lkml.org 
[lkml]   [2009]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] atmel-mci: Unified Atmel MCI drivers (AVR32 & AT91)
Date
From: Rob Emanuele <rob@emanuele.us>

Unification of the atmel-mci driver to support the AT91 processors MCI
interface. The atmel-mci driver currently supports the AVR32 and this patch
adds AT91 support.
Add read/write proof selection switch dependent on chip availability of this
feature.

To use this new driver on a at91 the platform driver for your board needs to
updated.

Signed-off-by: Rob Emanuele <rob@emanuele.us>
[nicolas.ferre@atmel.com indent, Kconfig comment and one printk modification]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
drivers/mmc/host/Kconfig | 16 ++++++++++++----
drivers/mmc/host/atmel-mci.c | 33 ++++++++++++++++++++++++++++++---
2 files changed, 42 insertions(+), 7 deletions(-)

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index b4cf691..e779049 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -124,6 +124,12 @@ config MMC_AU1X

If unsure, say N.

+choice
+ prompt "Atmel SD/MMC Driver"
+ default MMC_ATMELMCI if AVR32
+ help
+ Choose which driver to use for the Atmel MCI Silicon
+
config MMC_AT91
tristate "AT91 SD/MMC Card Interface support"
depends on ARCH_AT91
@@ -134,17 +140,19 @@ config MMC_AT91

config MMC_ATMELMCI
tristate "Atmel Multimedia Card Interface support"
- depends on AVR32
+ depends on AVR32 || ARCH_AT91
help
This selects the Atmel Multimedia Card Interface driver. If
- you have an AT32 (AVR32) platform with a Multimedia Card
- slot, say Y or M here.
+ you have an AT32 (AVR32) or AT91 platform with a Multimedia
+ Card slot, say Y or M here.

If unsure, say N.

+endchoice
+
config MMC_ATMELMCI_DMA
bool "Atmel MCI DMA support (EXPERIMENTAL)"
- depends on MMC_ATMELMCI && DMA_ENGINE && EXPERIMENTAL
+ depends on MMC_ATMELMCI && AVR32 && DMA_ENGINE && EXPERIMENTAL
help
Say Y here to have the Atmel MCI driver use a DMA engine to
do data transfers and thus increase the throughput and
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 7b603e4..065fa81 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -30,6 +30,7 @@
#include <asm/io.h>
#include <asm/unaligned.h>

+#include <mach/cpu.h>
#include <mach/board.h>

#include "atmel-mci-regs.h"
@@ -210,6 +211,18 @@ struct atmel_mci_slot {
set_bit(event, &host->pending_events)

/*
+ * Enable or disable features/registers based on
+ * whether the processor supports them
+ */
+static bool mci_has_rwproof(void)
+{
+ if (cpu_is_at91sam9261() || cpu_is_at91rm9200())
+ return false;
+ else
+ return true;
+}
+
+/*
* The debugfs stuff below is mostly optimized away when
* CONFIG_DEBUG_FS is not set.
*/
@@ -276,8 +289,13 @@ static void atmci_show_status_reg(struct seq_file *s,
[3] = "BLKE",
[4] = "DTIP",
[5] = "NOTBUSY",
+ [6] = "ENDRX",
+ [7] = "ENDTX",
[8] = "SDIOIRQA",
[9] = "SDIOIRQB",
+ [12] = "SDIOWAIT",
+ [14] = "RXBUFF",
+ [15] = "TXBUFE",
[16] = "RINDE",
[17] = "RDIRE",
[18] = "RCRCE",
@@ -285,6 +303,11 @@ static void atmci_show_status_reg(struct seq_file *s,
[20] = "RTOE",
[21] = "DCRCE",
[22] = "DTOE",
+ [23] = "CSTOE",
+ [24] = "BLKOVRE",
+ [25] = "DMADONE",
+ [26] = "FIFOEMPTY",
+ [27] = "XFRDONE",
[30] = "OVRE",
[31] = "UNRE",
};
@@ -849,13 +872,15 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
clkdiv = 255;
}

+ host->mode_reg = MCI_MR_CLKDIV(clkdiv);
+
/*
* WRPROOF and RDPROOF prevent overruns/underruns by
* stopping the clock when the FIFO is full/empty.
* This state is not expected to last for long.
*/
- host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF
- | MCI_MR_RDPROOF;
+ if (mci_has_rwproof())
+ host->mode_reg |= (MCI_MR_WRPROOF | MCI_MR_RDPROOF);

if (list_empty(&host->queue))
mci_writel(host, MR, host->mode_reg);
@@ -1648,8 +1673,10 @@ static int __init atmci_probe(struct platform_device *pdev)
nr_slots++;
}

- if (!nr_slots)
+ if (!nr_slots) {
+ dev_err(&pdev->dev, "init failed: no slot defined\n");
goto err_init_slot;
+ }

dev_info(&pdev->dev,
"Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
--
1.5.3.7


\
 
 \ /
  Last update: 2009-06-23 18:39    [W:0.095 / U:4.844 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site