lkml.org 
[lkml]   [2009]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 14/14] ide: unify interrupt reason checking
Date
Add ide_check_ireason() function that handles all ATAPI devices. Move
the ATAPI_COD check later in the if-else chain since the case for
ATAPI_COD to be set is rather unlikely in a normal operation. Also, add
a branch predictor hint for it. Generally, move all unlikely cases in
ireason checking further down in the code path.

In addition, add PFX for printks originating from ide-atapi. Finally,
remove ide_cd_check_ireason.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-atapi.c | 94 ++++++++++++++++++++++++++++++++++-------------
drivers/ide/ide-cd.c | 48 +-----------------------
include/linux/ide.h | 2 +
3 files changed, 71 insertions(+), 73 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 96aded6..2bbcfc4 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -10,6 +10,9 @@

#include <scsi/scsi.h>

+#define DRV_NAME "ide-atapi"
+#define PFX DRV_NAME ": "
+
#ifdef DEBUG
#define debug_log(fmt, args...) \
printk(KERN_INFO "ide: " fmt, ## args)
@@ -204,8 +207,8 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq)
GFP_NOIO);
if (unlikely(err)) {
if (printk_ratelimit())
- printk(KERN_WARNING "%s: failed to map sense buffer\n",
- drive->name);
+ printk(KERN_WARNING PFX "%s: failed to map sense "
+ "buffer\n", drive->name);
return;
}

@@ -226,7 +229,7 @@ int ide_queue_sense_rq(ide_drive_t *drive, void *special)
{
/* deferred failure from ide_prep_sense() */
if (!drive->sense_rq_armed) {
- printk(KERN_WARNING "%s: failed queue sense request\n",
+ printk(KERN_WARNING PFX "%s: error queuing a sense request\n",
drive->name);
return -ENOMEM;
}
@@ -290,7 +293,7 @@ int ide_cd_expiry(ide_drive_t *drive)
break;
default:
if (!(rq->cmd_flags & REQ_QUIET))
- printk(KERN_INFO "cmd 0x%x timed out\n",
+ printk(KERN_INFO PFX "cmd 0x%x timed out\n",
rq->cmd[0]);
wait = 0;
break;
@@ -324,6 +327,56 @@ void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason)
EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason);

/*
+ * Check the contents of the interrupt reason register and attempt to recover if
+ * there are problems.
+ *
+ * Returns:
+ * - 0 if everything's ok
+ * - 1 if the request has to be terminated.
+ */
+int ide_check_ireason(ide_drive_t *drive, struct request *rq, int len,
+ int ireason, int rw)
+{
+ ide_hwif_t *hwif = drive->hwif;
+
+ debug_log("ireason: 0x%x, rw: 0x%x\n", ireason, rw);
+
+ if (ireason == (!rw << 1))
+ return 0;
+ else if (ireason == (rw << 1)) {
+ printk(KERN_ERR PFX "%s: %s: wrong transfer direction!\n",
+ drive->name, __func__);
+
+ if (dev_is_idecd(drive))
+ ide_pad_transfer(drive, rw, len);
+ }
+ else if (!rw && ireason == ATAPI_COD) {
+ if (dev_is_idecd(drive)) {
+ /*
+ * some drives (ASUS) seem to tell us that status info
+ * is available. Just get it and ignore.
+ */
+ (void)hwif->tp_ops->read_status(hwif);
+ return 0;
+ }
+ } else {
+ if (unlikely(ireason & ATAPI_COD))
+ printk(KERN_ERR PFX "%s: CoD != 0 in %s\n", drive->name,
+ __func__);
+
+ /* drive wants a command packet, or invalid ireason... */
+ printk(KERN_ERR PFX "%s: %s: bad interrupt reason 0x%02x\n",
+ drive->name, __func__, ireason);
+ }
+
+ if (dev_is_idecd(drive) && rq->cmd_type == REQ_TYPE_ATA_PC)
+ rq->cmd_flags |= REQ_FAILED;
+
+ return 1;
+}
+EXPORT_SYMBOL_GPL(ide_check_ireason);
+
+/*
* This is the usual interrupt handler which will be called during a packet
* command. We will transfer some of the data (as requested by the drive)
* and will re-point interrupt handler to us.
@@ -357,7 +410,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)

if (rc || (drive->media == ide_tape && (stat & ATA_ERR))) {
if (drive->media == ide_floppy)
- printk(KERN_ERR "%s: DMA %s error\n",
+ printk(KERN_ERR PFX "%s: DMA %s error\n",
drive->name, rq_data_dir(pc->rq)
? "write" : "read");
pc->flags |= PC_FLAG_DMA_ERROR;
@@ -389,8 +442,8 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
pc->rq->errors++;

if (rq->cmd[0] == REQUEST_SENSE) {
- printk(KERN_ERR "%s: I/O error in request sense"
- " command\n", drive->name);
+ printk(KERN_ERR PFX "%s: I/O error in request "
+ "sense command\n", drive->name);
return ide_do_reset(drive);
}

