lkml.org 
[lkml]   [2009]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [git pull] drm v2.6.31 merge (part 1)
From
On Sat, Jun 13, 2009 at 7:45 AM, Dave Airlie<airlied@gmail.com> wrote:
> On Fri, Jun 12, 2009 at 4:28 PM, Dave Airlie<airlied@linux.ie> wrote:
>>
>> Hi Linus,
>>
>> Please pull the 'drm-linus' branch from
>> ssh://master.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git drm-linus
>>
>
> Did I do something wrong again? or are you just holding off on this, didn't see
> it hit the last bunch of merges.

Ah oops, /me reads btrfs adventures.

Dave.

>
> Dave.
>
>> This contains the Intel tree merge (merged properly I haven't rebased or
>> touched it), which contains numerous GEM bugfixes + support for a new
>> chipset. AMD patches for new r600 chipset support. A more flexible drm
>> debugging system to decrease the firehose effect enabling drm debugging
>> has, it also contains some paving the way patches for part 2 of the merge.
>>
>> It also contains one AGP patch for supporting those new chips, and a PNP
>> patch to add a new interface that intel kms relies on now, all the
>> signoffs for the pnp code should be correct.
>>
>> Part 2 will contains an initial radeon KMS driver and the TTM memory
>> manager, its quite large so I don't want to include it all in this pull.
>> The initial radeon KMS code enable switch will hide under staging for now
>> for one driver release while we stabilise it in-tree, its not in a bad
>> state but its a lot of new code and we'd hate for anyone to fall over it
>> my accident. Its quite well separated from the old radeon code so
>> shouldn't fall over too much. I'll send the part 2 pull early next week.
>>
>> Dave.
>>
>>  drivers/char/agp/intel-agp.c           |   16 +-
>>  drivers/gpu/drm/drm_bufs.c             |    3 +-
>>  drivers/gpu/drm/drm_edid.c             |   74 +----
>>  drivers/gpu/drm/drm_gem.c              |    2 +-
>>  drivers/gpu/drm/drm_hashtab.c          |    4 +
>>  drivers/gpu/drm/drm_mm.c               |  165 +++++++--
>>  drivers/gpu/drm/drm_modes.c            |   18 +-
>>  drivers/gpu/drm/drm_stub.c             |   15 +
>>  drivers/gpu/drm/i915/i915_dma.c        |   67 ++--
>>  drivers/gpu/drm/i915/i915_drv.h        |   48 ++-
>>  drivers/gpu/drm/i915/i915_gem.c        |  156 ++++++---
>>  drivers/gpu/drm/i915/i915_gem_tiling.c |  152 ++++++++
>>  drivers/gpu/drm/i915/i915_irq.c        |  190 +++++++++-
>>  drivers/gpu/drm/i915/i915_reg.h        |  616 ++++++++++++++++++++++++++++++-
>>  drivers/gpu/drm/i915/i915_suspend.c    |   20 +
>>  drivers/gpu/drm/i915/intel_bios.c      |   86 +++++-
>>  drivers/gpu/drm/i915/intel_bios.h      |  101 +++++-
>>  drivers/gpu/drm/i915/intel_crt.c       |   76 ++++-
>>  drivers/gpu/drm/i915/intel_display.c   |  645 ++++++++++++++++++++++++++++++--
>>  drivers/gpu/drm/i915/intel_fb.c        |   26 +-
>>  drivers/gpu/drm/i915/intel_hdmi.c      |   33 ++-
>>  drivers/gpu/drm/i915/intel_lvds.c      |  151 ++++++--
>>  drivers/gpu/drm/i915/intel_sdvo.c      |  110 ++++--
>>  drivers/gpu/drm/i915/intel_tv.c        |    3 +
>>  drivers/gpu/drm/radeon/r600_cp.c       |   42 ++-
>>  drivers/gpu/drm/radeon/radeon_cp.c     |    2 +-
>>  drivers/gpu/drm/radeon/radeon_drv.h    |    1 +
>>  drivers/gpu/drm/via/via_dmablit.c      |    6 +-
>>  drivers/pnp/resource.c                 |   18 +
>>  include/drm/drmP.h                     |  126 ++++---
>>  include/drm/drm_hashtab.h              |    2 +
>>  include/drm/drm_mm.h                   |   90 +++++
>>  include/drm/drm_pciids.h               |    9 +
>>  include/linux/pnp.h                    |    2 +
>>  34 files changed, 2677 insertions(+), 398 deletions(-)
>>  create mode 100644 include/drm/drm_mm.h
>>
>> commit 3c24475c1e4e8d10e50df161d8c4f1d382997a7c
>> Author: Jerome Glisse <glisse@freedesktop.org>
>> Date:   Wed Apr 8 18:34:28 2009 +0200
>>
>>    drm: include kernel list header file in hashtab header
>>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit f2cb5d86e1af175a9b210241800f03a447f92621
>> Author: Jerome Glisse <glisse@freedesktop.org>
>> Date:   Wed Apr 8 17:16:24 2009 +0200
>>
>>    drm: Export hash table functionality.
