lkml.org 
[lkml]   [2009]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    Subject[PATCH] [drivers] [SPI] SPI_GPIO: add support for controllers with missing MISO pin
    There are some boards that do not strictly follow SPI standard and use only 3 wires
    (SCLK, MOSI, SS) for connecting some simple auxiliary chips and controls them with GPIO
    based 'spi controller'. In this configuration the MISO line is missing (it is not
    required if the chip does not transfer any data back to host). The example of such
    board is a NCP ARM S3C64XX based machine. This patch adds support for such non-standard
    configuration in GPIO-based SPI controller.

    Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
    Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

    ---

    diff --git a/drivers/spi/spi_gpio.c b/drivers/spi/spi_gpio.c
    index 26bd03e..16f74fd 100644
    --- a/drivers/spi/spi_gpio.c
    +++ b/drivers/spi/spi_gpio.c
    @@ -114,7 +114,10 @@ static inline void setmosi(const struct spi_device *spi, int is_on)

    static inline int getmiso(const struct spi_device *spi)
    {
    - return !!gpio_get_value(SPI_MISO_GPIO);
    + if (gpio_is_valid(SPI_MISO_GPIO))
    + return !!gpio_get_value(SPI_MISO_GPIO);
    + else
    + return 0;
    }

    #undef pdata
    @@ -243,9 +246,11 @@ spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label)
    if (value)
    goto done;

    - value = spi_gpio_alloc(SPI_MISO_GPIO, label, true);
    - if (value)
    - goto free_mosi;
    + if (gpio_is_valid(SPI_MISO_GPIO)) {
    + value = spi_gpio_alloc(SPI_MISO_GPIO, label, true);
    + if (value)
    + goto free_mosi;
    + }

    value = spi_gpio_alloc(SPI_SCK_GPIO, label, false);
    if (value)
    @@ -254,7 +259,8 @@ spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label)
    goto done;

    free_miso:
    - gpio_free(SPI_MISO_GPIO);
    + if (gpio_is_valid(SPI_MISO_GPIO))
    + gpio_free(SPI_MISO_GPIO);
    free_mosi:
    gpio_free(SPI_MOSI_GPIO);
    done:
    @@ -308,7 +314,8 @@ static int __init spi_gpio_probe(struct platform_device *pdev)
    if (status < 0) {
    spi_master_put(spi_gpio->bitbang.master);
    gpio_free:
    - gpio_free(SPI_MISO_GPIO);
    + if (gpio_is_valid(SPI_MISO_GPIO))
    + gpio_free(SPI_MISO_GPIO);
    gpio_free(SPI_MOSI_GPIO);
    gpio_free(SPI_SCK_GPIO);
    spi_master_put(master);
    @@ -332,7 +339,8 @@ static int __exit spi_gpio_remove(struct platform_device *pdev)

    platform_set_drvdata(pdev, NULL);

    - gpio_free(SPI_MISO_GPIO);
    + if (gpio_is_valid(SPI_MISO_GPIO))
    + gpio_free(SPI_MISO_GPIO);
    gpio_free(SPI_MOSI_GPIO);
    gpio_free(SPI_SCK_GPIO);



    \
     
     \ /
      Last update: 2009-06-23 10:59    [W:3.123 / U:0.516 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site