lkml.org 
[lkml]   [2009]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectJMicron SATA controller not available - bisected
    With current git the SATA DVD writer on my system is no longer detected, 
    and these errors show up:

    pci 0000:05:00.0: BAR 2: can't allocate resource
    pci 0000:05:00.0: BAR 3: can't allocate resource
    ahci 0000:05:00.0: device not available because of BAR 2 [0x00-0x07]
    collisions

    .. where 05:00.0 is this SATA controller where the DVD is plugged in:

    05:00.0 SATA controller: JMicron Technologies, Inc. 20360/20363 Serial
    ATA Controller (rev 03)

    This is an ICH10-based board that has the JMicron controller in addition
    to the onboard SATA. The drive works fine if plugged into one of the
    onboard ports, and also works fine with kernel 2.6.29 on the JMicron
    controller.

    I bisected the problem down to this commit:
    480b93b7837fb3cf0579a42f4953ac463a5b9e1e: PCI: centralize device setup code

    Note that this worked with recent 2.6.30-rc kernels until I had to reset
    the board's CMOS, so a change in a BIOS setting was probably a trigger.

    Marc



    \
     
     \ /
      Last update: 2009-05-27 04:59    [W:0.018 / U:61.016 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site