>>
>>    add exports so TTM module can use these functions.
>>
>>    Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit 249d6048ca98b5452105b0824abac1275661b8e3
>> Author: Jerome Glisse <glisse@freedesktop.org>
>> Date:   Wed Apr 8 17:11:16 2009 +0200
>>
>>    drm: Split out the mm declarations in a separate header. Add atomic operations.
>>
>>    this is a TTM preparation patch, it rearranges the mm and
>>    add operations needed to do mm operations in atomic context.
>>
>>    Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit 715cbb05c935e8a4306a730d14a72d5af881523e
>> Author: Alex Deucher <alexdeucher@gmail.com>
>> Date:   Fri Jun 12 15:55:44 2009 +1000
>>
>>    drm/radeon: add support for RV790.
>>
>>    This adds the PCI IDs for the rv790 which are equiv to the rv770.
>>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit 2a71ebcd85bcc4d6607f577f23a491f796c30e82
>> Author: Alex Deucher <alexdeucher@gmail.com>
>> Date:   Fri Jun 12 15:53:10 2009 +1000
>>
>>    drm/radeon: add rv740 drm support.
>>
>>    This adds drm support for the RV740 family of chips to the r600 support code.
>>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit fbe0efb869efde8d847ede3a925230ef88910086
>> Author: Kristian Høgsberg <krh@redhat.com>
>> Date:   Tue Jun 9 01:50:41 2009 +1000
>>
>>    drm_calloc_large: check right size, check integer overflow, use GFP_ZERO
>>
>>    Previously we would check size instead of size * nmemb, and so would
>>    never hit the vmalloc path.  Also add integer overflow check as in kcalloc,
>>    and allocate GFP_ZERO pages instead of memset()ing them.
>>
>>    Signed-off-by: Kristian Høgsberg <krh@redhat.com>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit 61f11699e7a92d932b31ded3715ad4f70eb26ef2
>> Author: Keith Packard <keithp@keithp.com>
>> Date:   Sat May 30 20:42:27 2009 -0700
>>
>>    drm: Eliminate magic I2C frobbing when reading EDID
>>
>>    This code depends on the underlying I2C adapter using the bit-banging algo,
>>    which may not be the case. If specific encoders require this mechanism, they
>>    should build a custom I2C algo that implements this workaround, rather than
>>    having it in the general path.
>>
>>    Signed-off-by: Keith Packard <keithp@keithp.com>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit 7ff145593d808a371924652c8d6a15fb75ce2250
>> Author: Dave Airlie <airlied@linux.ie>
>> Date:   Wed Apr 22 18:52:14 2009 +1000
>>
>>    drm/i915: duplicate desired mode for use by fbcon.
>>
>>    duplicate the mode into fbcon storage, so when we free modes later
>>    we don't just lose this.
>>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit c5c07550d41abe86d109430e718f2007113031f8
>> Author: Figo.zhang <figo1802@gmail.com>
>> Date:   Sat Jun 6 18:26:26 2009 +0800
>>
>>    drm/via: vfree() no need checking before calling it
>>
>>    vfree() does it's own NULL checking, no need for explicit check before
>>    calling it.
