lkml.org 
[lkml]   [2009]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 20/22] amd64_edac: add EDAC core-related initializers
Date
From: Doug Thompson <dougthompson@xmission.com>

Borislav:

- add a amd64_free_mc_sibling_devices() helper instead of opencoding the
release-path.
- fix/cleanup comments
- fix function return value patterns
- cleanup debug calls

Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
drivers/edac/amd64_edac.c | 315 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 315 insertions(+), 0 deletions(-)

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 2807c97..ed3bb88 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -2454,4 +2454,319 @@ int amd64_process_error_info(struct mem_ctl_info *mci,
}
EXPORT_SYMBOL_GPL(amd64_process_error_info);

+/*
+ * The main polling 'check' function, called FROM the edac core to perform the
+ * error checking and if an error is encountered, error processing.
+ */
+static void amd64_check(struct mem_ctl_info *mci)
+{
+ struct amd64_error_info_regs info;
+
+ if (amd64_get_error_info(mci, &info))
+ amd64_process_error_info(mci, &info, 1);
+}
+
+/*
+ * Input:
+ * 1) struct amd64_pvt which contains pvt->dram_f2_ctl pointer
+ * 2) AMD Family index value
+ *
+ * Ouput:
+ * Upon return of 0, the following filled in:
+ *
+ * struct pvt->addr_f1_ctl
+ * struct pvt->misc_f3_ctl
+ *
+ * Filled in with related device funcitions of 'dram_f2_ctl'
+ * These devices are "reserved" via the pci_get_device()
+ *
+ * Upon return of 1 (error status):
+ *
+ * Nothing reserved
+ */
+static int amd64_reserve_mc_sibling_devices(struct amd64_pvt *pvt, int mc_idx)
+{
+ const struct amd64_family_type *amd64_dev = &amd64_family_types[mc_idx];
+
+ /* Reserve the ADDRESS MAP Device */
+ pvt->addr_f1_ctl = pci_get_related_function(pvt->dram_f2_ctl->vendor,
+ amd64_dev->addr_f1_ctl,
+ pvt->dram_f2_ctl);
+
+ if (!pvt->addr_f1_ctl) {
+ amd64_printk(KERN_ERR, "error address map device not found: "
+ "vendor %x device 0x%x (broken BIOS?)\n",
+ PCI_VENDOR_ID_AMD, amd64_dev->addr_f1_ctl);
+ return 1;
+ }
+
+ /* Reserve the MISC Device */
+ pvt->misc_f3_ctl = pci_get_related_function(pvt->dram_f2_ctl->vendor,
+ amd64_dev->misc_f3_ctl,
+ pvt->dram_f2_ctl);
+
+ if (!pvt->misc_f3_ctl) {
+ pci_dev_put(pvt->addr_f1_ctl);
+ pvt->addr_f1_ctl = NULL;
+
+ amd64_printk(KERN_ERR, "error miscellaneous device not found: "
+ "vendor %x device 0x%x (broken BIOS?)\n",
+ PCI_VENDOR_ID_AMD, amd64_dev->misc_f3_ctl);
+ return 1;
+ }
+
+ debugf1(" Addr Map device PCI Bus ID:\t%s\n",
+ pci_name(pvt->addr_f1_ctl));
+ debugf1(" DRAM MEM-CTL PCI Bus ID:\t%s\n",
+ pci_name(pvt->dram_f2_ctl));
+ debugf1(" Misc device PCI Bus ID:\t%s\n",
+ pci_name(pvt->misc_f3_ctl));
+
+ return 0;
+}
+
+static void amd64_free_mc_sibling_devices(struct amd64_pvt *pvt)
+{
+ pci_dev_put(pvt->addr_f1_ctl);
+ pci_dev_put(pvt->misc_f3_ctl);
+}
+
+/*
+ * Retrieve the hardware registers of the memory controller (this includes the
+ * 'Address Map' and 'Misc' device regs)
+ */
+static void amd64_read_mc_registers(struct amd64_pvt *pvt)
+{
+ u64 msr_val;
+ int dram, err = 0;
+
+ /*
+ * Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since
+ * those are Read-As-Zero
+ */
+ rdmsrl(MSR_K8_TOP_MEM1, msr_val);