@@ -432,8 +485,8 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)

if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
- printk(KERN_ERR "%s: The device wants to issue more interrupts "
- "in DMA mode\n", drive->name);
+ printk(KERN_ERR PFX "%s: The device wants to issue more "
+ "interrupts in DMA mode\n", drive->name);
ide_dma_off(drive);
return ide_do_reset(drive);
}
@@ -441,19 +494,8 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
/* Get the number of bytes to transfer on this interrupt. */
ide_read_bcount_and_ireason(drive, &bcount, &ireason);

- if (ireason & ATAPI_COD) {
- printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
+ if (ide_check_ireason(drive, rq, bcount, ireason, write))
return ide_do_reset(drive);
- }
-
- if (((ireason & ATAPI_IO) == ATAPI_IO) == write) {
- /* Hopefully, we will never get here */
- printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
- "to %s!\n", drive->name,
- (ireason & ATAPI_IO) ? "Write" : "Read",
- (ireason & ATAPI_IO) ? "Read" : "Write");
- return ide_do_reset(drive);
- }

done = min_t(unsigned int, bcount, cmd->nleft);
ide_pio_bytes(drive, cmd, write, done);
@@ -501,13 +543,13 @@ static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)

while (retries-- && ((ireason & ATAPI_COD) == 0 ||
(ireason & ATAPI_IO))) {
- printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
+ printk(KERN_ERR PFX "%s: (IO,CoD != (0,1) while issuing "
"a packet command, retrying\n", drive->name);
udelay(100);
ireason = ide_read_ireason(drive);
if (retries == 0) {
- printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
- "a packet command, ignoring\n",
+ printk(KERN_ERR PFX "%s: (IO,CoD != (0,1) while issuing"
+ " a packet command, ignoring\n",
drive->name);
ireason |= ATAPI_COD;
ireason &= ~ATAPI_IO;
@@ -538,7 +580,7 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
u8 ireason;

if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) {
- printk(KERN_ERR "%s: Strange, packet command initiated yet "
+ printk(KERN_ERR PFX "%s: Strange, packet command initiated yet "
"DRQ isn't asserted\n", drive->name);
return startstop;
}
@@ -580,7 +622,7 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
ireason = ide_wait_ireason(drive, ireason);

if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) {
- printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
+ printk(KERN_ERR PFX "%s: (IO,CoD) != (0,1) while issuing "
"a packet command\n", drive->name);

return ide_do_reset(drive);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index f6fb29b..46c87a0 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -417,50 +417,6 @@ end_request:
return 2;
}

-/*
- * Check the contents of the interrupt reason register from the cdrom
- * and attempt to recover if there are problems. Returns 0 if everything's
- * ok; nonzero if the request has been terminated.
- */
-static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
- int len, int ireason, int rw)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- ide_debug_log(IDE_DBG_FUNC, "ireason: 0x%x, rw: 0x%x", ireason, rw);
-
- /*
- * ireason == 0: the drive wants to receive data from us
- * ireason == 2: the drive is expecting to transfer data to us
- */
- if (ireason == (!rw << 1))
- return 0;
- else if (ireason == (rw << 1)) {
-
- /* whoops... */
- printk(KERN_ERR PFX "%s: %s: wrong transfer direction!\n",
- drive->name, __func__);
-
- ide_pad_transfer(drive, rw, len);
- } else if (rw == 0 && ireason == 1) {
- /*
- * Some drives (ASUS) seem to tell us that status info is
- * available. Just get it and ignore.
- */
- (void)hwif->tp_ops->read_status(hwif);
- return 0;
- } else {
- /* drive wants a command packet, or invalid ireason... */
- printk(KERN_ERR PFX "%s: %s: bad interrupt reason 0x%02x\n",
- drive->name, __func__, ireason);
- }
-
- if (rq->cmd_type == REQ_TYPE_ATA_PC)
- rq->cmd_flags |= REQ_FAILED;
-
- return -1;
-}
-
static void ide_cd_request_sense_fixup(ide_drive_t *drive, struct ide_cmd *cmd)
{
struct request *rq = cmd->rq;
@@ -652,9 +608,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
goto out_end;
}

- /* check which way to transfer data */
- rc = ide_cd_check_ireason(drive, rq, len, ireason, write);
- if (rc)
+ if (ide_check_ireason(drive, rq, len, ireason, write))
goto out_end;

cmd->last_xfer_len = 0;
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 59aedcd..70a2c94 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1125,6 +1125,8 @@ void SELECT_MASK(ide_drive_t *, int);
u8 ide_read_error(ide_drive_t *);
void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);

+int ide_check_ireason(ide_drive_t *, struct request *, int, int, int);
+
int ide_check_atapi_device(ide_drive_t *, const char *);

void ide_init_pc(struct ide_atapi_pc *);
--
1.6.2.4


\
 
 \ /
  Last update: 2009-05-09 09:55    [W:0.141 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site