lkml.org 
[lkml]   [2009]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Patch 00/12] Hardware Breakpoint Interfaces
On Fri, 24 Apr 2009, K.Prasad wrote:

> Hi Alan,
> The following patches contain the changes mentioned below and is based
> on commit 335a1e07e2281795064b909aa75e3071609abd0e of -tip tree.
>
> The changes to passing of DR6 register value in traps.c is separated into
> [Patch 12/12]. kprobes and HW breakpoints have been found to work fine after
> the changes on an x86 box.
>
> Kindly let me know what you think of the changes.

They look pretty good. However some of the older stuff still needs
more work.

> --- /dev/null
> +++ arch/x86/include/asm/hw_breakpoint.h

> +void arch_install_thread_hw_breakpoint(struct task_struct *tsk);
> +void arch_uninstall_thread_hw_breakpoint(void);
> +void arch_install_kernel_hw_breakpoint(void *);

This routine doesn't exist, but maybe it should. See below...


> --- /dev/null
> +++ kernel/hw_breakpoint.c

> +int register_kernel_hw_breakpoint(struct hw_breakpoint *bp)
> +{
> + int rc;
> +
> + rc = arch_validate_hwbkpt_settings(bp, NULL);
> + if (rc)
> + return rc;
> +
> + spin_lock(&hw_breakpoint_lock);
> +
> + rc = -EINVAL;
> + /* Check if we are over-committing */
> + if ((hbp_kernel_pos > 0) && (!hbp_user_refcount[hbp_kernel_pos-1])) {
> + hbp_kernel_pos--;
> + hbp_kernel[hbp_kernel_pos] = bp;
> + on_each_cpu(arch_update_kernel_hw_breakpoints, NULL, 0);

You shouldn't call on_each_cpu() while holding a spinlock. The same
thing happens in unregister_kernel_hw_breakpoint().

> + rc = 0;
> + }
> +
> + spin_unlock(&hw_breakpoint_lock);
> + return rc;
> +}
> +EXPORT_SYMBOL_GPL(register_kernel_hw_breakpoint);
> +
> +/**
> + * unregister_kernel_hw_breakpoint - unregister a HW breakpoint for kernel space
> + * @bp: the breakpoint structure to unregister
> + *
> + * Uninstalls and unregisters @bp.
> + */
> +void unregister_kernel_hw_breakpoint(struct hw_breakpoint *bp)
> +{
> + int i, j;
> +
> + spin_lock(&hw_breakpoint_lock);
> +
> + /* Find the 'bp' in our list of breakpoints for kernel */
> + for (i = hbp_kernel_pos; i < HB_NUM; i++)
> + if (bp == hbp_kernel[i])
> + break;
> +
> + /* Check if we did not find a match for 'bp'. If so return early */
> + if (i == HB_NUM) {
> + spin_unlock(&hw_breakpoint_lock);
> + return;
> + }
> +
> + /*
> + * We'll shift the breakpoints one-level above to compact if
> + * unregistration creates a hole
> + */
> + for (j = i; j > hbp_kernel_pos; j--)
> + hbp_kernel[j] = hbp_kernel[j-1];

What happens if a kernel breakpoint is triggered on another CPU while
this loop is running? Or what happens if the breakpoint being removed
is triggered on another CPU before on_each_cpu() is called below?

Basically, it's impossible to change the kernel breakpoints
simultaneously on all CPUs. That means you somehow have to keep both
the old set and the new set around until all the CPUs are updated.

> +
> + hbp_kernel[hbp_kernel_pos] = NULL;
> + on_each_cpu(arch_update_kernel_hw_breakpoints, NULL, 0);
> + hbp_kernel_pos++;
> +
> + spin_unlock(&hw_breakpoint_lock);
> +}


> --- /dev/null
> +++ arch/x86/kernel/hw_breakpoint.c

> +/* Unmasked kernel DR7 value */
> +static unsigned long kdr7;
> +static const unsigned long kdr7_masks[HB_NUM + 1] = {
> + 0xffff00ff, /* LEN3, R/W3, G3, L3 */
> + 0xfff000fc, /* Same for 3, 2 */
> + 0xff0000f0, /* Same for 3, 2, 1 */
> + 0xf00f00c0, /* Same for 3, 2, 1, 0 */
> + 0x00000000 /* Dummy mask used when 'pos' is HB_NUM */
> +};

These comments are completely messed up. The comment on the first
line, "LEN3, R/W3, G3, L3", actually applies to the fourth value,
0xf00f00c0. Likewise for the others.