+ pvt->top_mem = msr_val >> 23;
+ debugf0(" TOP_MEM=0x%08llx\n", pvt->top_mem);
+
+ /* check first whether TOP_MEM2 is enabled */
+ rdmsrl(MSR_K8_SYSCFG, msr_val);
+ if (msr_val & (1U << 21)) {
+ rdmsrl(MSR_K8_TOP_MEM2, msr_val);
+ pvt->top_mem2 = msr_val >> 23;
+ debugf0(" TOP_MEM2=0x%08llx\n", pvt->top_mem2);
+ } else
+ debugf0(" TOP_MEM2 disabled.\n");
+
+ amd64_cpu_display_info(pvt);
+
+ err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCAP, &pvt->nbcap);
+ if (err)
+ goto err_reg;
+
+ if (pvt->ops->read_dram_ctl_register)
+ pvt->ops->read_dram_ctl_register(pvt);
+
+ for (dram = 0; dram < DRAM_REG_COUNT; dram++) {
+ /*
+ * Call CPU specific READ function to get the DRAM Base and
+ * Limit values from the DCT.
+ */
+ pvt->ops->read_dram_base_limit(pvt, dram);
+
+ /*
+ * Only print out debug info on rows with both R and W Enabled.
+ * Normal processing, compiler should optimize this whole 'if'
+ * debug output block away.
+ */
+ if (pvt->dram_rw_en[dram] != 0) {
+ debugf1(" DRAM_BASE[%d]: 0x%8.08x-%8.08x "
+ "DRAM_LIMIT: 0x%8.08x-%8.08x\n",
+ dram,
+ (u32)(pvt->dram_base[dram] >> 32),
+ (u32)(pvt->dram_base[dram] & 0xFFFFFFFF),
+ (u32)(pvt->dram_limit[dram] >> 32),
+ (u32)(pvt->dram_limit[dram] & 0xFFFFFFFF));
+ debugf1(" IntlvEn=%s %s %s "
+ "IntlvSel=%d DstNode=%d\n",
+ pvt->dram_IntlvEn[dram] ?
+ "Enabled" : "Disabled",
+ (pvt->dram_rw_en[dram] & 0x2) ? "W" : "!W",
+ (pvt->dram_rw_en[dram] & 0x1) ? "R" : "!R",
+ pvt->dram_IntlvSel[dram],
+ pvt->dram_DstNode[dram]);
+ }
+ }
+
+ amd64_read_dct_base_mask(pvt);
+
+ err = pci_read_config_dword(pvt->addr_f1_ctl, K8_DHAR, &pvt->dhar);
+ if (err)
+ goto err_reg;
+
+ amd64_read_dbam_reg(pvt);
+
+ err = pci_read_config_dword(pvt->misc_f3_ctl,
+ F10_ONLINE_SPARE, &pvt->online_spare);
+ if (err)
+ goto err_reg;
+
+ err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0);
+ if (err)
+ goto err_reg;
+
+ err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCHR_0, &pvt->dchr0);
+ if (err)
+ goto err_reg;
+
+ if (!dct_ganging_enabled(pvt)) {
+ err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_1,
+ &pvt->dclr1);
+ if (err)
+ goto err_reg;
+
+ err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCHR_1,
+ &pvt->dchr1);
+ if (err)
+ goto err_reg;
+ }
+
+ amd64_dump_misc_regs(pvt);
+
+err_reg:
+ debugf0("Reading an MC register failed\n");
+
+}
+
+/*
+ * NOTE: CPU Revision Dependent code
+ *
+ * Input:
+ * @csrow_nr ChipSelect Row Number (0..CHIPSELECT_COUNT-1)
+ * k8 private pointer to -->
+ * DRAM Bank Address mapping register
+ * node_id
+ * DCL register where dual_channel_active is
+ *
+ * The DBAM register consists of 4 sets of 4 bits each definitions:
+ *
+ * Bits: CSROWs
+ * 0-3 CSROWs 0 and 1
+ * 4-7 CSROWs 2 and 3
+ * 8-11 CSROWs 4 and 5
+ * 12-15 CSROWs 6 and 7
+ *
+ * Values range from: 0 to 15
+ * The meaning of the values depends on CPU revision and dual-channel state,
+ * see relevant BKDG more info.
+ *
+ * The memory controller provides for total of only 8 CSROWs in its current
+ * architecture. Each "pair" of CSROWs normally represents just one DIMM in
+ * single channel or two (2) DIMMs in dual channel mode.
+ *
+ * The following code logic collapses the various tables for CSROW based on CPU
