Messages in this thread |  | | | Date | Sat, 27 Jun 2009 23:40:38 -0400 | | From | Stephen Frost <> | | Subject | ACPI issues on HP DL585 G2 |
Greetings,
When running pretty much anything newer than 2.6.22, both the cciss module and the bnx2 module get stuck in a "Loading" state in /proc/modules. As cciss contains my root partition, I get dropped into an initrd after a while because root can't be found. After some googleing, etc, I saw a bunch of recommendations to add "pci=noapic noapic" to the command-line. After I did that, the box booted fine under 2.6.29. I figured people might like to hear about this issue though. Attached are a dmesg from 2.6.22 and a dmesg from 2.6.29 (w/ the noapic options). I've also included the output of hpasmcli -s "show server". If there's anything else that would be useful to help figure this out, please let me know.
Thanks,
Stephen Linux version 2.6.22-3-amd64 (Debian 2.6.22-6) (maks@debian.org) (gcc version 4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 SMP Sun Nov 4 18:18:09 UTC 2007 Command line: root=/dev/cciss/c0d0p1 ro BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe50000 (usable) BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data) BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000047ffff000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 523856) 1 entries of 3200 used Entering add_active_range(0, 1048576, 4718591) 2 entries of 3200 used end_pfn_map = 4718591 DMI 2.3 present. ACPI: RSDP 000F4F00, 0024 (r2 HP ) ACPI: XSDT 7FE50780, 005C (r1 HP A07 2 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.29-2-amd64 (Debian 2.6.29-4) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-8) ) #1 SMP Sun May 3 11:38:27 UTC 2009 [ 0.000000] Command line: root=/dev/cciss/c0d0p1 ro pci=noapic noapic [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe4e000 (usable) [ 0.000000] BIOS-e820: 000000007fe4e000 - 000000007fe56000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fe56000 - 000000007fe57000 (usable) [ 0.000000] BIOS-e820: 000000007fe57000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000047ffff000 (usable) [ 0.000000] PCI: Unknown option `noapic' [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x47ffff max_arch_pfn = 0x100000000 [ 0.000000] last_pfn = 0x7fe57 max_arch_pfn = 0x100000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007fe57000 [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007fe57000 page 4k [ 0.000000] kernel direct mapping tables up to 7fe57000 @ 8000-c000 [ 0.000000] last_map_addr: 7fe57000 end: 7fe57000 [ 0.000000] init_memory_mapping: 0000000100000000-000000047ffff000 [ 0.000000] 0100000000 - 047fe00000 page 2M [ 0.000000] 047fe00000 - 047ffff000 page 4k [ 0.000000] kernel direct mapping tables up to 47ffff000 @ a000-1e000 [ 0.000000] last_map_addr: 47ffff000 end: 47ffff000 [ 0.000000] RAMDISK: 37783000 - 37fef87c [ 0.000000] ACPI: RSDP 000F4F00, 0024 (r2 HP ) [ 0.000000] ACPI: XSDT 7FE4ED00, 0074 (r1 HP ProLiant 2 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a4) 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev b1) 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a4) 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a3) 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:1a.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:1a.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:1a.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:1a.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:1b.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:1b.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:1b.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:1b.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:03.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) 01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 03) 01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 03) 01:04.4 USB Controller: Hewlett-Packard Company Proliant iLO2 virtual USB controller 01:04.6 IPMI SMIC interface: Hewlett-Packard Company Proliant iLO2 virtual UART 40:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a4) 40:01.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev b1) 40:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 40:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 40:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 40:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 40:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8132 PCI-X Bridge (rev 12) 40:10.1 PIC: Advanced Micro Devices [AMD] AMD-8132 PCI-X IOAPIC (rev 12) 40:11.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8132 PCI-X Bridge (rev 12) 40:11.1 PIC: Advanced Micro Devices [AMD] AMD-8132 PCI-X IOAPIC (rev 12) 41:01.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5706 Gigabit Ethernet (rev 02) 41:02.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5706 Gigabit Ethernet (rev 02) 42:02.0 RAID bus controller: Hewlett-Packard Company Smart Array P600 CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 0: 45 1 0 0 1 0 0 0 XT-PIC-XT timer 1: 2 0 0 0 0 0 0 0 XT-PIC-XT i8042 2: 0 0 0 0 0 0 0 0 XT-PIC-XT cascade 3: 4 0 1 0 2 0 1 0 XT-PIC-XT serial 4: 4 0 0 0 2 0 0 0 XT-PIC-XT 5: 20 1 5 0 10 0 1 0 XT-PIC-XT ohci_hcd:usb3 7: 10336 96993 100292 100678 98680 100812 100704 101045 XT-PIC-XT 8: 1 0 0 0 0 0 0 0 XT-PIC-XT rtc0 9: 0 0 0 0 0 0 0 0 XT-PIC-XT acpi 10: 59622 2604 485 547 1719 324 278 251 XT-PIC-XT uhci_hcd:usb2, ipmi_si, eth0, eth1 11: 23514 1731 541 100 978 200 395 24 XT-PIC-XT ehci_hcd:usb1, cciss0 12: 3 1 0 0 0 0 0 0 XT-PIC-XT i8042 14: 7924 65 58 2 29 10 20 1 XT-PIC-XT ide0 NMI: 0 0 0 0 0 0 0 0 Non-maskable interrupts LOC: 336945 208438 267680 138102 30869 39594 481144 70316 Local timer interrupts RES: 13214 6855 9075 4379 12955 13070 23612 13817 Rescheduling interrupts CAL: 91 212 217 230 218 217 223 223 Function call interrupts TLB: 1986 613 559 447 2931 4132 3842 3516 TLB shootdowns TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts SPU: 0 0 0 0 0 0 0 0 Spurious interrupts ERR: 709540 MIS: 0
System : ProLiant DL585 G2 Serial No. : XXXXXXXXXXXXXX ROM version : A07 03/11/2009 iLo present : Yes Embedded NICs : 2 NIC1 MAC: XXXXXXXXXXXXXXXXX NIC2 MAC: XXXXXXXXXXXXXXXXX Processor: 0 Name : AMD Opteron Stepping : 3 Speed : 2800 MHz Bus : 0 MHz Core : 2 Thread : 2 Socket : 1 Level2 Cache : 2048 KBytes Status : Ok
Processor: 1 Name : AMD Opteron Stepping : 3 Speed : 2800 MHz Bus : 0 MHz Core : 2 Thread : 2 Socket : 2 Level2 Cache : 2048 KBytes Status : Ok
Processor: 2 Name : AMD Opteron Stepping : 3 Speed : 2800 MHz Bus : 0 MHz Core : 2 Thread : 2 Socket : 3 Level2 Cache : 2048 KBytes Status : Ok
Processor: 3 Name : AMD Opteron Stepping : 3 Speed : 2800 MHz Bus : 0 MHz Core : 2 Thread : 2 Socket : 4 Level2 Cache : 2048 KBytes Status : Ok
Processor total : 4
Memory installed : 16384 MBytes ECC supported : Yes
|  |