lkml.org 
[lkml]   [2009]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    Subject2.6.30: hibernation/swsusp lockup due to acpi-cpufreq
    Hi,

    on my aging Thinkpad T42p resume from hibernation
    fails in 2.6.30. There is a backtrace on suspend prior
    to writing out the disk image, but I cannot capture
    it due to lack of a serial port on the T42p. On
    resume the machine is dead after reading the image
    from disk.

    I've bisected this to:

    commit 01599fca6758d2cd133e78f87426fc851c9ea725
    Author: Andrew Morton <akpm@linux-foundation.org>
    Date: Mon Apr 13 10:27:49 2009 -0700

    cpufreq: use smp_call_function_[single|many]() in acpi-cpufreq.c

    I see in git log that this commit is known broken, but the
    resume on my machine is still broken in 2.6.30.

    If I disable CONFIG_X86_ACPI_CPUFREQ suspend/resume works in 2.6.30.

    I include lspci and dmesg below.


    Johannes



    00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
    00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
    00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
    00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
    00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
    00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
    00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
    00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
    00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
    00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
    01:00.0 VGA compatible controller: ATI Technologies Inc M10 NT [FireGL Mobility T2] (rev 80)
    02:00.0 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01)
    02:00.1 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01)
    02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) (rev 03)
    02:02.0 Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01)