+ * revision.
+ *
+ * Returns:
+ * The number of PAGE_SIZE pages on the specified CSROW number it
+ * encompasses
+ *
+ */
+static u32 amd64_csrow_nr_pages(int csrow_nr, struct amd64_pvt *pvt)
+{
+ u32 dram_map, nr_pages;
+
+ /*
+ * The math on this doesn't look right on the surface because x/2*4 can
+ * be simplified to x*2 but this expression makes use of the fact that
+ * it is integral math where 1/2=0. This intermediate value becomes the
+ * number of bits to shift the DBAM register to extract the proper CSROW
+ * field.
+ */
+ dram_map = (pvt->dbam0 >> ((csrow_nr / 2) * 4)) & 0xF;
+
+ nr_pages = pvt->ops->dbam_map_to_pages(pvt, dram_map);
+
+ /*
+ * If dual channel then double the memory size of single channel.
+ * Channel count is 1 or 2
+ */
+ nr_pages <<= (pvt->channel_count - 1);
+
+ debugf0(" (csrow=%d) DBAM map index= %d\n", csrow_nr, dram_map);
+ debugf0(" nr_pages= %u channel-count = %d\n",
+ nr_pages, pvt->channel_count);
+
+ return nr_pages;
+}
+
+/*
+ * Initialize the array of csrow attribute instances, based on the values
+ * from pci config hardware registers.
+ */
+static int amd64_init_csrows(struct mem_ctl_info *mci)
+{
+ struct csrow_info *csrow;
+ struct amd64_pvt *pvt;
+ u64 input_addr_min, input_addr_max, sys_addr;
+ int i, err = 0, empty = 1;
+
+ pvt = mci->pvt_info;
+
+ err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCFG, &pvt->nbcfg);
+ if (err)
+ debugf0("Reading K8_NBCFG failed\n");
+
+ debugf0("NBCFG= 0x%x CHIPKILL= %s DRAM ECC= %s\n", pvt->nbcfg,
+ (pvt->nbcfg & K8_NBCFG_CHIPKILL) ? "Enabled" : "Disabled",
+ (pvt->nbcfg & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled"
+ );
+
+ for (i = 0; i < CHIPSELECT_COUNT; i++) {
+ csrow = &mci->csrows[i];
+
+ if ((pvt->dcsb0[i] & K8_DCSB_CS_ENABLE) == 0) {
+ debugf1("----CSROW %d EMPTY for node %d\n", i,
+ pvt->mc_node_id);
+ continue;
+ }
+
+ debugf1("----CSROW %d VALID for MC node %d\n",
+ i, pvt->mc_node_id);
+
+ empty = 0;
+ csrow->nr_pages = amd64_csrow_nr_pages(i, pvt);
+ find_csrow_limits(mci, i, &input_addr_min, &input_addr_max);
+ sys_addr = input_addr_to_sys_addr(mci, input_addr_min);
+ csrow->first_page = (u32) (sys_addr >> PAGE_SHIFT);
+ sys_addr = input_addr_to_sys_addr(mci, input_addr_max);
+ csrow->last_page = (u32) (sys_addr >> PAGE_SHIFT);
+ csrow->page_mask = ~mask_from_dct_mask(pvt, i);
+ /* 8 bytes of resolution */
+
+ csrow->mtype = amd64_determine_memory_type(pvt);
+
+ debugf1(" for MC node %d csrow %d:\n", pvt->mc_node_id, i);
+ debugf1(" input_addr_min: 0x%lx input_addr_max: 0x%lx\n",
+ (unsigned long)input_addr_min,
+ (unsigned long)input_addr_max);
+ debugf1(" sys_addr: 0x%lx page_mask: 0x%lx\n",
+ (unsigned long)sys_addr, csrow->page_mask);
+ debugf1(" nr_pages: %u first_page: 0x%lx "
+ "last_page: 0x%lx\n",
+ (unsigned)csrow->nr_pages,
+ csrow->first_page, csrow->last_page);
+
+ /*
+ * determine whether CHIPKILL or JUST ECC or NO ECC is operating
+ */
+ if (pvt->nbcfg & K8_NBCFG_ECC_ENABLE)
+ csrow->edac_mode =
+ (pvt->nbcfg & K8_NBCFG_CHIPKILL) ?
+ EDAC_S4ECD4ED : EDAC_SECDED;
+ else
+ csrow->edac_mode = EDAC_NONE;
+ }
+
+ return empty;
+}

--
1.6.2.4



\
 
 \ /
  Last update: 2009-05-15 14:57    [W:0.140 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site