lkml.org 
[lkml]   [2009]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH] asm-generic: add a dma-mapping.h file
From
On Sun, 17 May 2009 22:45:21 +0000
Arnd Bergmann <arnd@arndb.de> wrote:

> h8300 and m32r currently do not provide a DMA mapping API
> and therefore cannot use the ATA drivers. This adds a
> generic version of dma-mapping.h for architectures that
> have none or very minimal actual support for DMA in hardware
> and makes the two architectures use it.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> On Sunday 17 May 2009 20:05:54 Jeff Garzik wrote:
>
> > That's what needs to happen. We provide no-op functions for e.g. PCI
> > and x86 DMI, for platforms where this support does not exist.
> >
> > Pretty much all architectures support some form of ATA. m68k, m32r,
> > h8300 and microblaze all have IDE interface, which means that libata
> > needs to work on that platform.
> >
> > The only !ATA arch in the entire kernel is s390, AFAICT.
>
> m68k only defines NO_DMA for Sun3 and Dragonball. Sun3 does
> not have ATA, Dragonball could probably just enable HAS_DMA.
>
> ---
> arch/h8300/Kconfig | 2 +-
> arch/h8300/include/asm/dma-mapping.h | 1 +
> arch/m32r/Kconfig | 2 +-
> arch/m32r/include/asm/dma-mapping.h | 1 +
> include/asm-generic/dma-mapping.h | 399 ++++++++++++++++++++++++++++++++++
> 5 files changed, 403 insertions(+), 2 deletions(-)
> create mode 100644 arch/h8300/include/asm/dma-mapping.h
> create mode 100644 arch/m32r/include/asm/dma-mapping.h
> create mode 100644 include/asm-generic/dma-mapping.h
>
> diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
> index 9420648..36a037d 100644
> --- a/arch/h8300/Kconfig
> +++ b/arch/h8300/Kconfig
> @@ -74,7 +74,7 @@ config NO_IOPORT
> def_bool y
>
> config NO_DMA
> - def_bool y
> + def_bool n
>
> config ISA
> bool
> diff --git a/arch/h8300/include/asm/dma-mapping.h b/arch/h8300/include/asm/dma-mapping.h
> new file mode 100644
> index 0000000..e7e1690
> --- /dev/null
> +++ b/arch/h8300/include/asm/dma-mapping.h
> @@ -0,0 +1 @@
> +#include <asm-generic/dma-mapping.h>
> diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
> index cabba33..57ad603 100644
> --- a/arch/m32r/Kconfig
> +++ b/arch/m32r/Kconfig
> @@ -35,7 +35,7 @@ config NO_IOPORT
> def_bool y
>
> config NO_DMA
> - def_bool y
> + def_bool n
>
> config HZ
> int
> diff --git a/arch/m32r/include/asm/dma-mapping.h b/arch/m32r/include/asm/dma-mapping.h
> new file mode 100644
> index 0000000..e7e1690
> --- /dev/null
> +++ b/arch/m32r/include/asm/dma-mapping.h
> @@ -0,0 +1 @@
> +#include <asm-generic/dma-mapping.h>
> diff --git a/include/asm-generic/dma-mapping.h b/include/asm-generic/dma-mapping.h
> new file mode 100644
> index 0000000..5a14fed
> --- /dev/null
> +++ b/include/asm-generic/dma-mapping.h
> @@ -0,0 +1,399 @@
> +#ifndef _ASM_GENERIC_DMA_MAPPING_H
> +#define _ASM_GENERIC_DMA_MAPPING_H
> +/*
> + * This provides a no-op variant of the DMA mapping API,
> + * for use by architectures that do not actually support
> + * DMA, or that are fully consistent and linear-mapped
> + * in their DMA implementation.
> + */
> +
> +#include <asm/scatterlist.h>
> +
> +/*
> + * If any driver asks for DMA, it's not supported.
> + */
> +#ifndef dma_supported
> +static inline int
> +dma_supported(struct device *dev, u64 mask)
> +{
> + return 0;
> +}
> +#endif
NACK'ed, sorry.

- these idndef tricks are really ugly and wrong.

- these functions are not generic at all.

- it's confusing to have two ways to handle this issue;
dma-mapping-broken.h and dma-mapping.h.


\
 
 \ /
  Last update: 2009-05-18 12:51    [W:0.079 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site