    Linux version 2.6.30 (root@void) (gcc version 4.3.3 (Debian 4.3.3-11) ) #3 PREEMPT Tue Jun 16 00:17:11 CEST 2009
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    NSC Geode by NSC
    Cyrix CyrixInstead
    Centaur CentaurHauls
    Transmeta GenuineTMx86
    Transmeta TransmetaCPU
    UMC UMC UMC UMC
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003ff60000 (usable)
    BIOS-e820: 000000003ff60000 - 000000003ff77000 (ACPI data)
    BIOS-e820: 000000003ff77000 - 000000003ff79000 (ACPI NVS)
    BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
    BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
    DMI present.
    last_pfn = 0x3ff60 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CFFFF write-protect
    D0000-DBFFF uncachable
    DC000-DFFFF write-back
    E0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask FC0000000 write-back
    1 base 03FF80000 mask FFFF80000 uncachable
    2 disabled
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    PAT not supported by CPU.
    Warning only 895MB will be used.
    Use a HIGHMEM enabled kernel.
    init_memory_mapping: 0000000000000000-0000000037fa8000
    0000000000 - 0000400000 page 4k
    0000400000 - 0037c00000 page 2M
    0037c00000 - 0037fa8000 page 4k
    kernel direct mapping tables up to 37fa8000 @ 7000-c000
    RAMDISK: 37c44000 - 37fefe13
    Allocated new RAMDISK: 00653000 - 009fee13
    Move RAMDISK from 0000000037c44000 - 0000000037fefe12 to 00653000 - 009fee12
    ACPI: RSDP 000f6d70 00024 (v02 IBM )
    ACPI: XSDT 3ff6a672 0004C (v01 IBM TP-1R 00003230 LTP 00000000)
    ACPI: FACP 3ff6a700 000F4 (v03 IBM TP-1R 00003230 IBM 00000001)
    ACPI Warning (tbfadt-0531): 32/64X length mismatch in Gpe1Block: 0/32 [20090320]
    ACPI Warning (tbfadt-0562): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20090320]
    ACPI: DSDT 3ff6a8e7 0C530 (v01 IBM TP-1R 00003230 MSFT 0100000E)
    ACPI: FACS 3ff78000 00040
    ACPI: SSDT 3ff6a8b4 00033 (v01 IBM TP-1R 00003230 MSFT 0100000E)
    ACPI: ECDT 3ff76e17 00052 (v01 IBM TP-1R 00003230 IBM 00000001)
    ACPI: TCPA 3ff76e69 00032 (v01 IBM TP-1R 00003230 PTL 00000001)
    ACPI: BOOT 3ff76fd8 00028 (v01 IBM TP-1R 00003230 LTP 00000001)
    895MB LOWMEM available.
    mapped low ram: 0 - 37fa8000
    low ram: 0 - 37fa8000
    node 0 low ram: 00000000 - 37fa8000
    node 0 bootmap 00008000 - 0000eff8
    (7 early reservations) ==> bootmem [0000000000 - 0037fa8000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000100000 - 000064f098] TEXT DATA BSS ==> [0000100000 - 000064f098]
    #2 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
    #3 [0000650000 - 0000652128] BRK ==> [0000650000 - 0000652128]
    #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
    #5 [0000653000 - 00009fee13] NEW RAMDISK ==> [0000653000 - 00009fee13]
    #6 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x00037fa8
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x00037fa8
    On node 0 totalpages: 229191
    free_area_init_node: node 0, pgdat c0590410, node_mem_map c1000000
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3967 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223432 pages, LIFO batch:31
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x1008
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    nr_irqs_gsi: 16
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    Allocating PCI resources starting at 50000000 (gap: 40000000:bf800000)
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227399
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    NR_IRQS:288
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Extended CMOS year: 2000
    Fast TSC calibration using PIT
    Detected 1794.244 MHz processor.
    Console: colour VGA+ 80x34
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 899432k/917152k available (3160k kernel code, 17272k reserved, 1552k data, 296k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB)
    vmalloc : 0xf87a8000 - 0xfffa8000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf7fa8000 ( 895 MB)
    .init : 0xc059e000 - 0xc05e8000 ( 296 kB)
    .data : 0xc041619f - 0xc059a2bc (1552 kB)
    .text : 0xc0100000 - 0xc041619f (3160 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3588.48 BogoMIPS (lpj=17942440)
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU: Intel(R) Pentium(R) M processor 1.80GHz stepping 06
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20090320
    ACPI: setting ELCR to 0200 (from 0800)
    net_namespace: 720 bytes
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: Power Resource [PUBS] (on)
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
    pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
    pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
    pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
    pci 0000:00:1d.7: reg 10 32bit mmio: [0xc0000000-0xc00003ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
    pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
    pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
    pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
    pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
    pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
    pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
    pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
    pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
    pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
    pci 0000:00:1f.5: reg 18 32bit mmio: [0xc0000c00-0xc0000dff]
    pci 0000:00:1f.5: reg 1c 32bit mmio: [0xc0000800-0xc00008ff]
    pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
    pci 0000:00:1f.5: PME# disabled
    pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
    pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
    pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
    pci 0000:00:1f.6: PME# disabled
    pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
    pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
    pci 0000:01:00.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff]
    pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    pci 0000:01:00.0: supports D1 D2
    pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
    pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff]
    pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff]
    pci 0000:02:00.0: reg 10 32bit mmio: [0xb0000000-0xb0000fff]
    pci 0000:02:00.0: supports D1 D2
    pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    pci 0000:02:00.1: reg 10 32bit mmio: [0xb1000000-0xb1000fff]
    pci 0000:02:00.1: supports D1 D2
    pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.1: PME# disabled
    pci 0000:02:01.0: reg 10 32bit mmio: [0xc0240000-0xc025ffff]
    pci 0000:02:01.0: reg 14 32bit mmio: [0xc0200000-0xc020ffff]
    pci 0000:02:01.0: reg 18 io port: [0x8000-0x803f]
    pci 0000:02:01.0: reg 30 32bit mmio: [0x000000-0x00ffff]
    pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:02:01.0: PME# disabled
    pci 0000:02:02.0: reg 10 32bit mmio: [0xc0210000-0xc021ffff]
    pci 0000:00:1e.0: transparent bridge
    pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff]
    pci 0000:00:1e.0: bridge 32bit mmio: [0xc0200000-0xcfffffff]
    pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 11 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:00: iomem range 0x0-0x9ffff could not be reserved
    system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
    system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
    system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
    system 00:00: iomem range 0xcc000-0xcffff could not be reserved
    system 00:00: iomem range 0xdc000-0xdffff could not be reserved
    system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
    system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
    system 00:00: iomem range 0xe8000-0xebfff could not be reserved
    system 00:00: iomem range 0xec000-0xeffff could not be reserved
    system 00:00: iomem range 0xf0000-0xfffff could not be reserved
    system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
    system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x107f has been reserved
    system 00:02: ioport range 0x1180-0x11bf has been reserved
    system 00:02: ioport range 0x15e0-0x15ef has been reserved
    system 00:02: ioport range 0x1600-0x162f has been reserved
    system 00:02: ioport range 0x1632-0x167f has been reserved
    system 00:02: ioport range 0x1630-0x1631 has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x3000-0x3fff
    pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff
    pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000e7ffffff
    pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
    pci 0000:02:00.0: IO window: 0x004000-0x0040ff
    pci 0000:02:00.0: IO window: 0x004400-0x0044ff
    pci 0000:02:00.0: PREFETCH window: 0xe8000000-0xebffffff
    pci 0000:02:00.0: MEM window: 0xc4000000-0xc7ffffff
    pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07
    pci 0000:02:00.1: IO window: 0x004800-0x0048ff
    pci 0000:02:00.1: IO window: 0x004c00-0x004cff
    pci 0000:02:00.1: PREFETCH window: 0xec000000-0xefffffff
    pci 0000:02:00.1: MEM window: 0xc8000000-0xcbffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1e.0: IO window: 0x4000-0x8fff
    pci 0000:00:1e.0: MEM window: 0xc0200000-0xcfffffff
    pci 0000:00:1e.0: PREFETCH window: 0x000000e8000000-0x000000efffffff
    pci 0000:00:1e.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
    pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
    pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff]
    pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff]
    pci_bus 0000:02: resource 0 io: [0x4000-0x8fff]
    pci_bus 0000:02: resource 1 mem: [0xc0200000-0xcfffffff]
    pci_bus 0000:02: resource 2 pref mem [0xe8000000-0xefffffff]
    pci_bus 0000:02: resource 3 io: [0x00-0xffff]
    pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
    pci_bus 0000:03: resource 0 io: [0x4000-0x40ff]
    pci_bus 0000:03: resource 1 io: [0x4400-0x44ff]
    pci_bus 0000:03: resource 2 pref mem [0xe8000000-0xebffffff]
    pci_bus 0000:03: resource 3 mem: [0xc4000000-0xc7ffffff]
    pci_bus 0000:07: resource 0 io: [0x4800-0x48ff]
    pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff]
    pci_bus 0000:07: resource 2 pref mem [0xec000000-0xefffffff]
    pci_bus 0000:07: resource 3 mem: [0xc8000000-0xcbffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs...
    Freeing initrd memory: 3759k freed
    Simple Boot Flag at 0x35 set to 0x1
    cpu0(1) debug files 55
    squashfs: version 4.0 (2009/01/31) Phillip Lougher
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    fuse init (API version 7.11)
    msgmni has been set to 1764
    alg: No test for cipher_null (cipher_null-generic)
    alg: No test for ecb(cipher_null) (ecb-cipher_null)
    alg: No test for digest_null (digest_null-generic)
    alg: No test for compress_null (compress_null-generic)
    alg: No test for stdrng (krng)
    io scheduler noop registered
    io scheduler anticipatory registered (default)
    io scheduler deadline registered
    io scheduler cfq registered
    pci 0000:01:00.0: Boot video device
    radeonfb 0000:01:00.0: power state changed by ACPI to D0
    radeonfb 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
    radeonfb: Retrieved PLL infos from BIOS
    radeonfb: Reference=27.00 MHz (RefDiv=6) Memory=320.00 Mhz, System=202.00 MHz
    radeonfb: PLL min 20000 max 35000