>>
>>    Signed-off-by: Figo.zhang <figo1802@gmail.com>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit be25ed9c5cc06e1d17aa97e41daf88f0b46143e6
>> Author: yakui_zhao <yakui.zhao@intel.com>
>> Date:   Tue Jun 2 14:13:55 2009 +0800
>>
>>    drm: Replace DRM_DEBUG with DRM_DEBUG_DRIVER in i915 driver
>>
>>    Replace the DRM_DEBUG with the DRM_DEBUG_DRIVER to print the debug info
>>    in i915 driver.
>>
>>    Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit f053185948a1bd16329433f5371809765086c1ec
>> Author: yakui_zhao <yakui.zhao@intel.com>
>> Date:   Tue Jun 2 14:12:47 2009 +0800
>>
>>    drm: Replace DRM_DEBUG with DRM_DEBUG_MODE in drm_mode
>>
>>    Replace the DRM_DEBUG with DRM_DEBUG_MODE macro to print the info in drm_mode.
>>
>>    airlied:- fixed up to remove a conflicting #define
>>    Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit 342dc382c451f75ea202a65e6f529bdff6d184cd
>> Author: yakui_zhao <yakui.zhao@intel.com>
>> Date:   Tue Jun 2 14:12:00 2009 +0800
>>
>>    drm/i915: Replace DRM_DEBUG with DRM_DEBUG_KMS in intel_sdvo
>>
>>    Use the DRM_DEBUG_KMS/DEBUG_LOG_KMS to print the debug info for
>>    SDVO device.
>>
>>    Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit 7fb85bfb54a64e9dd82ee4a79022c38ab58f21a0
>> Author: yakui_zhao <yakui.zhao@intel.com>
>> Date:   Tue Jun 2 14:10:49 2009 +0800
>>
>>    drm/i915: replace DRM_DEBUG with DRM_DEBUG_KMS in intel_lvds
>>
>>    Use the DRM_DEBUG_KMS macro definition to print the debug info for
>>    the LVDS.
>>
>>    Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit 4fefcb27050b98c97b1c32bc710fc2f874449dee
>> Author: yakui_zhao <yakui.zhao@intel.com>
>> Date:   Tue Jun 2 14:09:47 2009 +0800
>>
>>    drm: add separate drm debugging levels
>>
>>    Now all the DRM debug info will be reported if the boot option of
>>    "drm.debug=1" is added. Sometimes it is inconvenient to get the debug
>>    info in KMS mode. We will get too much unrelated info.
>>
>>    This will separate several DRM debug levels and the debug level can be used
>>    to print the different debug info. And the debug level is controlled by the
>>    module parameter of drm.debug
>>
>>    In this patch it is divided into four debug levels;
>>                drm_core, drm_driver, drm_kms, drm_mode.
>>
>>    At the same time we can get the different debug info by changing the debug
>>    level. This can be done by adding the module parameter. Of course it can
>>    be changed through the /sys/module/drm/parameters/debug after the system is
>>    booted.
>>
>>    Four debug macro definitions are provided.
>>        DRM_DEBUG(fmt, args...)
>>        DRM_DEBUG_DRIVER(prefix, fmt, args...)
>>        DRM_DEBUG_KMS(prefix, fmt, args...)
>>        DRM_DEBUG_MODE(prefix, fmt, args...)
>>
>>    When the boot option of "drm.debug=4" is added, it will print the debug info
>>    using DRM_DEBUG_KMS macro definition.
>>    When the boot option of "drm.debug=6" is added, it will print the debug info
>>    using DRM_DEBUG_KMS/DRM_DEBUG_DRIVER.
>>
>>    Sometimes we expect to print the value of an array.
>>    For example: SDVO command,
>>    In such case the following four DRM debug macro definitions are added:
>>        DRM_LOG(fmt, args...)
>>        DRM_LOG_DRIVER(fmt, args...)
>>        DRM_LOG_KMS(fmt, args...)
>>        DRM_LOG_MODE(fmt, args...)
>>
>>    Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit df4f7fe7bd516b3833e25c692c3970e22038a6ca
>> Author: Dave Airlie <airlied@redhat.com>
>> Date:   Thu Jun 11 16:16:10 2009 +1000
>>
>>    radeon: remove _DRM_DRIVER from the preadded sarea map
>>
>>    This shouldn't be there and is what broke r600 late in the 2.6.30
>>    release cycle with Ben's patch.
