist within the scope of non-bridge PCI devices?
> */
> status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
> - if (ACPI_SUCCESS(status)) {
> - if (data->bus) /* PCI-PCI bridge */
> - acpi_pci_irq_add_prt(device->handle, data->id.segment,
> - data->bus->number);
> - else /* non-bridge PCI device */
> - acpi_pci_irq_add_prt(device->handle, data->id.segment,
> - data->id.bus);
> - }
> -
> - end:
> - kfree(buffer.pointer);
> - if (result) {
> - pci_dev_put(data->dev);
> - kfree(data);
> - }
> - return result;
> -}
> -
> -static int acpi_pci_unbind(struct acpi_device *device)
> -{
> - int result = 0;
> - acpi_status status;
> - struct acpi_pci_data *data;
> - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
> -
> -
> - if (!device || !device->parent)
> - return -EINVAL;
> -
> - status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer);
> if (ACPI_FAILURE(status))
> - return -ENODEV;
> -
> - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unbinding PCI device [%s]...\n",
> - (char *) buffer.pointer));
> - kfree(buffer.pointer);
> + return 0;
>
> - status =
> - acpi_get_data(device->handle, acpi_pci_data_handler,
> - (void **)&data);
> - if (ACPI_FAILURE(status)) {
> - result = -ENODEV;
> - goto end;
> - }
> + if (dev->subordinate)
> + bus = dev->subordinate->number;
> + else
> + bus = dev->bus->number;
>
> - status = acpi_detach_data(device->handle, acpi_pci_data_handler);
> - if (ACPI_FAILURE(status)) {
> - ACPI_EXCEPTION((AE_INFO, status,
> - "Unable to detach data from device %s",
> - acpi_device_bid(device)));
> - result = -ENODEV;
> - goto end;
> - }
> - if (data->dev->subordinate) {
> - acpi_pci_irq_del_prt(data->id.segment, data->bus->number);
> - }
> - pci_dev_put(data->dev);
> - kfree(data);
> + acpi_pci_irq_add_prt(device->handle, pci_domain_nr(dev->bus), bus);
>
> - end:
> - return result;
> + return 0;
> }
>
> int
> -acpi_pci_bind_root(struct acpi_device *device,
> - struct acpi_pci_id *id, struct pci_bus *bus)
> +acpi_pci_bind_root(struct acpi_device *device)

Since you're slicing and dicing anyway, can you make the proto
indentation here match the rest of the file ("int acpi_pci...")?

> {
> - int result = 0;
> - acpi_status status;
> - struct acpi_pci_data *data = NULL;
> - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
> -
> - if (!device || !id || !bus) {
> - return -EINVAL;
> - }
> -
> - data = kzalloc(sizeof(struct acpi_pci_data), GFP_KERNEL);
> - if (!data)
> - return -ENOMEM;
> -
> - data->id = *id;
> - data->bus = bus;
> device->ops.bind = acpi_pci_bind;
> device->ops.unbind = acpi_pci_unbind;
>
> - status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer);
> - if (ACPI_FAILURE(status)) {
> - kfree (data);
> - return -ENODEV;
> - }
> -
> - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Binding PCI root bridge [%s] to "
> - "%04x:%02x\n", (char *)buffer.pointer,
> - id->segment, id->bus));
> -
> - status = acpi_attach_data(device->handle, acpi_pci_data_handler, data);
> - if (ACPI_FAILURE(status)) {
> - ACPI_EXCEPTION((AE_INFO, status,
> - "Unable to attach ACPI-PCI context to device %s",
> - (char *)buffer.pointer));
> - result = -ENODEV;
> - goto end;
> - }
> -
> - end:
> - kfree(buffer.pointer);
> - if (result != 0)
> - kfree(data);
> -
> - return result;
> + return 0;
> }
> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
> index bcab69a..25ddbb6 100644
> --- a/drivers/acpi/pci_root.c
> +++ b/drivers/acpi/pci_root.c
> @@ -526,7 +526,7 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
> * -----------------------
> * Thus binding the ACPI and PCI devices.
> */
> - result = acpi_pci_bind_root(device, &root->id, root->bus);
> + result = acpi_pci_bind_root(device);
> if (result)
> goto end;
>
> diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
> index 310f5ff..1c50f4f 100644
> --- a/include/acpi/acpi_drivers.h
> +++ b/include/acpi/acpi_drivers.h
> @@ -98,8 +98,7 @@ void acpi_pci_irq_del_prt(int segment, int bus);
> struct pci_bus;
>
> struct pci_dev *acpi_get_pci_dev(acpi_handle);
> -int acpi_pci_bind_root(struct acpi_device *device, struct acpi_pci_id *id,
> - struct pci_bus *bus);
> +int acpi_pci_bind_root(struct acpi_device *device);
>
> /* Arch-defined function to add a bus to the system */
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>




\
 
 \ /
  Last update: 2009-06-03 20:29    [W:0.120 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site