    i2c-adapter i2c-1: unable to read EDID block.
    i2c-adapter i2c-1: unable to read EDID block.
    Switched to high resolution mode on CPU 0
    i2c-adapter i2c-1: unable to read EDID block.
    Non-DDC laptop panel detected
    i2c-adapter i2c-2: unable to read EDID block.
    i2c-adapter i2c-2: unable to read EDID block.
    i2c-adapter i2c-2: unable to read EDID block.
    radeonfb: Monitor 1 type LCD found
    radeonfb: Monitor 2 type no found
    radeonfb: panel ID string: 1600x1200
    radeonfb: detected LVDS panel size from BIOS: 1600x1200
    radeondb: BIOS provided dividers will be used
    radeonfb: Dynamic Clock Power Management enabled
    Console: switching to colour frame buffer device 200x75
    radeonfb (0000:01:00.0): ATI Radeon 4e54 "NT"
    power_supply AC: uevent
    power_supply AC: No power supply yet
    power_supply AC: power_supply_changed
    ACPI: AC Adapter [AC] (on-line)
    power_supply AC: power_supply_changed_work
    power_supply AC: power_supply_update_gen_leds 1
    power_supply AC: uevent
    power_supply AC: POWER_SUPPLY_NAME=AC
    power_supply AC: Static prop TYPE=Mains
    power_supply AC: 1 dynamic props
    power_supply AC: prop ONLINE=1
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
    ACPI: Power Button [PWRF]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    ACPI: Lid Switch [LID]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    ACPI: Sleep Button [SLPB]
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/device:03/input/input3
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    Marking TSC unstable due to TSC halts in idle
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI_CPU:00: registered as cooling_device0
    ACPI: Processor [CPU] (supports 8 throttling states)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (50 C)
    power_supply BAT0: uevent
    power_supply BAT0: No power supply yet
    power_supply BAT0: power_supply_changed
    power_supply BAT0: power_supply_changed_work
    ACPI: Battery Slot [BAT0] (battery present)
    power_supply BAT0: power_supply_update_bat_leds 4
    power_supply BAT0: uevent
    power_supply BAT0: POWER_SUPPLY_NAME=BAT0
    power_supply BAT0: Static prop TYPE=Battery
    power_supply BAT0: 13 dynamic props
    power_supply BAT0: prop STATUS=Full
    power_supply BAT0: prop PRESENT=1
    power_supply BAT0: prop TECHNOLOGY=Li-ion
    power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
    power_supply BAT0: prop VOLTAGE_NOW=12390000
    power_supply BAT0: prop CURRENT_NOW=0
    power_supply BAT0: prop POWER_NOW=0
    power_supply BAT0: prop ENERGY_FULL_DESIGN=71280000
    power_supply BAT0: prop ENERGY_FULL=48970000
    power_supply BAT0: prop ENERGY_NOW=48970000
    power_supply BAT0: prop MODEL_NAME=IBM-93P5003
    power_supply BAT0: prop MANUFACTURER=SONY
    power_supply BAT0: prop SERIAL_NUMBER= 1416
    Real Time Clock Driver v1.12b
    Non-volatile memory driver v1.3
    Linux agpgart interface v0.103
    agpgart-intel 0000:00:00.0: Intel 855PM Chipset
    agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [drm] Initialized drm 1.1.0 20060810
    [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial 00:09: activated
    00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
    serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
    serial 0000:00:1f.6: PCI INT B disabled
    loop: module loaded
    Uniform Multi-Platform E-IDE driver
    piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x01)
    pci 0000:00:1f.1: enabling device (0005 -> 0007)
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    pci 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1860-0x1867
    ide1: BM-DMA at 0x1868-0x186f
    Probing IDE interface ide0...
    hda: HTS726060M9AT00, ATA DISK drive
    hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    hda: UDMA/100 mode selected
    Probing IDE interface ide1...
    hdc: UJDA765 DVD/CDRW, ATAPI CD/DVD-ROM drive
    hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    hdc: UDMA/33 mode selected
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide1 at 0x170-0x177,0x376 on irq 15
    ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
    ide-gd driver 1.18
    hda: max request size: 128KiB
    hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=65535/16/63
    hda: cache flushes supported
    hda: hda1 hda2
    ide-cd driver 5.00
    ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.20
    Driver 'sd' needs updating - please use bus_type methods
    Driver 'sr' needs updating - please use bus_type methods
    Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
    Copyright (c) 1999-2006 Intel Corporation.
    e1000 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
    e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit)
    e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
    PPP generic driver version 2.4.2
    PPP Deflate Compression module registered
    PPP BSD Compression module registered
    tun: Universal TUN/TAP device driver, 1.6
    tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0552]
    yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
    yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
    yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21b22, devctl 0x64
    yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x04f8, PCI irq 11
    yenta_cardbus 0000:02:00.0: Socket status: 30000086
    yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
    yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
    yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
    yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0552]
    yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
    yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
    yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21b22, devctl 0x64
    yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x04f8, PCI irq 11
    yenta_cardbus 0000:02:00.1: Socket status: 30000086
    yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
    yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
    yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usbcore: registered new interface driver ums-cypress
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
    cpuidle: using governor ladder
    cpuidle: using governor menu
    usbcore: registered new interface driver hiddev
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
    Registered led device: tpacpi::thinklight
    Registered led device: tpacpi::power
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /devices/virtual/input/input5
    Netfilter messages via NETLINK v0.30.
    nf_conntrack version 0.5.0 (14330 buckets, 57320 max)
    ip_tables: (C) 2000-2006 Netfilter Core Team
    TCP cubic registered
    NET: Registered protocol family 17
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    Using IPI Shortcut mode
    Clocksource tsc unstable (delta = -116160907 ns)
    Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
    serio: Synaptics pass-through port at isa0060/serio1/input0
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
    registered taskstats version 1
    Freeing unused kernel memory: 296k freed
    power_supply AC: uevent
    power_supply AC: POWER_SUPPLY_NAME=AC
    power_supply AC: Static prop TYPE=Mains
    power_supply AC: 1 dynamic props
    power_supply AC: prop ONLINE=1
    power_supply BAT0: uevent
    power_supply BAT0: POWER_SUPPLY_NAME=BAT0
    power_supply BAT0: Static prop TYPE=Battery
    power_supply BAT0: 13 dynamic props
    power_supply BAT0: prop STATUS=Full
    power_supply BAT0: prop PRESENT=1
    power_supply BAT0: prop TECHNOLOGY=Li-ion
    power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
    power_supply BAT0: prop VOLTAGE_NOW=12390000
    power_supply BAT0: prop CURRENT_NOW=0
    power_supply BAT0: prop POWER_NOW=0
    power_supply BAT0: prop ENERGY_FULL_DESIGN=71280000
    power_supply BAT0: prop ENERGY_FULL=48970000
    power_supply BAT0: prop ENERGY_NOW=48970000
    power_supply BAT0: prop MODEL_NAME=IBM-93P5003
    power_supply BAT0: prop MANUFACTURER=SONY
    power_supply BAT0: prop SERIAL_NUMBER= 1416
    uhci_hcd: USB Universal Host Controller Interface driver
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
    uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
    ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
    PM: Starting manual resume from disk
    EXT3-fs: INFO: recovery required on readonly filesystem.
    EXT3-fs: write access will be enabled during recovery.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: recovery complete.
    EXT3-fs: mounted filesystem with writeback data mode.
    udev: starting version 141
    power_supply AC: uevent
    power_supply AC: POWER_SUPPLY_NAME=AC
    power_supply AC: Static prop TYPE=Mains
    power_supply AC: 1 dynamic props
    power_supply AC: prop ONLINE=1
    power_supply BAT0: uevent
    power_supply BAT0: POWER_SUPPLY_NAME=BAT0
    power_supply BAT0: Static prop TYPE=Battery
    power_supply BAT0: 13 dynamic props
    power_supply BAT0: prop STATUS=Full
    power_supply BAT0: prop PRESENT=1
    power_supply BAT0: prop TECHNOLOGY=Li-ion
    power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
    power_supply BAT0: prop VOLTAGE_NOW=12390000
    power_supply BAT0: prop CURRENT_NOW=0
    power_supply BAT0: prop POWER_NOW=0
    power_supply BAT0: prop ENERGY_FULL_DESIGN=71280000
    power_supply BAT0: prop ENERGY_FULL=48970000
    power_supply BAT0: prop ENERGY_NOW=48970000
    power_supply BAT0: prop MODEL_NAME=IBM-93P5003
    power_supply BAT0: prop MANUFACTURER=SONY
    power_supply BAT0: prop SERIAL_NUMBER= 1416
    cfg80211: Using static regulatory domain info
    cfg80211: Regulatory domain: US
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
    (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
    cfg80211: Calling CRDA for country: US
    ath5k 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    ath5k 0000:02:02.0: registered as 'phy0'
    phy0: Selected rate control algorithm 'minstrel'
    Registered led device: ath5k-phy0::rx
    Registered led device: ath5k-phy0::tx
    ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43)
    ath5k phy0: RF5112B multiband radio found (0x36)
    Adding 1048568k swap on /dev/mapper/vg0-cswap. Priority:-1 extents:1 across:1048568k
    EXT3 FS on dm-2, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda1, internal journal
    EXT3-fs: mounted filesystem with writeback data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on dm-3, internal journal
    EXT3-fs: mounted filesystem with writeback data mode.
    Bluetooth: Core ver 2.15
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP ver 2.13
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM ver 1.11
    Bluetooth: SCO (Voice Link) ver 0.6
    Bluetooth: SCO socket layer initialized
    Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    Bluetooth: BNEP filters: protocol multicast
    agpgart-intel 0000:00:00.0: AGP 2.0 bridge
    agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode
    radeonfb 0000:01:00.0: putting AGP V2 device into 2x mode
    [drm] Setting GART location based on new memory map
    [drm] Loading R300 Microcode
    [drm] Num pipes: 1
    [drm] writeback test succeeded in 2 usecs
    nfsd: last server has exited, flushing export cache
    e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX


    \
     
     \ /
      Last update: 2009-06-16 01:29    [W:0.068 / U:61.600 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site