>>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit 2ff2e8a3e1898e692b604424c384f134009dea80
>> Author: Ben Skeggs <bskeggs@redhat.com>
>> Date:   Tue May 26 10:35:52 2009 +1000
>>
>>    drm: don't associate _DRM_DRIVER maps with a master
>>
>>    A driver will use the _DRM_DRIVER map flag to indicate that it wants
>>    to be responsible for removing the map itself, bypassing the DRM's
>>    automagic cleanup code.
>>
>>    Since the multi-master changes this has been broken, resulting in some
>>    drivers having their registers unmapped before it's finished with them.
>>
>>    Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit b798b1fe3b6436275ad1b517a6823d55e3b75c22
>> Author: Robert P. J. Day <rpjday@crashcourse.ca>
>> Date:   Wed Jun 10 12:43:49 2009 -0700
>>
>>    drm: simplify kcalloc() call to kzalloc().
>>
>>    Calls to kcalloc() for a single element can be simplified to calls to
>>    kzalloc().
>>
>>    Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
>>    Cc: Dave Airlie <airlied@linux.ie>
>>    Cc: Eric Anholt <eric@anholt.net>
>>    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit 1bcbf3948876e31a8ece28597dec447611ad9c8b
>> Author: Pavel Roskin <proski@gnu.org>
>> Date:   Wed Jun 10 12:43:48 2009 -0700
>>
>>    intelfb: fix spelling of "CLOCK"
>>
>>    Signed-off-by: Pavel Roskin <proski@gnu.org>
>>    Cc: Eric Anholt <eric@anholt.net>
>>    Cc: Dave Airlie <airlied@linux.ie>
>>    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit dcae3626d031fe6296b1e96a16f986193a41f840
>> Author: Roel Kluin <roel.kluin@gmail.com>
>> Date:   Wed Jun 10 12:43:48 2009 -0700
>>
>>    drm: fix LOCK_TEST_WITH_RETURN macro
>>
>>    When this macro isn't called with 'file_priv' this will result in a build
>>    failure.
>>
>>    Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
>>    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
>>    Signed-off-by: Dave Airlie <airlied@redhat.com>
>>
>> commit 03d6069912babc07a3da20e715dd6a5dc8f0f867
>> Author: Keith Packard <keithp@keithp.com>
>> Date:   Fri Jun 5 18:19:56 2009 -0700
>>
>>    drm/i915: Hook connector to encoder during load detection (fixes tv/vga detect)
>>
>>    With the DRM-driven DPMS code, encoders are considered idle unless a
>>    connector is hooked to them, so mode setting is skipped. This makes load
>>    detection fail as none of the hardware is enabled.
>>
>>    Signed-off-by: Keith Packard <keithp@keithp.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 2939e1f5331455d17a4a704dd6210e1474002545
>> Author: Chris Wilson <chris@chris-wilson.co.uk>
>> Date:   Sat Jun 6 09:46:03 2009 +0100
>>
>>    drm/i915: NOMEM->NOSPC
>>
>>    To differentiate between encountering an out-of-memory error with running
>>    out of space in the aperture, use ENOSPC for the later.
>>
>>    Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 21d509e339565c82887733c02465bb7f5866c8f5
>> Author: Chris Wilson <chris@chris-wilson.co.uk>
>> Date:   Sat Jun 6 09:46:02 2009 +0100
>>
>>    drm/i915: use I915_GEM_GPU_DOMAINS
>>
>>    Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit b1ce786cb85280490ca3c29a62ddf8608826b414
>> Author: Chris Wilson <chris@chris-wilson.co.uk>
>> Date:   Sat Jun 6 09:46:00 2009 +0100
>>
>>    drm/i915: no need to hold mutex for object lookup
>>
>>    Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 1f803ee5cea67d2387aeedb4b07e645a743729de
>> Author: Chris Wilson <chris@chris-wilson.co.uk>
>> Date:   Sat Jun 6 09:45:59 2009 +0100
>>
>>    drm/i915: Call drm_vblank_post_modeset() on error paths.
