lkml.org 
[lkml]   [2009]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/4] pci/x86: don't assume pref memio are 64bit -v4
On Thu, 23 Apr 2009 20:48:32 -0700
Yinghai Lu <yinghai@kernel.org> wrote:

>
> we should not assign 64bit range to pci device that only take 32bit
> pref
>
> try to set IORESOURCE_MEM_64 in 64bit resource of
> pci_device/pci_bridge and make the bus resource only have that bit
> set when all device under that do support 64bit pref mem then use
> that flag to allocate resource in wanted area
>
> v2: fix b_res->flags and logic and passing result.
> v3: split iomem to iomem32, iomem64, and iomem64 will take
> IORESOURCE_MEM_64 V4: according to Ivan
> make it support x86 only, by PCIBIOS_MAX_MEM_32
> double check if the bridge does support pref mem64 with
> write/read UPPER32
>
> [Impact: do assign wrong range to device that doesn't support it]

Thanks a lot Yinghai & Ivan, I applied 1 & 2 (the other 2 e820 patches
should go through Ingo), they're in my linux-next branch.

--
Jesse Barnes, Intel Open Source Technology Center


\
 
 \ /
  Last update: 2009-05-05 20:55    [W:0.206 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site