lkml.org 
[lkml]   [2009]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 6/7] x86/acpi: move setup io apic routing out of ACPI macro scope

so we could set io apic routing when ACPI is not set

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
arch/x86/include/asm/io_apic.h | 4 -
arch/x86/kernel/apic/io_apic.c | 122 ++++++++++++++++++++---------------------
2 files changed, 63 insertions(+), 63 deletions(-)
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -3840,6 +3840,67 @@ int __init arch_probe_nr_irqs(void)
}
#endif

+static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+ int triggering, int polarity)
+{
+ struct irq_desc *desc;
+ struct irq_cfg *cfg;
+ int node;
+
+ if (!IO_APIC_IRQ(irq)) {
+ apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
+ ioapic);
+ return -EINVAL;
+ }
+
+ if (dev)
+ node = dev_to_node(dev);
+ else
+ node = cpu_to_node(boot_cpu_id);
+
+ desc = irq_to_desc_alloc_node(irq, node);
+ if (!desc) {
+ printk(KERN_INFO "can not get irq_desc %d\n", irq);
+ return 0;
+ }
+
+ /*
+ * IRQs < 16 are already in the irq_2_pin[] map
+ */
+ if (irq >= NR_IRQS_LEGACY) {
+ cfg = desc->chip_data;
+ add_pin_to_irq_node(cfg, node, ioapic, pin);
+ }
+
+ setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
+
+ return 0;
+}
+
+static struct {
+ DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
+int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
+ int triggering, int polarity)
+{
+
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
+ * with redundant pin->gsi mappings (but unique PCI devices);
+ * we only program the IOAPIC on the first.
+ */
+ if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
+ pr_debug("Pin %d-%d already programmed\n",
+ mp_ioapics[ioapic].apicid, pin);
+ return 0;
+ }
+ set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
+
+ return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
+ triggering, polarity);
+}
+
/* --------------------------------------------------------------------------
ACPI-based IOAPIC Configuration
-------------------------------------------------------------------------- */
@@ -3934,67 +3995,6 @@ int __init io_apic_get_version(int ioapi
}
#endif

-static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
-{
- struct irq_desc *desc;
- struct irq_cfg *cfg;
- int node;
-
- if (!IO_APIC_IRQ(irq)) {
- apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
- ioapic);
- return -EINVAL;
- }
-
- if (dev)
- node = dev_to_node(dev);
- else
- node = cpu_to_node(boot_cpu_id);
-
- desc = irq_to_desc_alloc_node(irq, node);
- if (!desc) {
- printk(KERN_INFO "can not get irq_desc %d\n", irq);
- return 0;
- }
-
- /*
- * IRQs < 16 are already in the irq_2_pin[] map
- */
- if (irq >= NR_IRQS_LEGACY) {
- cfg = desc->chip_data;
- add_pin_to_irq_node(cfg, node, ioapic, pin);
- }
-
- setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
-
- return 0;
-}
-
-static struct {
- DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
-} mp_ioapic_routing[MAX_IO_APICS];
-
-int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
-{
-
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
- if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
- pr_debug("Pin %d-%d already programmed\n",
- mp_ioapics[ioapic].apicid, pin);
- return 0;
- }
- set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
-
- return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
- triggering, polarity);
-}
-
int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
{
int i;
Index: linux-2.6/arch/x86/include/asm/io_apic.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/io_apic.h
+++ linux-2.6/arch/x86/include/asm/io_apic.h
@@ -154,10 +154,10 @@ extern int timer_through_8259;
extern int io_apic_get_unique_id(int ioapic, int apic_id);
extern int io_apic_get_version(int ioapic);
extern int io_apic_get_redir_entries(int ioapic);
-extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin,
- int irq, int edge_level, int active_high_low);
#endif /* CONFIG_ACPI */

+extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin,
+ int irq, int edge_level, int active_high_low);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);


\
 
 \ /
  Last update: 2009-05-06 19:13    [from the cache]
©2003-2011 Jasper Spaans