>>
>>    Ensure that the drm_vblank_pre_modeset() is always balanced by
>>    drm_vblank_post_modeset() within intel_crtc_mode_set().
>>
>>    Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 5f26a2c7ad6eba97141e8372f3def282f934b169
>> Author: Chris Wilson <chris@chris-wilson.co.uk>
>> Date:   Sat Jun 6 09:45:58 2009 +0100
>>
>>    drm/i915: OR in the COMMAND read domain for the batch buffer.
>>
>>    The batch buffer may be shared with another read buffer, so we should not
>>    ignore any previously set domains, but just or in the command domain (and
>>    check that the buffer is not writable).
>>
>>    Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 83d60795157c83389e6aaa0532d5e19afa976a24
>> Author: Chris Wilson <chris@chris-wilson.co.uk>
>> Date:   Sat Jun 6 09:45:57 2009 +0100
>>
>>    drm/i915: Sanity check execbuffer arguments before touching state.
>>
>>    By sending a broken execbuffer (its length was not suitably aligned) I
>>    triggered an operation upon a freed object. The invalid alignment was
>>    discovered after updating the write_domain on the object but before the
>>    object was placed on the active queue. So during the unwind process
>>    following the error, the now freed object attempts to flush its
>>    non-existent, but outstanding, GPU writes causing this use-after-free.
>>
>>    [drm:i915_dispatch_gem_execbuffer] *ERROR* alignment
>>    [drm:i915_gem_execbuffer] *ERROR* dispatch failed -22
>>    WARNING: at lib/kref.c:43 warn_slowpath_null+0x10/0x15()
>>    Modules linked in:
>>    Pid: 4552, comm: lt-csi-drm Not tainted 2.6.30-rc6 #423
>>    Call Trace:
>>     [<c0119ef3>] warn_slowpath_fmt+0x57/0x6d
>>     [<c014de24>] ? get_pageblock_migratetype+0x18/0x1e
>>     [<c014e8fd>] ? free_hot_page+0xa/0xc
>>     [<c014e915>] ? __free_pages+0x16/0x1f
>>     [<c0153ebf>] ? shmem_truncate_range+0x63e/0x656
>>     [<c015fb2f>] ? slob_page_alloc+0x146/0x1c8
>>     [<c0119f19>] warn_slowpath_null+0x10/0x15
>>     [<c01f55f2>] kref_get+0x1b/0x21
>>     [<c02605db>] i915_gem_object_move_to_active+0x1f/0x56
>>     [<c0261302>] i915_add_request+0x156/0x19a
>>     [<c026136e>] i915_gem_object_flush_gpu_write_domain+0x28/0x3f
>>     [<c0261eca>] i915_gem_object_unbind+0x4a/0x124
>>     [<c0261fd7>] i915_gem_free_object+0x33/0x9b
>>     [<c0250d6b>] drm_gem_object_free+0x28/0x4a
>>     [<c0250d43>] ? drm_gem_object_free+0x0/0x4a
>>     [<c01f55ce>] kref_put+0x38/0x41
>>     [<c0250cbf>] drm_gem_object_unreference+0x11/0x13
>>     [<c0250d06>] drm_gem_object_handle_unreference+0x1e/0x21
>>     [<c0250d13>] drm_gem_object_release_handle+0xa/0xe
>>     [<c01f3e6b>] idr_for_each+0x5f/0x98
>>     [<c0250d09>] ? drm_gem_object_release_handle+0x0/0xe
>>     [<c0250daf>] drm_gem_release+0x22/0x34
>>     [<c025046f>] drm_release+0x1e8/0x3c4
>>     [<c0162d25>] __fput+0xaf/0x146
>>     [<c0162dce>] fput+0x12/0x14
>>     [<c01605ef>] filp_close+0x48/0x52
>>     [<c011b182>] put_files_struct+0x57/0x9b
>>     [<c011b1e4>] exit_files+0x1e/0x20
>>     [<c011c6b6>] do_exit+0x16d/0x511
>>     [<c03704ab>] ? __schedule+0x3d4/0x3e5
>>     [<c0103f0d>] ? handle_irq+0xd/0x69
>>     [<c011caa7>] do_group_exit+0x4d/0x73
>>     [<c011cae0>] sys_exit_group+0x13/0x17
>>     [<c010268c>] sysenter_do_call+0x12/0x2b
>>
>>    Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit fa0864b26b4bfa1dd4bb78eeffbc1f398cb56425
>> Author: Michael Cousin <mika.cousin@gmail.com>
>> Date:   Fri Jun 5 21:16:22 2009 +0200
