lkml.org 
[lkml]   [2009]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Input: add MAX7359 key switch controller driver
Hi Kim,

On Wed, May 06, 2009 at 03:21:24PM +0900, Kim Kyuwon wrote:
> The Maxim MAX7359 is a I2C interfaced key switch controller which provides microprocessors with management of up to 64 key switches.
> This patch adds support for the MAX7359 key switch controller.
>
> Signed-off-by: Kim Kyuwon <q1.kim@samsung.com>
> ---
> drivers/input/keyboard/Kconfig | 8 +
> drivers/input/keyboard/Makefile | 1 +
> drivers/input/keyboard/max7359_keypad.c | 300 +++++++++++++++++++++++++++++++
> include/linux/max7359_keypad.h | 30 +++
> 4 files changed, 339 insertions(+), 0 deletions(-)
> create mode 100644 drivers/input/keyboard/max7359_keypad.c
> create mode 100644 include/linux/max7359_keypad.h
>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index ea2638b..fb2dc08 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -332,4 +332,12 @@ config KEYBOARD_SH_KEYSC
>
> To compile this driver as a module, choose M here: the
> module will be called sh_keysc.
> +
> +config KEYBOARD_MAX7359
> + tristate "Maxim MAX7359 Key Switch Controller"
> + depends on I2C
> + help
> + If you say yes here you get support for the Maxim MAX7359 Key
> + Switch Controller chip. This providers microprocessors with
> + management of up to 64 key switches

"To compile this driver as a module..."

> endif
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index 36351e1..a9e7502 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -28,3 +28,4 @@ obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o
> obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
> obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
> obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
> +obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
> diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c
> new file mode 100644
> index 0000000..3c2ec01
> --- /dev/null
> +++ b/drivers/input/keyboard/max7359_keypad.c
> @@ -0,0 +1,300 @@
> +/*
> + * max7359_keypad.c - MAX7359 Key Switch Controller Driver
> + *
> + * Copyright (C) 2009 Samsung Electronics
> + * Kim Kyuwon <q1.kim@samsung.com>
> + *
> + * Based on pxa27x_keypad.c
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5456
> + */
> +
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/input.h>
> +#include <linux/max7359_keypad.h>
> +
> +#define MAX_KEY_NUM (8 * 8)

Please do:

#define MAX_KEY_NUM (MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS)

> +
> +/*
> + * MAX7359 registers
> + */
> +#define MAX7359_REG_KEYFIFO 0x00
> +#define MAX7359_REG_CONFIG 0x01
> +#define MAX7359_REG_DEBOUNCE 0x02
> +#define MAX7359_REG_INTERRUPT 0x03
> +#define MAX7359_REG_PORTS 0x04
> +#define MAX7359_REG_KEYREP 0x05
> +#define MAX7359_REG_SLEEP 0x06
> +
> +/*
> + * Configuration register bits
> + */
> +#define MAX7359_CFG_SLEEP (1 << 7)
> +#define MAX7359_CFG_INTERRUPT (1 << 5)
> +#define MAX7359_CFG_KEY_RELEASE (1 << 3)
> +#define MAX7359_CFG_WAKEUP (1 << 1)
> +#define MAX7359_CFG_TIMEOUT (1 << 0)
> +
> +struct max7359_keypad {
> + /* matrix key code map */
> + u16 keycodes[MAX_KEY_NUM];
> +
> + struct work_struct work;
> +
> + struct max7359_keypad_platform_data *pdata;
> + struct input_dev *input_dev;
> + struct i2c_client *client;
> +
> + u32 irq;
> +};
> +
> +static int max7359_write_reg(struct i2c_client *client, u8 reg, u8 val)
> +{
> + int ret = i2c_smbus_write_byte_data(client, reg, val);

Empty line after declarations please.