In the end this may not matter...


> +void arch_update_kernel_hw_breakpoints(void *unused)
> +{
> + struct hw_breakpoint *bp;
> + unsigned long dr7;
> + int i;
> +
> + get_debugreg(dr7, 7);
> + /* Don't allow debug exceptions while we update the registers */
> + set_debugreg(0UL, 7);
> +
> + /* Clear all kernel-space bits in kdr7 and dr7 before we set them */
> + kdr7 &= ~kdr7_masks[hbp_kernel_pos];
> + dr7 &= ~kdr7_masks[hbp_kernel_pos];

You probably should use current->thread.debugreg7 and eliminate the
dr7 variable entirely. That also means you can get rid of kdr7_masks,
and it means you can increment hpb_kernel_pos before doing the
on_each_cpu() call.

> +
> + for (i = hbp_kernel_pos; i < HB_NUM; i++) {
> + bp = hbp_kernel[i];
> + if (bp) {
> + kdr7 |= encode_dr7(i, bp->info.len, bp->info.type);
> + set_debugreg(hbp_kernel[i]->info.address, i);
> + }
> + }

Another problem: kdr7 is a global variable, and here you've got every
CPU recomputing it whenever a kernel breakpoint is added or removed.
It should be computed just once, before the on_each_cpu() call.

> +
> + dr7 |= kdr7;
> +
> + /* No need to set DR6 */
> + set_debugreg(dr7, 7);
> +}


> --- arch/x86/kernel/ptrace.c.orig
> +++ arch/x86/kernel/ptrace.c

> +static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data)
> +{
> + struct thread_struct *thread = &(tsk->thread);
> + unsigned long old_dr7 = thread->debugreg7;
> + int i, rc = 0;
> + int enabled;
> + unsigned len, type;
> + struct hw_breakpoint *bp;
> + /*
> + * We want to use allocated memory inside a spinlock and we use the
> + * trick below
> + */
> + int temp_mem_used = 0;
> + void *temp_mem = kzalloc(sizeof(struct hw_breakpoint), GFP_KERNEL);
> + if (!temp_mem)
> + temp_mem_used = -ENOMEM;

I don't think this is a good idea...

> +restore:
> + /*
> + * Loop through all the hardware breakpoints, making the
> + * appropriate changes to each.
> + */
> + spin_lock(&hw_breakpoint_lock);
> +
> + for (i = 0; i < HB_NUM; i++) {
> + enabled = decode_dr7(data, i, &len, &type);
> + bp = thread->hbp[i];
> +
> + if (!enabled) {
> + if (bp) {
> + __unregister_user_hw_breakpoint(i, tsk);
> + kfree(bp);
> + }
> + continue;
> + }
> +
> + if (!bp) {
> + rc = -ENOMEM;
> + if (temp_mem_used != -ENOMEM) {
> + bp = temp_mem;

What happens if several new breakpoints are present at the same time?
You'd end up using the same memory for all of them.

> + bp->info.address = thread->debugreg[i];
> + bp->triggered = ptrace_triggered;
> + bp->info.len = len;
> + bp->info.type = type;
> + temp_mem_used = 1;
> + rc = __register_user_hw_breakpoint(i, tsk, bp);
> + if (!rc)
> + set_tsk_thread_flag(tsk, TIF_DEBUG);
> + else
> + kfree(bp);
> + }
> + } else
> + rc = __modify_user_hw_breakpoint(i, tsk, bp);
> +
> + if (rc)
> + break;
> + }
> + spin_unlock(&hw_breakpoint_lock);
> +
> + /* If anything above failed, restore the original settings */
> + if (rc < 0) {
> + data = old_dr7;
> + goto restore;

And now if something went wrong, you have already freed the memory
holding the original breakpoint structures. It would be better to
keep them around until you know they aren't going to be needed.

Alan Stern



\
 
 \ /
  Last update: 2009-05-04 22:57    [W:6.912 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site