>>
>>    drm/i915: Skip lvds with Aopen i945GTt-VFA
>>
>>    Signed-off-by: Michael Cousin <mika.cousin@gmail.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 80a538e49daddbf3bf783f3464e91bd3181957b2
>> Author: Zhenyu Wang <zhenyuw@linux.intel.com>
>> Date:   Mon Jun 8 14:40:20 2009 +0800
>>
>>    drm/i915: Enable probe on new chipset
>>
>>    Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 036a4a7d9272582fc7370359515d807393e2f728
>> Author: Zhenyu Wang <zhenyuw@linux.intel.com>
>> Date:   Mon Jun 8 14:40:19 2009 +0800
>>
>>    drm/i915: handle interrupt on new chipset
>>
>>    Update interrupt handling methods for IGDNG with new registers
>>    for display and graphics interrupt functions. As we won't use
>>    irq-based vblank sync in dri2, so display interrupt on new chip
>>    will be used for hotplug only in future.
>>
>>    Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit d765898970f35acef960581f678b9da9d5c779fa
>> Author: Jesse Barnes <jbarnes at virtuousgeek.org>
>> Date:   Fri Jun 5 14:41:29 2009 +0000
>>
>>    drm/i915: enable MCHBAR if needed
>>
>>    Using the new PNP resource checking code, this patch allows the i915
>>    driver to allocate MCHBAR space if needed and use the BAR to determine
>>    current memory settings.
>>
>>    [apw@canonical.com: moved to the new generic PNP resource interface]
>>    Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
>>    Signed-off-by: Andy Whitcroft <apw@canonical.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>>    failure to update-index after git-am --reject to hand-apply
>>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 1b8e69662e1a086878bf930a6042daf7f8a076cc
>> Author: Bjorn Helgaas <bjorn.helgaas at hp.com>
>> Date:   Fri Jun 5 14:37:23 2009 +0000
>>
>>    pnp: add PNP resource range checking function
>>
>>    Add a PNP resource range check function, indicating whether a resource
>>    has been assigned to any device.
>>
>>    Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
>>    [apw@canonical.com: fixed up exports et al]
>>    Signed-off-by: Andy Whitcroft <apw@canonical.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit b66d18ddb16603d1e1ec39cb2ff3abf3fd212180
>> Author: Jesse Barnes <jbarnes@virtuousgeek.org>
>> Date:   Fri May 15 14:11:48 2009 -0700
>>
>>    drm/i915: avoid non-atomic sysrq execution
>>
>>    The sysrq functions are executed in hardirq context, so we shouldn't be
>>    calling sleeping functions from them, like mutex_locks or memory
>>    allocations.
>>
>>    Fix up the i915 sysrq handler to avoid this.
>>
>>    Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 42c2798b35b95c471877133e19ccc3cab00e9b65
>> Author: Jesse Barnes <jbarnes@virtuousgeek.org>
>> Date:   Tue May 5 13:13:16 2009 -0700
>>
>>    drm/i915: apply G45 vblank count code to all G4x chips and fix max_frame_count
>>
>>    All G4x and newer chips use the new style frame count register, with a
>>    full 32 bit frame count.  Update the code to reflect this.
>>
>>    Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 70aa96ca2d8d938fc036ef8fd189b0151f4fc3ba
>> Author: Jarod Wilson <jarod@redhat.com>
>> Date:   Wed May 27 17:20:39 2009 -0400
>>
>>    drm/i915: add ignore lvds quirk info for AOpen Mini PC
>>
>>    Fix a FIXME in the intel LVDS bring-up code, adding the appropriate
>>    blacklist entry for the AOpen Mini PC, courtesy of a dmidecode
>>    dump from Florian Demmer.