> + if (ret >= 0)
> + return 0;
> +
> + dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
> + __func__, reg, val, ret);
> +
> + return ret;
> +}
> +
> +static int max7359_read_reg(struct i2c_client *client, int reg)
> +{
> + int ret = i2c_smbus_read_byte_data(client, reg);
> + if (ret < 0)
> + dev_err(&client->dev, "%s: reg 0x%x, err %d\n",
> + __func__, reg, ret);
> + return ret;
> +}
> +
> +static void max7359_build_keycode(struct max7359_keypad *keypad)
> +{
> + struct max7359_keypad_platform_data *pdata = keypad->pdata;
> + struct input_dev *input_dev = keypad->input_dev;
> + unsigned int *key;
> + int i;
> +
> + key = pdata->key_map;
> + for (i = 0; i < pdata->key_map_size; i++, key++) {
> + int row = ((*key) >> 28) & 0xf;
> + int col = ((*key) >> 24) & 0xf;
> + short code = (*key) & 0xffff;
> +
> + keypad->keycodes[(row << 3) + col] = code;
> + set_bit(code, input_dev->keybit);
> + }
> +}
> +
> +static inline unsigned int max7359_lookup_matrix_keycode(
> + struct max7359_keypad *keypad, int row, int col)
> +{
> + return keypad->keycodes[(row << 3) + col];
> +}
> +
> +static void max7359_worker(struct work_struct *work)
> +{
> + struct max7359_keypad *keypad =
> + container_of(work, struct max7359_keypad, work);
> + int val, row, col, release;
> +
> + val = max7359_read_reg(keypad->client, MAX7359_REG_KEYFIFO);
> + row = val & 0x7;
> + col = (val >> 3) & 0x7;
> + release = val & 0x40;
> +
> + input_report_key(keypad->input_dev,
> + max7359_lookup_matrix_keycode(keypad, row, col), !release);
> + input_sync(keypad->input_dev);
> +
> + enable_irq(keypad->irq);
> +
> + dev_dbg(&keypad->client->dev, "key[%d:%d] %s\n", row, col,
> + (release ? "release" : "press"));
> +}
> +
> +static irqreturn_t max7359_interrupt(int irq, void *dev_id)
> +{
> + struct max7359_keypad *keypad = (struct max7359_keypad *) dev_id;
> +
> + if (!work_pending(&keypad->work)) {
> + disable_irq_nosync(keypad->irq);
> + schedule_work(&keypad->work);
> + } else {
> + dev_err(&keypad->client->dev,
> + "Another job is currently pending \n");

Is this truly an error?

> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void max7359_initialize(struct i2c_client *client)
> +{
> + max7359_write_reg(client, MAX7359_REG_CONFIG,
> + MAX7359_CFG_INTERRUPT | /* Irq clears after host read */
> + MAX7359_CFG_KEY_RELEASE | /* Key release enable */
> + MAX7359_CFG_WAKEUP); /* Key press wakeup enable */
> +
> + /* Full key-scan functionality */
> + max7359_write_reg(client, MAX7359_REG_DEBOUNCE, 0x1F);
> +
> + /* nINT asserts every debounce cycles */
> + max7359_write_reg(client, MAX7359_REG_INTERRUPT, 0x01);
> +}
> +
> +static int __devinit max7359_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct max7359_keypad *keypad;
> + struct max7359_keypad_platform_data *pdata;
> + struct input_dev *input_dev;
> + int ret;
> +
> + keypad = kzalloc(sizeof(struct max7359_keypad), GFP_KERNEL);
> + if (keypad == NULL) {
> + dev_err(&client->dev, "failed to allocate driver data\n");
> + return -ENOMEM;
> + }
> +
> + keypad->client = client;
> + pdata = keypad->pdata = client->dev.platform_data;
> + i2c_set_clientdata(client, keypad);
> +
> + /* Detect MAX7359: The initial Keys FIFO value is '0x3F' */
> + ret = max7359_read_reg(client, MAX7359_REG_KEYFIFO);
> + if (ret < 0) {
> + dev_err(&client->dev, "failed to detect device\n");
> + goto failed_free;
> + } else {
> + dev_info(&client->dev, "keys FIFO is 0x%02x"
> + ", succeeded in detecting device\n", ret);
> + }
> +
> + /* Initialize MAX7359 */
> + max7359_initialize(client);
> +
> + /* Create and register the input driver. */
> + input_dev = input_allocate_device();
> + if (!input_dev) {
> + dev_err(&client->dev, "failed to allocate input device\n");
> + ret = -ENOMEM;
> + goto failed_free;
> + }
> +
> + input_dev->name = client->name;
> + input_dev->id.bustype = BUS_I2C;
> + input_dev->dev.parent = &client->dev;
> +
> + input_set_drvdata(input_dev, keypad);
> +
> + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
> + input_dev->keycodesize = sizeof(keypad->keycodes[0]);
> + input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
> + input_dev->keycode = keypad->keycodes;
> +
> + keypad->input_dev = input_dev;
> +
> + max7359_build_keycode(keypad);
> +
> + INIT_WORK(&keypad->work, max7359_worker);
> +
> + keypad->irq = client->irq;
> + if (!keypad->irq) {
> + dev_err(&client->dev, "The irq number should not be zero\n");
> + goto failed_free_dev;
> + }
> +
> + ret = request_irq(keypad->irq, max7359_interrupt,
> + IRQF_TRIGGER_LOW, client->name, keypad);
> + if (ret) {
> + dev_err(&client->dev, "failed to register interrupt\n");
> + goto failed_free_dev;
> + }
> +
> + /* Register the input device */
> + ret = input_register_device(input_dev);
> + if (ret) {
> + dev_err(&client->dev, "failed to register input device\n");
> + goto failed_free_irq;
> + }
> +
> + return 0;
> +
> +failed_free_irq:
> + free_irq(keypad->irq, keypad);
> +failed_free_dev:
> + input_free_device(input_dev);
> +failed_free:
> + i2c_set_clientdata(client, NULL);
> + kfree(keypad);
> + return ret;
> +}
> +
> +static int __exit max7359_remove(struct i2c_client *client)

