lkml.org 
[lkml]   [2009]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] ide-tape: fix IDE_AFLAG_* atomic accesses
Date
These flags used to be bit numbers and now are single bits in the
->atapi_flags vector. Use them properly.

Spotted-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-tape.c | 43 ++++++++++++++++++++++++++-----------------
1 files changed, 26 insertions(+), 17 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 4ff50cc..a305a88 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -397,7 +397,8 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
if (readpos[0] & 0x4) {
printk(KERN_INFO "ide-tape: Block location is unknown"
"to the tape\n");
- clear_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
+ clear_bit(ilog2(IDE_AFLAG_ADDRESS_VALID),
+ &drive->atapi_flags);
uptodate = 0;
err = IDE_DRV_ERROR_GENERAL;
} else {
@@ -406,7 +407,8 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)

tape->partition = readpos[1];
tape->first_frame = be32_to_cpup((__be32 *)&readpos[4]);
- set_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
+ set_bit(ilog2(IDE_AFLAG_ADDRESS_VALID),
+ &drive->atapi_flags);
}
}

@@ -755,7 +757,7 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
int load_attempted = 0;

/* Wait for the tape to become ready */
- set_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags);
+ set_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT), &drive->atapi_flags);
timeout += jiffies;
while (time_before(jiffies, timeout)) {
if (ide_do_test_unit_ready(drive, disk) == 0)
@@ -831,7 +833,7 @@ static void __ide_tape_discard_merge_buffer(ide_drive_t *drive)
if (tape->chrdev_dir != IDETAPE_DIR_READ)
return;

- clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags);
+ clear_bit(ilog2(IDE_AFLAG_FILEMARK), &drive->atapi_flags);
tape->valid = 0;
if (tape->buf != NULL) {
kfree(tape->buf);
@@ -1124,7 +1126,8 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,

if (tape->chrdev_dir == IDETAPE_DIR_READ) {
tape->valid = 0;
- if (test_and_clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
+ if (test_and_clear_bit(ilog2(IDE_AFLAG_FILEMARK),
+ &drive->atapi_flags))
++count;
ide_tape_discard_merge_buffer(drive, 0);
}
@@ -1179,7 +1182,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);

if (tape->chrdev_dir != IDETAPE_DIR_READ) {
- if (test_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags))
+ if (test_bit(ilog2(IDE_AFLAG_DETECT_BS), &drive->atapi_flags))
if (count > tape->blk_size &&
(count % tape->blk_size) == 0)
tape->user_bs_factor = count / tape->blk_size;
@@ -1195,7 +1198,8 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
/* refill if staging buffer is empty */
if (!tape->valid) {
/* If we are at a filemark, nothing more to read */
- if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
+ if (test_bit(ilog2(IDE_AFLAG_FILEMARK),
+ &drive->atapi_flags))
break;
/* read */
if (idetape_queue_rw_tail(drive, REQ_IDETAPE_READ,
@@ -1213,7 +1217,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
done += todo;
}

- if (!done && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) {
+ if (!done && test_bit(ilog2(IDE_AFLAG_FILEMARK), &drive->atapi_flags)) {
debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);

idetape_space_over_filemarks(drive, MTFSF, 1);
@@ -1347,7 +1351,8 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
ide_tape_discard_merge_buffer(drive, 0);
retval = ide_do_start_stop(drive, disk, !IDETAPE_LU_LOAD_MASK);
if (!retval)
- clear_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags);
+ clear_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT),
+ &drive->atapi_flags);
return retval;
case MTNOP:
ide_tape_discard_merge_buffer(drive, 0);
@@ -1369,9 +1374,11 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
mt_count % tape->blk_size)
return -EIO;
tape->user_bs_factor = mt_count / tape->blk_size;
- clear_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags);
+ clear_bit(ilog2(IDE_AFLAG_DETECT_BS),
+ &drive->atapi_flags);
} else
- set_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags);
+ set_bit(ilog2(IDE_AFLAG_DETECT_BS),
+ &drive->atapi_flags);
return 0;
case MTSEEK:
ide_tape_discard_merge_buffer(drive, 0);
@@ -1516,20 +1523,20 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)

filp->private_data = tape;

- if (test_and_set_bit(IDE_AFLAG_BUSY, &drive->atapi_flags)) {
+ if (test_and_set_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags)) {
retval = -EBUSY;
goto out_put_tape;
}

retval = idetape_wait_ready(drive, 60 * HZ);
if (retval) {
- clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
+ clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name);
goto out_put_tape;
}

idetape_read_position(drive);
- if (!test_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags))
+ if (!test_bit(ilog2(IDE_AFLAG_ADDRESS_VALID), &drive->atapi_flags))
(void)idetape_rewind_tape(drive);

/* Read block size and write protect status from drive. */
@@ -1545,7 +1552,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
if (tape->write_prot) {
if ((filp->f_flags & O_ACCMODE) == O_WRONLY ||
(filp->f_flags & O_ACCMODE) == O_RDWR) {
- clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
+ clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
retval = -EROFS;
goto out_put_tape;
}
@@ -1602,15 +1609,17 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
ide_tape_discard_merge_buffer(drive, 1);
}

- if (minor < 128 && test_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags))
+ if (minor < 128 && test_bit(ilog2(IDE_AFLAG_MEDIUM_PRESENT),
+ &drive->atapi_flags))
(void) idetape_rewind_tape(drive);
+
if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
if (tape->door_locked == DOOR_LOCKED) {
if (!ide_set_media_lock(drive, tape->disk, 0))
tape->door_locked = DOOR_UNLOCKED;
}
}
- clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
+ clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
ide_tape_put(tape);
unlock_kernel();
return 0;
--
1.6.3.1


\
 
 \ /
  Last update: 2009-06-02 09:07    [W:0.101 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site