>>
>>    Signed-off-by: Jarod Wilson <jarod@redhat.com>
>>    CC: Florian Demmer <florian@demmer.org>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 714605e4a05787c51a5ac36c926d2169cfdfbfba
>> Author: yakui_zhao <yakui.zhao@intel.com>
>> Date:   Sun May 31 17:18:07 2009 +0800
>>
>>    drm/i915: Initialize the SDVO device based on the sdvo info parsed from VBT
>>
>>    http://bugs.freedesktop.org/show_bug.cgi?id=20429
>>
>>    Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
>>    [anholt: Massive cleanup of the slave addr function]
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 9b9d172d06b0f2d51cc9431e2c6c3055f0cf10ef
>> Author: yakui_zhao <yakui.zhao@intel.com>
>> Date:   Sun May 31 17:17:17 2009 +0800
>>
>>    drm/i915: parse VBT general definition block to get the SDVO device info
>>
>>    The general definition block contains the child device tables, which include
>>    the SDVO device info. For example: device slave address, device dvo port,
>>    device type.
>>
>>    We will get the info of SDVO device by parsing the general definition blocks.
>>    Only when a valid slave address is found, it is regarded as the SDVO device.
>>    And the info of DVO port and slave address is recorded.
>>
>>    http://bugs.freedesktop.org/show_bug.cgi?id=20429
>>
>>    Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 59a036cfbd29aadf40d2b754cfebee2a96268752
>> Author: yakui_zhao <yakui.zhao@intel.com>
>> Date:   Sun May 31 17:16:22 2009 +0800
>>
>>    drm/i915: Add the structure of child_device_config in video BIOS tables.
>>
>>    Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 040d87f15a0129242463d3ed7c48381505f596e2
>> Author: Keith Packard <keithp@keithp.com>
>> Date:   Sat May 30 20:42:33 2009 -0700
>>
>>    drm/i915: Add Display Port register defines
>>
>>    This adds the register definitions for the display port enable register
>>    along with those for the GMCH and Link M/N ratios required to drive display
>>    port outputs.
>>
>>    Signed-off-by: Keith Packard <keithp@keithp.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 2245fda810f870dce9b030e6aa604320abba53a5
>> Author: Keith Packard <keithp@keithp.com>
>> Date:   Sat May 30 20:42:29 2009 -0700
>>
>>    drm/i915: Don't trim cursor addresses to 11 bits
>>
>>    We can safely assume that cursor addresses will not extend beyond the
>>    addressable screen dimensions; setting the additional bits is harmless in
>>    any case.
>>
>>    Signed-off-by: Keith Packard <keithp@keithp.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit cb66c692d1ae257f32dc7f6085cf9cb9f2f6bab8
>> Author: Ma Ling <ling.ma@intel.com>
>> Date:   Sun May 31 16:58:32 2009 +0800
>>
>>    drm/i915: Set correct TV detection voltage level override values
>>
>>    We detect TV connect status by setting DAC voltage level override
>>    values as 0.7 voltage for DAC_A/B/C. The corresponding 2-bits shold be 0x2,
>>    In order correctly to set last bit as 0, at first we must clean it.
>>
>>    It fixed freedesktop.org bug #21204
>>
>>    Signed-off-by: Ma Ling <ling.ma@intel.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 541998a18b72d2cac48b3369fa4540116ff3f0a8
>> Author: Zhenyu Wang <zhenyuw@linux.intel.com>
>> Date:   Fri Jun 5 15:38:44 2009 +0800
>>
>>    drm/i915: Add LVDS support for IGDNG
>>
>>    Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 30ad48b7334a2eb2edf22f6c91f7b3f22a22a837
>> Author: Zhenyu Wang <zhenyuw@linux.intel.com>
>> Date:   Fri Jun 5 15:38:43 2009 +0800
>>
>>    drm/i915: Add HDMI support on IGDNG
>>
>>    Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 2c07245fb8f7f0a282282e5a9747e46defdb2cc7
>> Author: Zhenyu Wang <zhenyuw@linux.intel.com>
>> Date:   Fri Jun 5 15:38:42 2009 +0800
>>
>>    drm/i915: enable kernel modesetting on IGDNG
>>
>>    This adds kernel mode setting on IGDNG with VGA output support.