__devexit, not __exit.

> +{
> + struct max7359_keypad *keypad = i2c_get_clientdata(client);
> +
> + cancel_work_sync(&keypad->work);
> + input_unregister_device(keypad->input_dev);
> + free_irq(keypad->irq, keypad);
> + i2c_set_clientdata(client, NULL);
> + kfree(keypad);
> +
> + return 0;
> +}
> +
> +static int max7359_suspend(struct i2c_client *client, pm_message_t mesg)
> +{
> + /* If no keys are pressed, enter sleep mode for 8192 ms */

What happens if there are keys that are pressed?

> + max7359_write_reg(client, MAX7359_REG_SLEEP, 0x01);
> +
> + return 0;
> +}
> +
> +static int max7359_resume(struct i2c_client *client)
> +{
> + /* Restore the default setting (autosleep for 256 ms) */
> + max7359_write_reg(client, MAX7359_REG_SLEEP, 0x07);
> +
> + return 0;
> +}

Could we also have similar open and close? It seems prudent to be in low
power mode if there are no users of the device.

> +
> +static const struct i2c_device_id max7359_ids[] = {
> + { "max7359", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, max7359_ids);
> +
> +static struct i2c_driver max7359_i2c_driver = {
> + .driver = {
> + .name = "max7359",
> + },
> + .probe = max7359_probe,
> + .remove = __exit_p(max7359_remove),

__devexit_p();

> + .suspend = max7359_suspend,
> + .resume = max7359_resume,

Guard suspend/resume with #ifdef CONFIG_PM please.

> + .id_table = max7359_ids,
> +};
> +
> +static int __init max7359_init(void)
> +{
> + return i2c_add_driver(&max7359_i2c_driver);
> +}
> +module_init(max7359_init);
> +
> +static void __exit max7359_exit(void)
> +{
> + i2c_del_driver(&max7359_i2c_driver);
> +}
> +module_exit(max7359_exit);
> +
> +MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
> +MODULE_DESCRIPTION("MAX7359 Key Switch Controller Driver");
> +MODULE_LICENSE("GPL v2");

> diff --git a/include/linux/max7359_keypad.h b/include/linux/max7359_keypad.h
> new file mode 100644
> index 0000000..c9477a5
> --- /dev/null
> +++ b/include/linux/max7359_keypad.h
> @@ -0,0 +1,30 @@
> +/*
> + * max7359_keypad.h - MAX7359 Keypad Controller Driver
> + *
> + * Copyright (C) 2009 Samsung Electronics
> + * Kim Kyuwon <q1.kim@samsung.com>
> + *
> + * Based on pxa27x_keypad.c
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5456
> + */
> +
> +#ifndef _MAX7359_KEYPAD_H_
> +#define _MAX7359_KEYPAD_H_
> +
> +#define MAX_MATRIX_KEY_ROWS 8
> +#define MAX_MATRIX_KEY_COLS 8

These names are too generic, may clash with other #includes
eventially... adding MAX7359_ prefix seems prudent.

> +
> +struct max7359_keypad_platform_data {
> + /* code map for the keys */
> + unsigned int *key_map;
> + unsigned int key_map_size;
> +};
> +
> +#define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val))
> +
> +#endif /* _MAX7359_KEYPAD_H_ */
> --
> 1.5.2.5

Thanks.

--
Dmitry


\
 
 \ /
  Last update: 2009-05-08 05:23    [W:0.081 / U:1.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site