>>    Note that suspend/resume doesn't work yet.
>>
>>    Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 2cce0d8740f0d1454d012401257d96c513ce358f
>> Author: Zhenyu Wang <zhenyuw@linux.intel.com>
>> Date:   Fri Jun 5 15:38:41 2009 +0800
>>
>>    drm/i915: Disable tiling on IGDNG for now
>>
>>    Swizzle bit detection not working right on it.
>>
>>    Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit e170b030dcd6aed11dde2d124c09991ec771f529
>> Author: Zhenyu Wang <zhenyuw@linux.intel.com>
>> Date:   Fri Jun 5 15:38:40 2009 +0800
>>
>>    drm/i915: Disable opregion on IGDNG for now
>>
>>    Disable OpRegion support for now until verified on new chipsets.
>>
>>    Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit b9055052d3e0388b4a5e8c3e0bbab665c5996f50
>> Author: Zhenyu Wang <zhenyuw@linux.intel.com>
>> Date:   Fri Jun 5 15:38:38 2009 +0800
>>
>>    drm/i915: Add new chipset register definitions
>>
>>    Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 280da227c870a50f669de0c8d46bfb2c62da9995
>> Author: Zhenyu Wang <zhenyuw@linux.intel.com>
>> Date:   Fri Jun 5 15:38:37 2009 +0800
>>
>>    drm/i915: Add chipset/feature defines for for new chipsets
>>
>>    Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
>>    [anholt: dropped drm_pciids.h hunk to avoid loading an incomplete driver]
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit 32cb055b57eab803ea82b76dc913b0378e5af145
>> Author: Zhenyu Wang <zhenyuw@linux.intel.com>
>> Date:   Fri Jun 5 15:38:36 2009 +0800
>>
>>    agp/intel: Add support for new chipsets
>>
>>    Both desktop and mobile versions are added.
>>
>>    Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>
>> commit b962442e46a9340bdbc6711982c59ff0cc2b5afb
>> Author: Eric Anholt <eric@anholt.net>
>> Date:   Wed Jun 3 07:27:35 2009 +0000
>>
>>    drm/i915: Change GEM throttling to be 20ms like the comment says.
>>
>>    keithp didn't like the original 20ms plan because a cooperative client could
>>    be starved by an uncooperative client.  There may even have been problems
>>    with cooperative clients versus cooperative clients.  So keithp changed
>>    throttle to just wait for the second to last seqno emitted by that client.
>>    It worked well, until we started getting more round-trips to the server
>>    due to DRI2 -- the server throttles in BlockHandler, and so if you did more
>>    than one round trip after finishing your frame, you'd end up unintentionally
>>    syncing to the swap.
>>
>>    Fix this by keeping track of the client's requests, so the client can wait
>>    when it has an outstanding request over 20ms old.  This should have
>>    non-starving behavior, good behavior in the presence of restarts, and less
>>    waiting.  Improves high-settings openarena performance on my GM45 by 50%.
>>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>    Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
>>
>> commit 1fd1c624362819ecc36db2458c6a972c48ae92d6
>> Author: Eric Anholt <eric@anholt.net>
>> Date:   Wed Jun 3 07:26:58 2009 +0000
>>
>>    drm/i915: Save/restore cursor state on suspend/resume.
>>
>>    This may fix cursor corruption in X on resume, which would persist until
>>    the cursor was hidden and then shown again.
>>
>>    V2: Also include the cursor control regs.
>>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>>    Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
>>
>> commit 0e7ddf7eeeef5aea85412120539ab5369577faeb
>> Author: Eric Anholt <eric@anholt.net>
>> Date:   Thu Jun 4 11:18:14 2009 +0000
>>
>>    drm/i915: Remove a bad BUG_ON in the fence management code.
>>
>>    This could be triggered by a gtt mapping fault on 965 that decides to
>>    remove the fence from another object that happens to be active currently.
>>    Since the other object doesn't rely on the fence reg for its execution, we
>>    don't wait for it to finish.  We'll soon be not waiting on 915 most of the
>>    time as well, so just drop the BUG_ON.
>>
>>    Signed-off-by: Eric Anholt <eric@anholt.net>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2009-06-13 01:43    [W:0.149 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site